Download  Print this page

Synchronizing The Wireless Keyboard Or Mouse - HP 300-1020 - TouchSmart - Desktop PC Getting Started Manual

Touchsmart series.
Hide thumbs

Advertisement

The keyboard is designed to fit under your computer when not in use. Your product may vary from the one
shown here.
IMPORTANT: For better mouse battery life and performance, avoid using your mouse on a dark or high-
gloss surface, and turn mouse off when not in use.

Synchronizing the wireless keyboard or mouse

The wireless keyboard and mouse are pre-synchronized, for your convenience, to work with your
HP TouchSmart PC. The keyboard and mouse should work immediately after you pull the battery tabs to
activate the preinstalled batteries, and then turn on the mouse (A).
You may need to manually synchronize the wireless keyboard or mouse if they are not functioning.
To synchronize them:
Make sure the keyboard and mouse are next to the HP TouchSmart PC, within 30 cm (1 foot) and
away from interference from other devices.
Keyboard: Press the Connect button on the bottom of the keyboard (B) for five seconds. The blue
activity LED on the wireless receiver illuminates when the synchronization command has been received
and turns off when synchronization is complete.
Mouse: Press the Connect button on the bottom of the mouse (C) for five seconds. The blue activity
LED on the wireless receiver illuminates when the synchronization command has been received and
turns off when synchronization is complete.
B
If this does not work, remove and then re-insert the wireless keyboard and mouse receiver from the back of
the computer and then synchronize the keyboard and mouse again.
A C
Welcome
11

Advertisement

Chapters

Table of Contents

   Related Manuals for HP 300-1020 - TouchSmart - Desktop PC

   Related Content for HP 300-1020 - TouchSmart - Desktop PC

This manual is also suitable for:

Touchsmart 300-1000 - desktop pc

Comments to this Manuals

Symbols: 0
Latest comments: