Receive Modes Settings; Ring Delay; F/T Ring Time (Fax/Tel Mode Only) - Brother IntelliFax-2840 Basic User's Manual

Receive Modes
settings

Ring Delay

The Ring Delay setting sets the number of
times the machine rings before it answers in
Fax Only and Fax/Tel modes.
If you have external or extension telephones
on the same line as the machine, keep the
Ring Delay setting of 4. (See Easy Receive
uu page 30 and Using external and
extension telephones uu page 39.)
a
Make sure you are in FAX mode
b
Press Menu, 2, 1, 1.
Setup Receive
1.Ring Delay
c
Press a or b to choose 00, 01, 02, 03 or
04 for how many times the line rings
before the machine answers.
Press OK.
Note
If you choose 00, the machine will answer
immediately and the line will not ring at all.
d
Press Stop/Exit.
F/T Ring Time
(Fax/Tel mode only)
5
When somebody calls your machine, you and
your caller will hear the normal telephone ring
5
sound. The number of rings is set by the Ring
Delay setting.
If the call is a fax, then your machine will
receive it; however, if it is a voice call the
machine will sound the F/T ring (a fast
double-ring) for the time you have set in the
F/T Ring Time setting. If you hear the F/T ring
it means that you have a voice caller on the
line.
Because the F/T ring is made by the machine,
. extension and external telephones will not
ring; however, you can still answer the call on
any telephone. (For more information, see
Using Remote Codes uu page 39.)
a
Make sure you are in FAX mode
b
Press Menu, 2, 1, 2.
Setup Receive
2.F/T Ring Time
c
Press a or b to choose how long the
machine will ring to alert you that you
have a voice call (20, 30, 40 or
70 seconds).
Press OK.
d
Press Stop/Exit.
Receiving a fax
5
5
.
29