Using Channel Return; Selecting The Video Input To View - Toshiba 32TL515U Owner's Manual

Using Channel Return
You can switch between two channels without entering
a channel number each time. This feature also works for
external inputs.
1 Select the first channel you want to view.
2 Select a second channel using the Channel Number
buttons (and the dash (EE3) button if needed).
{3 Each time you press _, the TV switches back and
forth between the last two channels that were
tuned.
UsingSurfLock
TM
The SurfLock '_' feature temporarily memorizes one
channel to the _ button so it can be quickly returned
to from any other channel. This feature also works for
external inputs.
To memorize a channel to the _ button:
1 Tune the channel you want to program to the
button.
2
3
Press and hold _1 for about 2 seconds until the
message "Memorized" appears. The channel has
been programmed to the _ button.
You can then change channels repeatedly, and
when you press _, the memorized channel will
be tuned.
After pressing _ and then changing channels again,
the memory is cleared and the button functions as
Channel Return.
Selecting the video input to view
To select the video input to view:
1
Press _ on the remote control or TV control
panel.
2 Change the input:
° Press 0-8.
* Repeatedly press • or V. Press @.
* Repeatedly press _6q.
Note:
• You can label the video input sources according to the
specific devices you have connected to the TV
(_ "Labefing video inputs" on p. 32).
° You can skip sources (_ "Skipping video inputs" on p.
31).
° Inputs that are set to be skipped will not be available and
will be skipped when selecting inputs by repeatedly
pressing _] or • or Y
° You can selectinputs thatare set to be skippedusing the
number buttons.
° If one or more HDMF _ CEC devices are connected to an
HDMI input, the icon (l) appears in the input selector.
In this case, the label (_ p. 32) will not appear in the
input selector.
° When the Auto Input feature is set, you can select a video
input source with the remote control by pressing and
holding the corresponding MODE SELECT button for 2
seconds (_ p. 33).
To select an HDMI ® CEC device:
1
Press • or • to select an HDMI input.
2
Press ,. The list of HDMI ¢_CEC devices for that
input appears.
{3 If the input has multiple HDMI ® CEC devices, use
• or • to select a device.
4 Press @.
41