Samsung ME55A User Manual page 176

9
System
Troubleshooting for Anynet+
Problem
Anynet+ does not work.
I want to start Anynet+.
I want to exit Anynet+.
The message "Connecting to
Anynet+ device..." appears on
the screen.
Possible Solution
Check if the device is an Anynet+ device. The Anynet+ system
supports Anynet+ devices only.
You can connect only one receiver (home theater).
Check if the Anynet+ device power cord is properly connected.
Check the Anynet+ device's Video/Audio/HDMI cable
connections.
Check whether Anynet+ (HDMI-CEC)
setup menu.
Check whether the remote control is Anynet+ compatible.
Anynet+ doesn't work in certain situations. (Searching channels,
operating Plug & Play (initial setup), etc.)
If you have removed and then reconnected the HDMI cable,
please make sure to search devices again or turn your product off
and on again.
Check if the Anynet+ function of the Anynet device is set on.
Check if the Anynet+ device is properly connected to the product
and check if the Anynet+ (HDMI-CEC)
Anynet+ Setup menu.
Press the TOOLS button to display the Anynet+ menu and select
a menu you want.
Select View TV in the Anynet+ menu.
Press the SOURCE button on the product remote control and
select a non- Anynet+ device.
You cannot use the remote control when you are configuring
Anynet+ or switching to a view mode.
Use the remote control after the product has completed Anynet+
configuration or has finished switching to Anynet+.
is set to On in the Anynet+
is set to On in the
176
9 System