Usingthe TV remote and HDMI® CECControl to control other devices
To control
the basic functions
of connected
audio/video
devices
using
the TV's remote
control,
connect
an HDMI ®
CEC compatible
audio
receiver
or playback
device.
The HDMI ® CEC Control
feature
uses CEC technology
as
regulated
by the HDMI standard.
Playback device
Audio receiver
(HDMI ® CECDVD player,etc.)
HDMI cable
To connect
an audio receiver
and playback
devices,
you will need:
°HDMI
cables
(_
p. 15)
Note:
• If several devices are connected,
HDMI ® CEC Control feature may not operate properly.
• For proper operation, it is recommended
that you use HDMI cables with the HDMI Logo (I-.l_rTH).
Before
controlling
the devices:
• For an explanation
of setup
and operations,
see "Using
HDMI ® CEC Control"
(_
p. 46).
• Configure
the connected
devices.
See each device's
operation
manual.
Note: This feature is limited to models incorporating
Toshiba's HDM/® CEC Control feature. However, Toshiba is not liable
for those operations.
See the individual instruction manuals for compatibility
information.
When
using
an external
AV amplifier:
The picture
and sound
may not be properly
synchronized.
In this case, adjust
the delay
time of the sound
on the AV
amplifier.
Note: The control range of the delay time differs according
to the device you use.
Connecting an HDMI audio system
If your HDMI
amplifier
supports
ARC, audio
from
the TV can be sent to the amplifier
via an existing
HDMI
cable.
You will need:
° HDMI cable
TV back panel
l= _
AVamplifier t hat
HDMI
cable
supports A RC
Note: Only HDMI 1 supports ARC.
HDMrs ARC(AudioReturnChannel)feature
This feature
enables
the audio
signal of the TV to
be sent to an AV amplifier
via the HDMI
cable. It
will not be necessary
to connect
a cable from
the
audio
output
of the TV to the audio
input
of the
AV amplifier
to reproduce
the audio
received
from the tuner
of the TV through
the AV
amplifier.
21