HP 1022 - LaserJet B/W Laser Printer User Manual

Hp laserjet 1022, 1022n, 1022nw - user guide.
Hide thumbs
HP LaserJet 1022, 1022n, 1022nw
User Guide

Advertising

   Also See for HP 1022 - LaserJet B/W Laser Printer

   Related Manuals for HP 1022 - LaserJet B/W Laser Printer

   Summary of Contents for HP 1022 - LaserJet B/W Laser Printer

  • Page 1

    HP LaserJet 1022, 1022n, 1022nw User Guide...

  • Page 3

    HP LaserJet 1022, 1022n, and 1022nw printers User Guide...

  • Page 4

    HP shall not be liable Part number: Q5912-90949 for technical or editorial errors or omissions Bluetooth® is a trademark owned by its contained herein. proprietor and used by Hewlett-Packard Edition 3, 04/2009 Company under license. UNIX® is a registered trademark of The Open Group.

  • Page 5: Table Of Contents

    Table of contents 1 Printer basics Quick access to more information .....................2 Web links for drivers, software, and support ..............2 User guide links ........................2 Where to look for more information ..................2 Printer configurations ........................3 HP LaserJet 1022 printer ....................3 HP LaserJet 1022n printer ....................3 HP LaserJet 1022nw printer ....................3 Walkaround ..........................4 Printer control panel ........................

  • Page 6: Table Of Contents

    Information tab ........................21 Settings tab ........................22 Networking tab ........................22 Other links .........................22 4 Printing tasks Manual feed ..........................24 To print using manual feed ....................24 Canceling a print job .......................25 Understanding print quality settings ..................2 6 Optimizing print quality for media types ..................27 Guidelines for using media .....................28 Paper ..........................28 Labels ..........................29...

  • Page 7: Table Of Contents

    Status light patterns ........................66 Paper handling problems ......................68 Media jam .........................68 Print is skewed (crooked) ....................68 More than one sheet of media feeds through the printer at one time ......68 Printer does not pull media from the media input tray ............68 Printer curled the media ....................69 Print job is extremely slow ....................69 Printed page is different than what appeared on screen ............70...

  • Page 8: Table Of Contents

    Material restrictions ......................96 For more information ......................96 Material safety data sheet ....................... 9 8 Appendix C Warranty and licensing Hewlett-Packard limited warranty statement ................99 Hewlett-Packard software license agreement ..............101 Print cartridge limited warranty .....................102 Appendix D HP parts and accessories Ordering supplies ........................

  • Page 9: Printer Basics

    Printer basics This chapter provides information on the following topics: ● Quick access to more information ● Printer configurations ● Walkaround ● Printer control panel ● Media paths ● Printer software ● Printer media considerations ENWW...

  • Page 10: Quick Access To More Information, Web Links For Drivers, Software, And Support

    Quick access to more information The following sections provide resources for additional information about the HP LaserJet 1020 series printer. The HP LaserJet 1020 series printer includes the HP LaserJet 1022, 1022n, and 1022nw NOTE printer models. Web links for drivers, software, and support If you need to contact HP for service or support, use one of the following links.

  • Page 11: Hp Laserjet 1022 Printer, Hp Laserjet 1022n Printer, Hp Laserjet 1022nw Printer

    Printer configurations Below are the standard configurations for the HP LaserJet 1022, 1022n, and 1022nw printers. HP LaserJet 1022 printer ● 18 pages per minute (ppm) A4 media and 19 ppm for letter media ● First page out in as few as 8 seconds ●...

  • Page 12: Walkaround, Priority Feed Slot ................................................................................................................ 3

    Walkaround The following illustrations identify the components of the HP LaserJet 1022, 1022n, and 1022nw printers. Output bin Input tray cover 250-sheet main input tray Priority feed slot Output media support Print cartridge door button ANCEL button Go light 10 Ready light 11 Attention light 12 Wireless light (HP LaserJet 1022nw printer only) Internal network port (HP LaserJet 1022n and HP LaserJet 1022nw printers only)

  • Page 13: Printer Control Panel

    Printer control panel The printer control panel is composed of three lights and two buttons. The HP LaserJet 1022nw printer has an additional light at the top of the control panel. These lights produce patterns that identify your printer's status. button: To cancel the print job that is currently printing, press the button.

