HP A5272A - SureStore E Disk System SC10 Storage Enclosure Service Manual page 33

2. Loosen the screw from the power supply handle.
Figure 5-2 Captive Screw on Power Supply Handle
3. Pull the handle down to disengage the power supply from the
4. Pull the power supply out of the chassis. Support the far end of the
Chapter 5
backplane.
supply with your free hand as it clears the chassis.
Replace the power supply immediately if the product is in use (see
next step).
Removal and Replacement
Removing and Replacing the Power Supply
Captive Screw
33