Ricoh Aficio SP 5210DN Hardware Manual page 60

3. Installing Options
8. Fasten the controller board to the printer with the two screws.
3
• After finishing the installation, you can check the SDRAM module is properly installed: Print the
configuration page from the [List/Test Print] menu. If it is installed properly, the memory capacity will
appear under "Total Memory" on the configuration page.
• The table below shows the total SDRAM module capacities.
256 MB
256 MB
• If the SDRAM module is not properly installed, repeat this procedure. If you cannot install it properly
even after reinstallation, contact your sales or service representative.
• Install the controller board carefully to prevent any malfunction.
• For details on printing the configuration page, see p.44 "Test Printing".
58
Standard
256 MB
512 MB
CEC072
Extended Total
512 MB
768 MB