NEC E463 User Manual page 5

15� The display complies with the recommended safety standards
for stability� Do not put excessive force on the front or top of
the cabinet� This could cause the product to tip over and cause
damage and/or personal injury�
16� If monitor or glass is broken, do not come in contact with the liquid
crystal and handle with care�
17� Follow instructions for wall, shelf or ceiling mounting as
recommended by the manufacturer�
18� An outdoor antenna should not be located near overhead power
lines or any electrical circuits�
19� If an outside antenna is connected to the receiver, confirm that the
antenna system is grounded to protect against voltage surges and
built up static charges� Section 810 of the National Electric Code,
ANSI/NFPA No� 70-1984, provides information with respect to
proper grounding for the mast and supporting structure, grounding
of the lead-in wire to an antenna discharge unit, size of grounding
connectors, location of antenna discharge unit, connection
to grounding electrodes and requirements for the grounding
electrode�
20� Rest your eyes periodically by focusing on an object at least 5 feet
away� Blink often�
21� Do not place any heavy objects on the power cord�
Damage to the cord may cause shock or fire.
22� Do not use monitor in high temperature, humid, dusty, or oily
areas�
23� Do not bend, crimp or otherwise damage the power cord�
NOTE: To the display system installer: This reminder is provided
to call attention to Article 820-44 of the National Electric Code that
provides guidelines for proper grounding and, in particular, specifies
that the cable ground shall be connected to the grounding system of
the facility, as reasonably close to the point of cable entry as possible
English-3