  • Page 14: Media Paths, Priority Feed Slot, Main Input Tray

    Media paths The following sections describe the input trays and output bin. Priority feed slot You should use the priority feed slot when feeding one sheet of paper, envelope, postcard, label, or transparency. You can also use the priority feed slot to print the first page on different media than the rest of the document.

  • Page 15: Output Bin

    Output bin The output bin is located on the top of the printer. Printed media is collected here in the correct sequence. The output media support provides improved stacking for large print jobs. ENWW Media paths...

  • Page 16: Printer Software, Printer Software For Windows Computers

    Printer software The following sections describe the supported operating systems and the software that are provided with the HP LaserJet 1022, 1022n, and 1022nw printers. Not all software is available in all languages. NOTE Supported operating systems The printer comes with software for the following operating systems: ●...

  • Page 17: Printer Properties Online Help

    Printer properties (driver) Printer properties control the printer. You can change the default settings, such as media size and type, printing multiple pages on a single sheet of media (N-up printing), resolution, and watermarks. You can access the printer properties in the following ways: ●...

  • Page 18: Print Setting Priorities, Printer Software For Macintosh Computers

    To access the printer properties online help 1. From the software application, click File, and then click Print. 2. Click Properties, and then click Help. Print setting priorities There are two ways to change print settings for this printer: in the software application or in the printer driver.

  • Page 19

    With the embedded web server, you can gain access to the printer settings and information by typing an IP address or hostname of the printer in a web browser (such as Netscape Navigator or Microsoft® Internet Explorer) on any computer. You can use the embedded web server to configure the printer, view status information, purchase printer supplies, and obtain troubleshooting information.

  • Page 20: Printer Media Considerations, Supported Media Sizes

    ● Premature wear on the printer, requiring repair For best results, use only HP brand paper and print media. Hewlett-Packard Company cannot recommend the use of other brands. Because they are not HP products, HP cannot influence or control their quality.

  • Page 21: Printer Connections

    Printer connections This chapter provides information on the following topics: ● USB connections ● Network connections ● Wireless connections ● Wireless printing ENWW...

  • Page 22: Usb Connections, Connecting The Usb Cable

    USB connections The HP LaserJet 1022, 1022n, and 1022nw printer models support USB 2.0 High Speed connections. Connecting the USB cable 1. Plug the USB cable into the printer. 2. Plug the other end of the USB cable into the computer when prompted to do so during the software installation.

  • Page 23: Connecting To The Network

    Network connections The HP LaserJet 1022n and HP LaserJet 1022nw printers can connect to networks through the internal network port. The HP LaserJet 1022nw printer can also connect to 802.11b/g wireless networks. External network print servers are available for the HP LaserJet 1022n and 1022nw printers.

  • Page 24: Connect The Printer To A Wired Network, Install The Printer Software

    Connect the printer to a wired network To connect the HP LaserJet 1022n or HP LaserJet 1022nw printer to a wired network, you need the following: ● Functional wired network ● CAT-5 Ethernet cable To connect the printer to the network, perform the following steps: 1.

  • Page 25: Wireless Connections

    Wireless connections The HP LaserJet 1022nw printer includes the IEEE 802.11b/g standard for wireless networking. The HP LaserJet 1022n printer supports the IEEE 802.11b/g standard for wireless NOTE networking and Bluetooth wireless connectivity options through optional external accessories. For a complete list of available internal HP Jetdirect wireless print servers and HP bt1300 Wireless Printer Adapters (Bluetooth), see 10/100 networking and wireless print servers.

  • Page 26: Ieee 802.11b/g Standard, Bluetooth

    Wireless printing Wireless networks offer a safe, secure, and cost-effective alternative to traditional wired network connections. The HP LaserJet 1022nw printer has built-in wireless connectivity. For the other printer models, see 10/100 networking and wireless print servers for a list of available wireless print servers.

  • Page 27: Managing The Printer

    Managing the printer This chapter provides information on the following topics: ● Printer information pages ● Using the embedded web server ENWW...

  • Page 28: Demo Page, Configuration Page

    Printer information pages Special pages reside within the memory of the printer. These pages help you to diagnose and solve problems with the printer. Demo page The Demo page contains examples of text and graphics. To print the Demo page from the printer, press the button when the printer is ready (Ready light on).

