Canon RF 85mm F1.4 L VCM Instruction On Mounting And Use Manual page 8
Table of Contents
●
Set the camera's power switch to OFF when attaching or detaching the
lens.
●
Attach the lens cap before detaching the lens from the camera.
●
After detaching the lens, place the lens with the rear end up and attach
the dust cap to prevent the lens surface and contacts from getting
scratched. Make sure the lens and dust cap mount indexes are aligned
when attaching the dust cap.
●
Contacts that are scratched, soiled, or have fingerprints on them
may result in faulty connections or corrosion, which may lead to
malfunctions. If the contacts get soiled, clean them with a soft cloth.
●
The lens mount has a rubber ring to improve dust-resistance and water-
resistance performance. This rubber ring may cause friction marks to
appear around the camera's lens mount, although this will have no
effect on usage.
● Rubber rings can be replaced at Canon Service Center. (chargeable)
ENG-7
Table of Contents
Need help?
Do you have a question about the RF 85mm F1.4 L VCM and is the answer not in the manual?