Troubleshooting - Uniden HOMEPATROL-1 Owner's Manual

Scanning radio
Hide thumbs Also See for HOMEPATROL-1:
Table of Contents

Advertisement

 

TROUBLESHOOTING

 
Problem 
My HomePatrol-1 won't turn
on.
My HomePatrol-1 won't stop
on any channels.
HomePatrol-1 stops on a
channel but I can't hear
anything.
Weather monitoring won't
work.
My HomePatrol-1 won't turn
off.
Recording and Replay do not
work.
I have another
question...where can I go for
help?
 
 
Try this... 
Hold the power button down for at least 3 seconds.
Check that the unit is receiving power.
Verify that the batteries are inserted correctly.
If it is connected to a power adapter, verify that the adapter
is receiving power.
Check for Avoided channels.
Adjust antenna.
Adjust Range.
Adjust Squelch.
Adjust Atten.
Move the unit to a different location.
Verify that MUTE is not on.
Check the volume.
Adjust the antenna.
Adjust the Squelch.
There might not be a NOAA broadcast in your area. Move
to an area with a known NOAA broadcast to verify.
Make sure you are holding the power button down long
enough. Press and hold for at least 3 – 5 seconds.
Because HomePatrol-1 writes data to the SD memory card
during these operations, they are disabled if you are
operating from external power only, with batteries not
installed, or if battery power becomes too low when
operating from batteries.
Visit the HomePatrol community at
http://www.HomePatrol.com
well as to discuss your HomePatrol-1 experiences with
other users.
26 
for official help and support, as

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents