6
Check the save range and then click [Save].
The [Save As] dialog box appears.
7
Specify the save destination and then click the
[Save] button.
The merged images are saved.
8
Select the [PhotoStitch] menu
to quit.
PhotoStitch quits.
See also the Help that are displayed when you click [
right of the window for information on operating PhotoStitch and
PhotoStitch functions.
Save range
Drag [
] to change the range
[Quit PhotoStitch]
] on the
Adjusting RAW Images
You can make the same adjustments (reset processing conditions) to
RAW images as the functions that are available on the camera, such as
brightness and white balance adjustment. You can also convert edited
RAW images to JPEG or TIFF images and save them.
Because only the image processing conditions are changed when a
RAW image is adjusted, the original image data remains totally
unaffected. For this reason, image deterioration that usually
accompanies editing does not occur and you can readjust, redo or undo
changes knowing that you can always revert to the original shot
condition of the image.
1
Select a RAW image.
2
Select the [File] menu
RAW Image Task starts up and the main window appears.
3
Adjust the image in the [Image Quality Adjustment]
window.
RAW Image Task main window
The image is adjusted.
The adjustment items in the [Image Quality Adjustment] window
vary according to the model of camera used for shooting the
RAW image. For more details, refer to p.54.
[Processing RAW Images].
Image Quality
Adjustment
window
Introduction
Contents at
a Glance
1
Basic
Operation
2
Advanced
Operation
3
High-Level
Functions
4
Preferences
Reference
Index
51