Connecting and Using a Source Device
Connecting the network box
Connect the DP-HDMI cable to the [HDMI] port on the product and the [MAGICINFO] port on the
For details on how to connect to a network box, refer to the user's manual provided with the network
box upon purchase.
To use MagicInfo, a network box (sold separately) must be connected to the product.
To change the MagicInfo settings, run "MagicinfoSetupWizard" on the desktop.
For details on how to use MagicInfo, refer to the DVD provided with the network box.
The information in this section is subject to change without notice for quality improvement.
If a problem occurs after installing an operating system other than the one provided with the
network box, restoring the previous version of the operating system, or installing software that is
not compatible with the operating system provided, you will not be able to benefit from technical
support and will be charged a fee for a visit from a service technician. A product exchange or
refund will also not be available.
Entering MagicInfo mode
After installing and connecting the network box (sold separately) to the product, power on the
Connecting the network box to the HDMI port on the product will change
on the remote control, and select MagicInfo.
2 Connecting and Using a Source Device