Web Based Management; Factory Default; Print Printer Settings Page; For Network Users - Brother HL-4570CDW Quick Setup Manual

For Network Users

Web Based Management

(web browser)
The Brother print server is equipped with a web server
that allows you to monitor its status or change some
of its configuration settings, using HTTP (Hyper Text
Transfer Protocol).
Note
• The login name for the Administrator is 'admin'
(case sensitive) and the default password is
'access'.
• We recommend Microsoft
®
Explorer 6.0 (or greater) or Firefox 3.0 (or
®
greater) for Windows
greater) for Macintosh. Please also make sure
that JavaScript and Cookies are always
enabled in whichever browser you use. To use
a web browser, you will need to know the IP
Address of the print server. The IP Address of
the print server is listed on the Print Setting
Page.
a
Open your browser.
b
Type http://machine_ip_address/ into
your browser (where machine_ip_address
is the IP address or the print server name).
 For example: http://192.168.1.2/
See Web Based Management in the Network
User's Guide.
®
Internet
and Safari 3.0 (or
Reset the network settings to the

factory default

To reset all network settings of the print server to its
factory default, follow the steps below.
a
Press + or - to choose Network.
Press OK.
b
Press + or - to choose Network Reset.
Press OK.
c
Press + to choose Reset.
d
Press + to choose Yes for reboot.
The machine will re-start.
Print the Printer Settings Page
The Printer Settings Page lists all the current printer
settings, including network settings.
a
Press + or - to choose Machine Info..
Press OK.
b
Press OK to choose Print Settings.
Note
If the IP address on the Printer Settings Page
shows 0.0.0.0, wait for one minute and try again.
25