Download  Print this page

Windows Media Center Setup Wizard - HP 300-1020 - TouchSmart - Desktop PC Getting Started Manual

Touchsmart series.
Hide thumbs

Advertisement

2
For S-Video, connect the left and right audio cables from your set-top box to the left (white) and right
(red) Audio Line In connectors (B) on the back of the computer.
Setting up for remote control use (optional)
You must connect an IR emitter (blaster) cable to the computer and your set-top box to use the remote
control properly.
The IR emitter cable is a remote control sensing device that connects to the computer and covers the remote
sensor on a set-top box. When you are selecting TV channels in Windows Media Center, it enables the
remote control to work with your set-top box.
1
Connect the IR emitter cable (A) to the IR Out connector (D) on the back of the computer.
2
Remove the paper from the backing tape on the end of the cable (B), and then press the end of the
cable over the remote IR sensor (receiver) window on the set-top box (C). To locate the remote infrared
sensor window, shine a flashlight through the plastic on the front of the set-top box.
3
When you use the remote control, point it at the front of the HP TouchSmart PC (E), not at the
set-top box.

Windows Media Center setup wizard

Select models only
1
Tap the Start button, tap All Programs, and then tap Windows Media Center.
2
Follow the onscreen instructions to set up your TV tuner and Windows Media Center TV program guide.
For more information about setting up and using Windows Media Center, go to: www.microsoft.com,
or tap the Start button, tap Windows Media Center, tap Tasks, and then tap learn more.
18
User Guide (Features may vary by model)
A
D
B
C
E

Advertisement

Chapters

Table of Contents

   Related Manuals for HP 300-1020 - TouchSmart - Desktop PC

   Related Content for HP 300-1020 - TouchSmart - Desktop PC

This manual is also suitable for:

Touchsmart 300-1000 - desktop pc

Comments to this Manuals

Symbols: 0
Latest comments: