Table of Contents
Advertisement
Log Files
With each recording of a particular clip on a disk, the DR-HD100
creates a text log file to identify information about the recorded clip
and the recording session. Information includes:
•
Clip name
•
Clip in/out source TC values
•
Clip duration
•
Clip type (record file type).
The log file also identifies when the shock cache becomes low and
when disk or other errors occur during a recording.
Error Messages
Error messages may appear on the DR-HD100 LCD display from
time to time. The purpose of these messages is to alert you to action
that may effect your DR-HD100 operation. Below is a list of error
messages and actions you can take:
Error Message
LOW BATTERY!
HIGH
TEMPERATURE!
NO SPACE LEFT!
DISK ERROR
XXX
NO DISK
DETECTED
WRONG
PRODUCT ID
FILE NOT FOUND
TRK LIMIT MAX!
ProHD DR-HD100 Portable DTE Recorder
Description
Battery power is low.
The unit is getting too hot
for normal operation.
The Disk Drive is Full.
Lost Disk Communication.
Lost Disk Communication.
Incorrect Software Loaded.
Wrong filename or missing
file.
999 clips exist on system.
Technical Specifications
Action
Connect AC Power or replace the bat-
tery pack. When the unit is run without
the battery installed, this warning can
be displayed, that is normal.
Make sure the vent and fan intake
holes are clear.
Transfer files off the drive and format it
before attempting to do more record-
ing.
Contact Focus Enhancements Techni-
cal Support.
Contact Focus Enhancements Techni-
cal Support.
Download correct software and per-
form upgrade again.
Check filename or that upgrade file
exists.
Copy content from DR-HD100 hard
drive and re-format.
105
Advertisement
Table of Contents
