Pairing - Nokia 6255i - Cell Phone - CDMA2000 1X User Manual

• Service discovery profile (SDP)
• Generic access profile (GAP)
• Serial port profile (SPP)
To ensure interoperability between
other devices supporting Bluetooth
technology, use Nokia approved
enhancements for this model. Check
with the manufacturers of other
devices to determine their
compatibility with this device.There
may be restrictions on using
Bluetooth technology in some
locations. Check with your local
authorities or service
provider.Features using Bluetooth
technology, or allowing such
features to run in the background
while using other features, increase
the demand on battery power and
reduces the battery life.

Pairing

You can set up a permanent
association (pairing) between your
phone and another device with
Bluetooth connectivity. Some
devices may require pairing before
data transfer can take place.
To pair with a device, you and the
owner of the other device must
agree on a passcode of 1–16
numeric characters. The first time
you try to connect the devices,
you must each enter the same
passcode. Once the devices are
Copyright © 2005 Nokia. All rights reserved.
C o n n e c t i v i t y ( M e n u 1 0 )
paired, you will not need to use the
passcode again, so there is no need
to remember it.
Paired devices are placed in your
paired device list. You can view the
list even when Bluetooth is not
active or when the devices in the list
are not available for connection.
To view the paired device list:
1. From the standby mode screen,
select Menu >
Bluetooth > Paired
2. Scroll to the desired device, and
select Options
following
Assign short name—Give a
nickname to the selected device
(visible to you only).
Request conn. authorization—
Select No if you want the phone
to connect to the selected device
automatically or
the phone to ask for your
permission first.
Delete pairing—Delete the
pairing to the selected device.
Pair new device—Search for
active devices with Bluetooth
connectivity within range, scroll
to the desired device, and select
Pair to establish pairing with that
device.
Connectivity >
devices.
and one of the
Yes if you want
83