Ricoh Aficio SP 5210DN Hardware Manual page 37

• When you use this printer for a long time in a confined space without good ventilation, you may detect
an odd smell. To keep the workplace comfortable, we recommend you keep it well ventilated.
Ventilation
When you use this machine in a confined space without good ventilation for a long time or print large
quantities, you might detect an odd smell.
This might cause the output paper to also have an odd smell.
When you detect an odd smell, regularly ventilate in order to keep the workplace comfortable.
• Set up the machine so that it does not directly ventilate towards people.
• Ventilation should be more than 30 m
New machine smell
When a machine is new, it might have a unique smell. This smell will subside in about one week.
When you detect an odd smell, sufficiently ventilate and circulate the air in the room.
Environments to Avoid
Do not use the printer in the following environments:
• Areas exposed to direct sunlight or strong light
• Dusty areas
• Areas with corrosive gases
• Areas that are excessively cold, hot, or humid
• Areas directly exposed to currents of hot, cold, or room-temperature air from air conditioners
• Areas directly exposed to radiant heat from heaters
• Locations near air conditioners, heaters, or humidifiers
• Locations near other electronic equipment
• Locations subject to frequent strong vibration
Power Source
Connect the power cord to a power source of the following specification:
(mainly Europe and Asia)
220 - 240 V, 50/ 60 Hz, 6 A or more
(mainly North America)
120 - 127 V, 60 Hz, 11 A or more
3
/hr/person.
Place to Install
2
35