Integrated Peripherals - Gigabyte GA-78LMT-S2PT User Manual

2-6

Integrated Peripherals

CMOS Setup Utility-Copyright (C) 1984-2011 Award Software
OnChip SATA Controller
OnChip SATA Type
x OnChip SATA Port4/5 Type
x OnChip SATA Port as ESP
SMART LAN
`
Onboard LAN Function
Onboard LAN Boot ROM
Onboard Audio Function
USB Controllers
USB Legacy Function
USB Storage Function
Onboard Serial Port
Onboard Parallel Port
Parallel Port Mode
x ECP Mode Use DMA
: Move Enter: Select
F5: Previous Values
OnChip SATA Controller
&
Enables or disables the integrated SATA controller. (Default: Enabled)
OnChip SATA Type (SATA2 0~3 connectors)
&
Configures the operating mode of the integrated SATA2 0~3 controller.
Native IDE Allows the SATA controller to operate in Native IDE mode. (Default)

Enable Native IDE mode if you wish to install operating systems that support Native
mode.
RAID Enables RAID for the SATA controller.

AHCI Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface

(AHCI) is an interface specification that allows the storage driver to enable advanced
Serial ATA features such as Native Command Queuing and hot plug.
OnChip SATA Port4/5 Type (SATA2 4/5 connectors)
&
This option is configurable only when OnChip SATA Type is set to RAID or AHCI. Configures the operating
mode of the integrated SATA2 4/5 connectors.
IDE Disables RAID for the SATA controller and configures the SATA controller to PATA mode.

(Default)
As SATA Type The mode depends on the

OnChip SATA Port as ESP
CMOS Setup Utility-Copyright (C) 1984-2011 Award Software
Port0 as ESP
Port1 as ESP
Port2 as ESP
Port3 as ESP
x Port4 as ESP
x Port5 as ESP
: Move Enter: Select
F5: Previous Values
Port0 as ESP/Port1 as ESP/Port2 as ESP/Port3 as ESP
&
This option is configurable only when OnChip SATA Type is set to AHCI. Enabled will speed up the hot
plug detection of the connected SATA device. (Default: Disabled)
Integrated Peripherals
[Enabled]
[Native IDE]
IDE
Press Enter
[Press Enter]
[Enabled]
[Disabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[3F8/IRQ4]
[378/IRQ7]
[SPP]
3
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
OnChip SATA Type settings.
OnChip SATA Port as ESP
[Disabled]
[Disabled]
[Disabled]
[Disabled]
Disabled
Disabled
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
- 30 -
Item Help
Menu Level `
ESC: Exit F1: General Help
F7: Optimized Defaults
Item Help
Menu Level ``
ESC: Exit F1: General Help
F7: Optimized Defaults