Craftsman 65006 Assembly Instructions Manual page 15

Shed Assembly —Walls/Continued
Before proceeding,
corner is square (top view) where it
meets the floor and that panel is flush
(side view) with floor.
If not, repeat Steps 11—13
until square and flush.
Vue de dessus
make sure
Vue latérale
x4
Repeat Steps 11-14 for rear corner (G).
Secure rear corner panel (G) with four easy bolts (T),
working from floor to roof. DO NOT use torque wrench.
Use easy bolt easy driver (U) and hand tighten. Easy
bolt head will be flush when fully seated. DO NOT over
tighten easy bolts. Note: You may hear a click when
easy bolt has been tightened completely.
15