HP 316095-B21 - StorageWorks Edge Switch 2/24 Manual: Upgrading To Hafm 8.8; Hafm Platform

Hafm sw 08.08.00 hp storageworks ha-fabric manager transition guide (aa-rv1md-te, january 2006).
Hide thumbs

Advertisement

1

Upgrading to HAFM 8.8

This chapter provides instructions and considerations for upgrading software and migrating data
from HAFM 7.x or 8.x to HAFM 8.8. Information is also included on configuration tasks that you
should perform after upgrading.
This chapter includes:
• HAFM
platform, page 9
• Remote client system
• Upgrade
considerations, page 11
• Upgrade and migration
• Data migration from HAFM 7.x to
• Post-upgrade configuration
• Reverting to HAFM
• Removing the HAFM
• Removing HAFM
• Product license and feature
HAFM platform
HAFM 8.x is supported only on the 1unit-high (1 U-high) rack-mount HAFM appliance. Due to
memory and other limitations of previous notebook server platforms, you cannot install HAFM 8.x
on a notebook sever. The HAFM appliance is required for release 8.x and all future HAFM releases.
The HAFM appliance and related applications provide a GUI to monitor and manage HP products.
The HAFM appliance is a dedicated hardware and software solution that should not be used for
other tasks. HP tests the HAFM application installed on the HAFM appliance, but HP does not test
for compatibility with third-party software.
CAUTION:
Modifications to the HAFM appliance hardware or installation of additional software
(including patches or service packs) may interfere with normal operation.
Figure 1
shows the 1U-high rack-mount HAFM appliance.
Figure 1
1U-high rack-mount HAFM appliance
requirements, page 10
procedures, page 12
8.x, page 18
tasks, page 20
8.x, page 21
application, page 21
services, page 21
keys, page 21
HA-Fabric Manager transition guide
9

Advertisement

   Related Manuals for HP 316095-B21 - StorageWorks Edge Switch 2/24

Comments to this Manuals

Symbols: 0
Latest comments: