Advertisement
ROUTE
THE
VENT
Typical installations
exhaust
from the
rear of the laundry
center.
Avoid pushing
the laundry
center tightly
against
a wall. This can crush or kink the
vent. Use the straightest
path you can,
where possible.
Avoid 90 ° turns.
______
Rear exhaust installations for standard
offset connections
-_[see
pgs. 36-37)
Rear exhaust installations for offset
connections with close clearances -
(see p. 38)
34
This laundry
center may be converted
to exhaust
out the right or left side. To
convert the laundry
center, one of the
following kits MUST be used.
Side Exhaust Kit No. 3391335 (white)
Side Exhaust Kit No. 3391336 (almond)
Follow the instructions
in the kit to
avoid operational
and personal
hazards.
These kits are available
at your local
Sears store or Sears Service
Center.
Typical installations for left or right side
exhausting
NOTE: Avoid pushing
the laundry
center
tightly against
a wall. This can crush or
kink the vent. Use the straightest
path you
can, where possible,
to avoid 90 ° turns.
- Quick Links:
- Washer
Hide quick links:
Advertisement
