HP 316095-B21 - StorageWorks Edge Switch 2/24 Release Note page 27

Port Fencing dialog box may not reflect correct count of Affected Ports in ISL
Thresholds table
This usually occurs when a policy has been applied to an entire switch and there are
already ports with a threshold policy applied, even when it is selected not to replace the
existing policy on the switch ports.
User-defined nicknames for node devices do not show in Connection Properties
If you select Show Route between two node devices with user-defined Nicknames, the
Nicknames for these nodes do not display in the Connection Properties when you
double-click the route.
Port WWN is listed in the Node WWN field of Properties dialog box of a
node device
When you right click on a node device in the Product List, and select Properties from the
popup menu, the Properties dialog displays the Port WWN in the Node WWN field
Error message window may display after you close the HAFM application
An error message stating "Operation failed" may display after exiting an HAFM
application which manages a large number of devices. This message is incorrect and
should be ignored.
Modem-based Call Home Configuration icon still appears after LAN-based
Call Home is installed
The Call Home Configuration icon that is used when the modem-based call home has
been selected during HAFM installation, still appears when the LAN-based call home
has been selected during HAFM installation. The Call Home Configuration icon also
appears in the Windows Start menu:
Start > Programs > HP StorageWorks ha-fabric manager 8.6 > Call Home Configuration
Double clicking this icon or selecting this via the Windows Start menu when LAN-based
call home has been selected produces the following error message: Unable to
access Call Home phone book - Please contact your service
representative. This has no impact on the functionality of the LAN based call
home. Following the installation instructions for LAN based Call Home enables this
function. There is no need to contact a service representative.
Workaround
If you installed the LAN based Call-Home feature, do not use the icon for Call Home
Configuration or the Call Home Configuration icon that appears in the Windows Start
menu.
HA-Fabric Manager release notes
25