Timed Cycles
Use Timed Cycles to select a specific amount of drying time
and a drying temperature. When a Timed Cycle is selected,
the Estimated Time Remaining display shows the actual time
remaining in your cycle.
Press the TEMP button to change the drying temperature from the
default setting.
Press the MORE TIME or LESS TIME button to
increase or decrease the drying time. Tap MORE
TIME or LESS TIME and the time will change by
1-minute intervals.
Press and holdMORE TIME
or LESS TIME and the time will change by
5-minute intervals.
More
Time
Less
Time
Timed Cycle Settings
Timed Cycles
Default
Default Cycle
Load Type
Temperature
Time*
(Minutes)
TIMED DRY
High
80
Heavyweight items,
bulky items, bedspreads,
work clothes
SMALL LOAD
Medium
27
2-3 items
TOUCH UP
Medium
20
Slightly damp items, and to
remove wrinkles
*Reset time to complete drying, if needed.
Air Dry
Use the Air Dry temperature setting with Timed Cycles for items
that require drying without heat such as rubber, plastic, and
heat-sensitive fabrics. This chart shows examples of items that
can be dried using Air Dry.
Type of Load
Est.
Time*
(Minutes)
Foam rubber - pillows, padded bras, stuffed toys
20 - 30
Plastic - shower curtains, tablecloths
20 - 30
Rubber-backed
rugs
40 - 50
Olefin, polypropylene,
sheer nylon
10 - 20
*Reset time to complete drying, if needed.
When using Air Dry
•
Check that coverings are securely stitched.
•
Shake and fluff pillows by hand periodically during the cycle.
•
Dry item completely. Foam rubber pillows are slow to dry.
NOTE: Automatic
Cycles are not available when using the Air Dry
setting.
Page 6