Nokia HF 200 - Speakerphone - Bluetooth hands-free User Manual page 11

microphone is in front of you.
During a call, the green indicator
light is displayed.
If your device supports last
number redial with the
speakerphone, press the answer/
end key twice when no call is in
progress.
If your device supports voice
dialling with the speakerphone,
press the answer/end key when no
call is in progress, and proceed as
described in the user guide of your
device.
To answer the call, press the
answer/end key. To reject the call,
press the answer/end key twice.
When you receive a call, you hear
a ringing tone through the
speakerphone.
To end a call, press the answer/end
key. The speakerphone beeps.
To switch an active call from the
speakerphone to your device, press
and hold the answer/end key. To
switch the call back to the
speakerphone, press the answer/
end key.
Clear settings or reset
To clear the pairing settings from
the speakerphone, press and hold
the answer/end key and the
volume up key at the same time
for about 10 seconds. When the
settings are cleared, the red and
green indicator lights alternate.
To reset the speakerphone if it
stops functioning even though it is
charged, press and hold the
answer/end key, and plug the
speakerphone into a charger. To
use the speakerphone, reconnect it
to your mobile device.
© 2008 Nokia. All rights reserved.
11