Using The Menus; Setup Using The Setting Display; The Image Adjustment Menu - Toshiba TLP-X150 Owner's Manual

Using the menus

You can call up on-screen menus, and conduct a number of adjustments and settings using
the MENU button p.16 on the control panel (main unit side) and remote control.

Setup using the Setting display


The menu shown below is for operation instructions purposes and might differ from the
actual display.
1. Press the MENU button
This will display the Setting display menu.
2. Select a Category
Select a category by using .
There are 6 categories:
Image adjustment menu p.35
Display setting menu p.37
Default setting 1 menu p.40
Default setting 2 menu p.41
Slideshow setup menu p.43
Status display menu p.45
3. Adjustments & Settings
Press
Item
Adjustment/Setting Value
These marks signify
the items can be
adjusted/set by using
.
These marks signify the items can
be selected from the list by using
.
After an item is selected, apply it by
pressing .
• The figure shows displays given for operation instructions purposes. As the display may differ depending on the item,
refer to the following applicable pages for the menu item you desire.
• To return to previous item, press the RETURN button.
4. End Press the MENU button once more.
(The menu will disappear automatically after 30 seconds, if no operation is conducted.)
Displays the current
adjustments and
settings of the selected
category.
Items shown in gray
cannot be adjusted with
the current input source.
or to open the menu.
These marks
These marks signify
signify that there
that there are setting
are options.
screens. Press
Press or
to display a list of
to display a list of
options. setting screens.
* When no item is
changed, press
Toggle items with .
Select items with and press .
Fix selection with .
4

The image adjustment menu


Use this menu to set or adjust image-related items. Items that can be set or adjusted
are marked "Yes", and those that cannot are marked "No". (When an item is masked, it
indicates that you cannot select it using the current input.)
Item
Adjust the image contrast.
Contrast
Brightness Adjust the brightness of the image.
Darker
Adjust the color of the image.
Color
Lighter
Sharpness Adjust the sharpness of the image.
Noise Set the function to reduce screen noise.
*1
reduction
On (Enable)
Press
NCE
See
Adjust red of the image color.
R-level
Less red
Adjust green of the image color.
G-level
Less green
Adjust blue of the image color.
B-level
Less blue
Set the black level with
NTSC
US
*2
mode
JAPAN : NTSC (JAPAN) mode
Automatically adjusts items such as
Auto
the sampling phase depending on the
setting
or
type of input signal.
Press
Position
and adjust with
Phase
.
Adjust to eliminate flicker.
Frequency
Adjust to eliminate periodic patterns
and flickering when many fine vertical
lines appear on the screen.
Adjust the horizontal position of the
image.
Description Computer Y/P
Yes
Lower Higher
Yes
Brighter
No
Deeper
Yes
Softer Sharper
No
Off (Disable)
. Toggle the NCE mode with
Yes
. Switches the picture mode.
p.31 for details.
Yes
More red
Yes
More green
Yes
More blue
.
: NTSC (US) mode No
Yes
then change mode using
Yes
Yes
Yes
H-position
Yes
5
USB
/P Video S-video
B R
memory
Yes Yes Yes Yes
Yes Yes Yes Yes
Yes Yes Yes No
Yes Yes Yes Yes
Yes Yes Yes No
Yes Yes Yes Yes
Yes Yes Yes Yes
Yes Yes Yes Yes
Yes Yes Yes Yes
No Yes Yes No
No No No No
No No No No
No No No No
No No No No
No No No No