HP 316095-B21 - StorageWorks Edge Switch 2/24 Release Note page 7

Firmware files are included in the upgrade process, but release rules are not. Since
release rules are required when sending another firmware version to a switch, an error
results. To avoid this problem, add the latest firmware file to the firmware library. This
also adds the new release rules and resolves the problem.
HAFM 07.02.00 is not removed after upgrading to HAFM 08.xx.xx, and if the server is
rebooted, both 07.xx.xx and 08.xx.xx services are started. Be sure to remove 07.02.00
after upgrading to 08.xx.xx.
Important information
This section describes important information related to the HAFM software, the Edge
Switch 2/24, Edge Switch 2/32, Director 2/64, and Director 2/140.
Features not supported in this release
The following director and edge switch feature is not supported in this release:
• SANtegrity Authentication
The following HAFM features are not supported in this release:
• SANtegrity Security Center
• Group Configuration Manager
These features are described in the documentation released with firmware 07.00.00 and
HAFM 08.06.00. Some of these features may be available in a future release.
Documentation released with firmware 07.00.00 and HAFM 08.06.00
To support these products, we are providing documentation from both McDATA
Corporation (the product developer) and from HP (the product OEM). The HP documents
include all information HP has incorporated into the products to date. The McDATA
documents include only the basic product information.
HA-Fabric Manager release notes
5