Setting Up Your Microwave Oven; Checking The Parts; Warranty And Service Information; Oven - Samsung SMH1611B/XAA User Manual

setting up your
microwave oven
Be sure to follow these instructions closely so
that your new microwave oven works properly.

CHECKING THE PARTS

Carefully unpack your microwave oven, and make
sure you've received all the parts shown below. If your
microwave oven was damaged during shipping, or if you
do not have all the parts, contact Samsung Customer
Service. (Refer to the "Warranty and service information"
on page 8.)
Microwave oven (SMH1611)
Glass Tray Roller Guide
Grease Filters Charcoal filter
(2ea)
Registration
Card
Installation)
8_ setting up your new microwave oven
SMH1611_XAA_03898A_EN-01.indd 8
Exhaust adaptor
Ring
Hardware kit
(Screws &
Brackets)
Manuals Templates
(User & (Top & Wall)
WARRANTY AND SERVICE
INFORMATION
To help us to serve you better, please complete the
enclosed registration card and promptly return it by mail.
If the registration card is missing, you can call Samsung
Electronics, Inc., at 1-800-SAMSUNG (726-7864)
or register online at www.samsung.com/global/
register.
When contacting Samsung, please provide the specific
model and serial number information which is usually
located on the back or bottom of the product. Please
record these numbers in the spaces provided below,
along with the other requested information. Keep this
information in a safe place as a permanent record of
your purchase to aid in identification in case of theft or
loss. Also keep a copy of your sales receipt as a proof of
purchase if warranty service is needed.
MODEL NUMBER
SERIAL NUMBER
DATE PURCHASED
PURCHASED FROM
Warranty service can only be performed by a Samsung
Authorized Service Center. If you should require warranty
service, provide the above information with a copy of your
sales receipt to the Samsung Authorized Service Center.
For service assistance and the location of the nearest
service center, please call 1-800-SAMSUNG (726-7864).
SETTING UP YOUR MICROWAVE

OVEN

1. Open the door by pulling the handle on the right side
of the door.
2. Wipe the inside of the oven with a damp cloth.
3. Install the pre-assembled ring into the indentation at
the center of the microwave oven.
4. Place the glass tray securely in the center of the pre-
assembled roller ring.
2011-03-16 1:33:30