Craftsman 65006 Assembly Instructions Manual page 13

ROOF PRE-ASSEMBLY
SHED ASSEMBLY - WALLS
Place skylight gasket (M) into skylight (L). Place skylight
(L) onto right roof panel (Y). Secure from underside with
eight screws (X). Make sure rib on plastic parts is seated
fully against gasket on skylight. Repeat for remaining
roof panel.
Critical:
flex corner hinges back and forth
several times. This will help provide
a square corner and ensure proper
fit of remaining panels.
Important:
position, as this can crack the panel.
13
When installing corners,
DO NOT flex in reverse