Printing Problems - Epson C11CA29201-O - Artisan 800 Color Inkjet Network Installation Manual

Artisan 800 series using the control panel for wireless network installation
Hide thumbs Also See for C11CA29201-O - Artisan 800 Color Inkjet:
Table of Contents

Advertisement

The printer does not appear in the Add Printer window (Mac OS X)
Make sure the printer driver was installed correctly and that your computer's
TCP/IP settings are configured correctly.

Printing Problems

Cannot print over the network
Print a Network Status Sheet (see page 25) and verify that the network
settings are correct.
When using TCP/IP, make sure the printer's IP address is set correctly for your
network. If your network does not assign IP addresses using DHCP, you will
need to set the IP address manually.
Print a Network Status Sheet (see page 25). If the Link Status says Disconnect,
make sure that the wireless router or access point is turned on and that the
settings are correct for your wireless network.
Reset the printer's network settings (see page 26) and perform a first-time
installation of the printer and software (see page 3).
Printing is slow or the print is cut off
Print a Network Status Sheet (see page 25) and check the Signal Condition. If it's
poor, try moving the printer closer to your wireless router or access point. Avoid
placing the printer next to a microwave oven, 2.4 GHz cordless phone, or large
metal object such as a filing cabinet.
A dial-up connection dialog box appears when printing with EpsonNet
Print
If you use a dial-up connection for Internet access, you will see this message every
time you print. Try connecting to the Internet using a LAN connection or set your
dial-up connection to dial manually (Never dial a connection).
Troubleshooting
23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Artisan 800 - all-in-one printerC11ca29201-o 800

Table of Contents