Filters (Sold separately)
●
Only one filter with a thickness of 0.2 mm/0.008 in. or less may be
used.
●
When printing the template, make sure that the illustration size
remains the same. Check that the printed-out size is the same as the
measurements shown in the illustration.
●
Cut along the middle of the lines printed on the filter template. Any
deviation from the template line width can cause the following issues.
Note 1: If you cut inside the lines, light will come in around the edges of
the filter, preventing it from working fully. In particular, there can
be differences with exposure and color patches in the corners.
Note 2: I f you cut outside the lines, it may not fit in the rear filter holder,
or the filter corners could contact the camera, damaging the
camera or filter.
ENG-17
Need help?
Do you have a question about the RF 85mm F1.4 L VCM and is the answer not in the manual?