Toshiba 32TL515U Owner's Manual page 53

Native
(for 480i (HDMI), 480p (HDMI), 720p, 1080i, and1080p signal
programs)
0 0 0
000
• If receiving a 1080i, 1080p, 720p, 480i (HDMI), or
480p (HDMI) signal program, the video is scaled to
display the entire picture within the borders of the
screen (i.e. no overscanning).
° This is especially useful for external HD sources
such as DVHS movies, Video Games, or PC
graphics.
° None of the picture is hidden.
Note:
• This mode is supported only for HDMI (1080i, 1080p,
720p, 480L and 480p), ColorStream ® (1080i and
720p), and ANT/CABLE (digital) inputs (1080L 1080p,
and 720p).
• Depending on the input signal the picture's border
may be hidden, displayed in black, or noisy.
4:3
000
000
Some program formats will display with sidebars and/or
bars at the top and bottom.
Full
(for 16:g [4801, 480p] source programs only)
10o01 o o o i
If receiving a squeezed 4:3 format program, the picture is
stretched horizontally to fill the width of the screen but
not stretched vertically.
(for10801, 1 080p,and720pprogram sources)
[+++]i+++
000< 000
The edges of the picture may be hidden.
TheaterWide 1
(for4:3format p rograms)
I©O
The center of the picture remains close to its original
proportions, but the left and right edges are stretched
horizontally to fill the screen.
TheaterWide 2
(for letter box programs)
°°°-
O0
The picture's top and bottom edges may be hidden*.
TheaterWide 3
(for letter box programswith subtitles)
I0001 I0 0 0
The picture's top and bottom edges are hidden*.
Normal
(forSVGA, X GA, W XGA, a ndSXGA sources)
Iooo
!ooo'
This size is a non-stretched display. Some input signal
formats will display with sidebars and/or bars at the top
and bottom.
DotbyDot
(forSVGA, X GA, W XGA, a ndSXGA sources
"Dot by Dot" is a non-scaling display. Depending on the
input signal format, the picture is displayed with sidebars
and/or bars at the top and bottom. (Example: SVGA
input source)
* To view the hidden areas (such as subtitles or captions), see
"Scrolling the picture" (_, p. 54).
53