9
System
Problem
The Anynet+ device does not
play.
The connected device is not
displayed.
9.15 DivX® Video On Demand
m
MENU
[
Shows the registration code authorized for the product. If you connect to the DivX web site and register
using that code, you can download the VOD registration file.
For more information about DivX® VOD, visit "http://vod.divx.com".
You cannot use the play function when
is in progress.
Check whether or not the device supports Anynet+ functions.
Check whether or not the HDMI cable is properly connected.
Check whether
setup menu.
Search Anynet+ devices again.
Anynet+ requires an HDMI connection. Make sure the device is
connected to your product with an HDMI cable.
Some HDMI cables may not support Anynet+ functions.
If the connection is terminated because there has been a power
failure or the HDMI cable has been disconnected, please repeat
the device scan.
]
System
DivX® Video On Demand
Possible Solution
Plug & Play
Anynet+ (HDMI-CEC)
is set to
[
]
ENTER
(initial setup)
On
in the Anynet+
177
9 System