Brother HL-5440D User Manual page 67

Driver and Software
Improve Print Output

This feature allows you to improve a print quality problem.
• Reduce Paper Curl
If you choose this setting, the paper curl may be reduced.
If you are printing only a few pages, you do not need to choose this setting. We recommend that you
change the printer driver setting in Media Type to a thin setting.
Note
This operation will decrease the temperature of the machine's fusing process.
• Improve Toner Fixing
If you choose this setting, the toner fixing capabilities may be improved. If this selection does not
provide enough improvement, change the printer driver setting in Media Type to a thick setting.
Note
This operation will increase the temperature of the machine's fusing process.
• Reduce Ghosting
If you are using the machine in a high humidity environment this setting may reduce ghosting on the
paper. Do not use this setting if the ambient humidity is below 30% or ghosting may increase.
Note
This feature may not reduce ghosting for all types of paper. Before you buy a lot of paper, test a small
quantity to make sure that the paper is suitable.
 Density Adjustment
Increase or decrease the print density.
 Sleep Time
When the machine does not receive data for a certain period of time, it enters sleep mode. In sleep mode,
the machine acts as though it were turned off. When you choose Printer Default, the timeout setting will
be reset to the specific time set at the factory; this can be altered in the driver. If you want to change the
Sleep Time, choose Manual and then enter the time in the text box on the driver.
While the machine is in Sleep Mode, the Ready LED is dimmed, but the machine can still receive data.
Receiving a print job will automatically wake up the machine to start printing.
 Other Print Options
• Skip Blank Page
If Skip Blank Page is checked, the printer driver automatically detects blank pages and excludes them
from printing.
2
61