Rack Dry - Samsung DV203AES User Manual

RACK DRY

Installing the drying rack
1. Open the Dryer door.
2. Position the drying rack in the tumbler, placing the rear legs in the two recessed areas of the
dryer's back wall.
3. Place the front lip of the drying rack on top of the lint filter.
4. Place the items to be dried on the rack, leaving space between them so air can reach all
surfaces.
5. Close the Dryer door.
6. Use the Time Dry cycle. Select the time according to the moisture and weight of the items.
Start the Dryer. It may be necessary to reset the timer if a longer drying time is needed.
SUGGESTED ITEMS
Washable sweaters
(block to shape and lay flat on rack)
Stuffed toys
(cotton or polyester fiberfilled)
Stuffed toys
(foam or rubber-filled)
Foam rubber pillows
Sneakers
Drying foam rubber, plastic, or rubber on a heat setting may cause damage to the item and
lead to a fire hazard.
WARNING
SUGGESTED TEMP. SETTINGS
Low or Extra Low
Low or Extra Low
Air Fluff
Air Fluff
Air Fluff or Heat (Extra Low)
Operating Instructions, Tips _21