Download
Share
Print this page
Dell AW2724DFB Service Manual
  1. Manuals
  2. Brands
  3. Dell Manuals
  4. Monitor
  5. AW2724DFB
  6. Service manual
Dell AW2724DFB Service Manual

Dell AW2724DFB Service Manual

Hide thumbs

Quick Links

Download this manual
Service Manual–AW2724DFB
Version: 01
Date:2023/03/06
- 1 -
loading
Need help?

Need help?

Do you have a question about the AW2724DFB and is the answer not in the manual?

Questions and answers

Related Manuals for Dell AW2724DFB

Summary of Contents for Dell AW2724DFB

  • Page 1 Service Manual–AW2724DFB Version: 01 Date:2023/03/06 - 1 -...
  • Page 2 Content Index 1. General Safety Instructions ..................3  1.1 SAFETY: General Safety ..................3  1.2 SAFETY: General Power Safety ................5  2. Exploded view diagram with list of items ..............6  3. Wiring connectivity diagram ..................8  4. How to connect and disconnect power cable/ connectivity cable ......9  5.
  • Page 3 IMPORTANT NOTICE FOR USE IN HEALTHCARE ENVIRONMENTS: Dell products are not medical devices and are not listed under UL or IEC 60601 (or equivalent). As a result, they must not be used within 6 feet of a patient or in a manner that directly or indirectly contacts a patient 1.1 SAFETY: General Safety...
  • Page 4 When operating your equipment:  Do not use your equipment in a wet environment, for example, near a bath tub, sink, or swimming pool or in a wet basement.  Do not use AC powered equipment during an electrical storm. Battery powered devices may be used if all cables have been disconnected.
  • Page 5 If your equipment uses an AC adapter:  Use only the Dell provided AC adapter approved for use with this device. Use of another AC adapter may cause a fire or explosion. NOTE: Refer to your system rating label for information on the proper adapter model ...
  • Page 6 2. Exploded view diagram with list of items Item Description Q'ty Remark ASSY BKT CHIN Panel ASSY MF BTN POWER PCBA LENS BD HOLDER L PCBA KEY BD PCBA USB BD For EMEA Only, not for other regions PCBA I/F BD PCBA LED DRV BD PCBA USB B BD PCBA SPS BD...
  • Page 7 NOTE: For replacement of power cord, connectivity cable and external power supply (if applicable), contact Dell: 1. Go to https://www.dell.com/support. 2. Verify your country or region in the Choose A Country/Region drop-down menu at the bottom-right corner of the page.
  • Page 8 3. Wiring connectivity diagram Wire1 Wire 2 Wire3 Wire 4 FFC 1 FFC 2 FFC 3 - 8 -...
  • Page 9 4. How to connect and disconnect power cable/ connectivity cable WARNING: To change power cable/ connectivity cable, switch off power before unplugging the cable and replugging in required cable. Connect/ disconnecting the DisplayPort (DP to DP) and USB cables Connect/ disconnecting the DisplayPort (USB-C to DP) and USB cables - 9 -...
  • Page 10 Connect/ disconnecting the HDMI and USB cables (optional) Connect/ disconnecting the power cables of your computer and monitor into a wall outlet - 10 -...
  • Page 11 5. Disassembly and Assembly Procedures NOTE: This “Disassembly and Assembly Procedures” is for EMEA only, not for other regions. Please note that Dell will deem warranty void if any disassembly is done on the monitors. 5.1 Disassembly SOP Preparation before disassembly 1.
  • Page 12 Item Picture Operation Tool Notes 1. Unplug “FFC USB3 30/30” from USB BD 1. Tear off a tape from “LENS BD FFC” and KEY BD to I/F BD FFC (FFC 4P P1 545MM JOYSTICK) “KEY BD to I/F BD FFC” on Panel LENS BD FFC 2.
  • Page 13 Item Picture Operation Tool Notes 2. Tear off a conductive cloth from “FFC EDP 51P/51P” on panel 3. Tear off a yellow tape from “FFC EDP 51P/51P” on panel 4. Unplug “FFC EDP 51P/51P” from panel 5. Take off “Main SHD” from Panel 1.
  • Page 14 Item Picture Operation Tool Notes 5. Disassemble “USB B Philips-head Do not touch BD” from Main SHD screwdriver component and unplug “USB B without BD to I/F BD wire” (Screw wearing from “USB B BD” Torque: insulating 8.5±1 Kgf) gloves 6.
  • Page 15 Item Picture Operation Tool Notes 10. Disassemble SPS BD Do not touch from Main SHD and component unplug “WIRE without AC+3P” from SPS wearing insulating gloves when disassembli assembling 11. Unlock 1 ground Power BD screw and disassemble “WIRE AC+3P” from Main AC Socket (WIRE AC+3P) - 15 -...
  • Page 16 5.2 Assembly SOP Preparation before assembly 1. Clean the room for work 2. Identify the area for material 3. Prepare the implement, equipment, materials as bellow： 1) Working table 2) Philips-head screwdriver 3) Gloves 4) Cleaning cloth 5) ESD protection Item Picture Operation...
  • Page 17 Item Picture Operation Tool Notes 5. Insert “SPS BD Wire” Philips- to I/F BD and head assemble I/F BD to screwdriver Main SHD (Screw 6. Insert “LED DRV BD Torque: to I/F BD Wire” to 8.5±1 Kgf) “LED DRV BD” and assemble “LED DRV BD”...
  • Page 18 Item Picture Operation Tool Notes 1. Insert “FFC EDP 51P/51P” to panel 2. Paste a yellow tape to fix “FFC EDP 51P/51P” on panel 3. Paste a conductive cloth to cover the yellow tape 1. Place Main SHD on Philips- Panel and lock 2 head screws to fix it on...
  • Page 19 Item Picture Operation Tool Notes 1. Tear off the release paper from “LENS BD FFC” and stick "LENS BD FFC" on Panel 2. Tear off the release paper from “KEY BD to I/F BD FFC” and stick “KEY BD to I/F BD FFC”...
  • Page 20 Item Picture Operation Tool Notes To assemble stand: 1. Align and place the stand riser on the stand base. 2. Open the screw handle at the bottom of the stand base and turn it clockwise to secure the stand assembly. Close the screw handle.
  • Page 21 6. Trouble shooting instructions - 21 -...
  • Page 22 - 22 -...
  • Page 23 - 23 -...
  • Page 24 - 24 -...
  • Page 25 - 25 -...
  • Page 26 - 26 -...
  • Page 27 - 27 -...
  • Page 28 - 28 -...