Delayed Start Programming - Haier DW9-CBE7 Instructions For Use Manual

Delayed start programming

You can delay the start of a programme in increments of 1 hour up to 24 hours.
Switch dishwasher
Immediately press the Delayed Start button " G ", the delayed start indicator lights, the delayed start
time indicator "
Press the Delayed Start button "
the required delay.
To cancel the time delay setting, pressing the Delayed Start button until the delayed start indicator
goes out.
Press programme button " B " to choose the desired programme.
Close the door, the delayed start indicator "
decrease, the programme will start until the delayed start indicator "
1/2 Load Button
This button "H" (see" Close-up View (Control Panel) ) makes it possible to wash dishes using only the
upper rack if there are not enough dishes for a full load. This will allow you to save on water and energy
consumption.
To select 1/2 load:
Select the programme ( see the paragraph entitled" Switching the dishwaher ON")
Press the 1/2 load button "
If the door is closed, the programme starts automatically.
To cancel the 1/2 load, press programme button
- Please keep in mind that the amount of detergent should also be adapted to the 1/2 load.
23
ON.
F " changes to " ".
G " as many times as necessary until the numerical display shows
A B
H " , 1/2 load indicator lights.
G " blinks , the time-remaining indicator "
G
F G
" B " and hold it in for about 3 seconds.
en
F " will blink and
" goes out .
I
H