Product Dimensions; Cutout Dimensions - Kenmore 1317 - Pro 24 in. Dishwasher Installation Instructions Manual

Product dimensions
3/4" (1.9 cm)
insulation -
may be
compressed
(not used on all
models)
,,_:-_24-1/2" (62.2 cm)*_
_(-_ 21" (53.3 ore) _D, t
SIDE VIEW
23-7/8" (60.6 cm)
m m
REAR VIEW
Cutout dimensions
All surfaces must be free
from intrusions
7-1/2" 7-1/2"
r(15.2 cm)
(5.1 cm) 10"
3-1/4"
(7 cm) (8.9 cm) (8.3 cm) (7 cm)
Cut holes in shaded area of cabinet walls or floor as specified below:
water line- 1/2" (1.3 cm)
drain line- 1-1/2" (3.8 cm)
direct wire - 3/4" (1.9 cm)
power supply cord- 1-1/2" (3.8 cm)
r' Measured from the lowest point on the underside of countertop. May be
reduced to 33-7/8" (86 cm) by removing wheels from dishwasher.
_ Minimum, measured from narrowest point of opening.
r'_ May be increased to 6-5/8" (16.6 cm) if height of opening is 34-1/2"
(876 cm) at its lowest point.
34"
(86.4 cm)
rnin. _