Speaker Select (External
If you are listening to the sound track of a broadcast or movie through an external receiver, you may
hear a sound echo caused by the difference in decoding speed between the TV's speakers and the
speakers attached to your audio receiver. If this occurs, set the TV to External.
Auto Volume (Off
equalizes the volume level on each channel, so that when you change channels, the volume
level is the same.
equalizes and decrease the volume level on each channel, so each channel is quieter.
useful at night, when you may want to keep the volume low.
To use the volume control of a connected source device, set
volume control of the connected source device may not be applied if
Reset all sound settings to the factory defaults. Select
up, and then press [
When you set
sound through the external speakers only. Sound will be audible only from the external
speakers if external speakers are connected when
When you set
If there is no video signal, both the TV's speakers and the external speakers will be mute.
to External, the TV's speakers are turned off. You will hear
both the TV's speakers and the external speakers
Sound, press [
is set to Internal.
to Off. A change to the
is set to
in the pop-
6 Sound Adjustment