2. Locate the connector for the power cord. Refer to "Rear view".
3. Disconnect the failing power cord and adapter from the computer and connect
the new power cord and adapter to the same connector.
4. Refer to the "Completing the installation".
Replacing the remote control
Note: Remove the batteries from the failing remote control before you return
it to Lenovo for a replacement.
Completing the installation
After replacing the parts, you need to install the computer cover and reconnect
31036449_A6_HRG_EN.indd 25
Hardware Replacement Guide
2009.1.12 3:50:38 PM
25