KitchenAid KUDC10FXSS Installation Instructions Manual page 21
Installation guide
Hide thumbs
Also See for KUDC10FXSS:
- User manual (40 pages) ,
- Energy manual (2 pages) ,
- Specifications (2 pages)
Table of Contents
Advertisement
Available languages
Available languages
WARNING
Electrical Shock Hazard
Electrically ground dishwasher.
Connect ground wire to green ground connector
in terminal box.
Do not use an extension cord.
Failure to follow these instructions can result in
death, fire, or electrical shock.
2
Direct Wire—Connect
ground wire
Ground
Ground
wire
wire
Washer
Ground
connector
Form bare ground wire into a U-shaped hook. Wrap
ground wire hook clockwise around ground connector
screw and under the washer. Securely tighten ground
connector.
3
Direct Wire—Connect
remaining wires
NOTE: Twist on UL Listed/CSA Approved wire connector.
Gently tug on wires to be sure both are secured.
Connect wires black to black and white to white, using
UL Listed/CSA Approved twist-on wire connectors (not
included).
Wiring configuration
Power supply wire:
Terminal box wire:
white
white
black
black
ground wire
ground connector
If needed, see website for animated representation
of this step. Visit www.kitchenaid.com/electrical under
FAQ tab.
4
Direct Wire—Secure cable
in strain relief
Tighten strain relief screws to secure cable.
5
Direct Wire—Reinstall
terminal box cover
Place wires inside terminal box. Insert tabs on left side
of cover. Make sure wires are tucked inside box. Close
cover ensuring wires are not pinched. Use ¹⁄₄" nut driver
and previously removed screw to secure cover.
Page 21
Hide quick links:
Advertisement
Chapters
Table of Contents
