Error Rate; Media Defects; Load/Unload Function - Fujitsu MHS2030AT - 2.5" Notebook 30GB Drive Product Manual

1.8 Error Rate

Known defects, for which alternative blocks can be assigned, are not included in
the error rate count below. It is assumed that the data blocks to be accessed are
evenly distributed on the disk media.
(1) Unrecoverable read error
Read errors that cannot be recovered by maximum read retries of drive without
user's retry and ECC corrections shall occur no more than 10 times when reading
data of 10
recovery procedure, and include read retries accompanying head offset
operations.
(2) Positioning error
Positioning (seek) errors that can be recovered by one retry shall occur no more
than 10 times in 10

1.9 Media Defects

Defective sectors are replaced with alternates when the disk (the MHS Series) are
formatted prior to shipment from the factory (low level format). Thus, the hosts
see a defect-free devices.
Alternate sectors are automatically accessed by the disk drive. The user need not
be concerned with access to alternate sectors.

1.10Load/Unload Function

The Load/Unload function is a mechanism that loads the head on the disk and
unloads the head from the disk.
The product supports a minimum of 300,000 normal Load/Unload cycles.
Normal Unload is a normal head unloading operation and the commands listed
below are executed.
Hard Reset
Standby
Standby immediate
Sleep
Idle
C141-E171-03EN
14
bits. Read retries are executed according to the disk drive's error
7
seek operations.
1.8 Error Rate
1-11