Download Print this page

Kenmore 8875 - 24 in. Laundry Center Owner's Manual And Installation Instructions page 17

24-inch wide laundry center washer-electric dryer

Advertisement

.::_J :" ?:,i
_'-.<_,; _L_,
,.> _:_;.:..,_ :;i: ,:_
-_.:t_. 7:.
B. INSTALL
LEVELING
LEGS
To install rear legs:
STEP 1. If you have not already done
so, lay the laundry center on its side.
Because of the weight of the laundry
center, two people should lay it down.
STEP 2. Push legs into holes in rear
corners until they snap into place.
STEP 3. Check adjustability of rear
legs, by pushing in one leg. The other
leg should come out. Check both legs.
If they do not adjust, repeat STEP 2.
To install front Ilegs:
STEP 1. Screw front legs into the holes
in the triangular
braces in front corners.
Screw them in with an adjustable wrench
to the diamond marks on the ridges.
STEP 2. Carefully stand the laundry
center upright. Because of the weight
of the laundry center, two people
should lift it.
C. REMOVE
STYROFOAM
PACKING
To prevent floor damage, set laundry
center onto carCboard before moving
across floor.
Move laundry center close to its final
location.
STEP 1. Open the washer lid. The latch
under the dryer will keep the lid open.
Read, then remove the yellow card on
the agitator.
Yellow card
STEP 2. Pull the styrofoam
packing out
of the washer.
17

Hide quick links:

Advertisement

loading