  • Page 29: Using The Embedded Web Server, To Open The Embedded Web Server

    Using the embedded web server The embedded web server can be directly accessed on the HP LaserJet 1022n and HP LaserJet 1022nw printers. You do not need to install any software on the computer. You only need to have a supported web browser. To use the embedded web server, you must have Apple Safari, Microsoft Internet Explorer V5.5 or later, or Netscape Navigator V4.75 or later.

  • Page 30: Networking Tab, Other Links

    Settings tab This tab allows you to configure the printer settings from your computer, such as default paper size and EconoMode. If this printer is networked, always consult with the printer administrator before changing the settings on this tab. Networking tab This tab allows the network administrator to control network-related settings for the printer when it is connected to an IP-based network.

  • Page 31: Printing Tasks

    Printing tasks This chapter provides information on the following topics: ● Manual feed ● Canceling a print job ● Understanding print quality settings ● Optimizing print quality for media types ● Guidelines for using media ● Choosing paper and other media ●...

  • Page 32: Manual Feed, To Print Using Manual Feed

    Manual feed You can use manual feed when printing mixed media, for example, an envelope, then a letter, then an envelope, and so on. Feed an envelope into the priority feed slot and load letterhead into the main input tray. To print using manual feed 1.

  • Page 33: Canceling A Print Job

    Canceling a print job You can cancel a print job from a software application or a print queue. To stop the printer immediately, remove the remaining paper from the printer. After the printer stops, use one of the following options. ●...

  • Page 34: Understanding Print Quality Settings

    Understanding print quality settings Print quality settings affect how light or dark the print is on the page and the style in which the graphics are printed. You can also use the print quality settings to optimize the print quality for a specific media type. See Optimizing print quality for media types for more information.

  • Page 35: Optimizing Print Quality For Media Types

    Optimizing print quality for media types Media type settings control the temperature of your printer's fuser. You can change the settings for the media that you are using to optimize the print quality. You can access the optimizing feature from the Paper/Quality tab in your printer driver or from the embedded web server.

  • Page 36: Guidelines For Using Media, Paper

    Guidelines for using media The following sections provide guidelines and instructions for printing on transparencies, envelopes, and other special media. Guidelines and specifications are included to help you select media that optimizes print quality and avoid media that might cause jams or damage the printer.

  • Page 37: Labels

    Labels HP recommends that you print labels from the priority feed slot. Do not feed a sheet of labels through the printer more than once. The adhesive degrades CAUTION and might damage the printer. Label construction When selecting labels, consider the quality of the following components: ●...

  • Page 38: Cardstock And Heavy Media

    Envelopes with double-side seams An envelope with double-side-seam construction has vertical seams at both ends of the envelope rather than diagonal seams. This style might be more likely to wrinkle. Make sure that the seam extends all the way to the corner of the envelope as shown in the following illustration.

  • Page 39: Letterhead And Preprinted Forms

    Cardstock construction ● Smoothness: The 135-157 g/m (36-42 lb) cardstock should have a smoothness rating of 100-180 Sheffield; 60-135 g/m (16-36 lb) cardstock should have a smoothness rating of 100-250 Sheffield. ● Construction: Cardstock should lie flat with less than 5 mm (0.2 inches) of curl. ●...

  • Page 40: Choosing Paper And Other Media, Media To Avoid, Media That Might Damage The Printer

    Choosing paper and other media HP LaserJet printers produce excellent print quality documents. You can print on a variety of media, such as paper (including up to 100% recycled fiber content paper), envelopes, labels, transparencies, and custom-size media. The following are the supported media sizes: ●...

  • Page 41

    ● Do not use photo paper intended for Inkjet printers. ● Do not use paper that is embossed or coated and is not designed for the temperatures of the printer's image fuser. Select media that can tolerate temperatures of 200°C (392°F) for 0.1 second.

  • Page 42: Loading Media Into The Input Trays, Sheet Main Input Tray

    Loading media into the input trays The following sections describe how to load media into the different input trays. If you try to print on media that is wrinkled, folded, or damaged in any way, a jam might CAUTION occur. See Printer media considerations for more information.

  • Page 43: Printing An Envelope

    Printing an envelope Only use envelopes that are recommended for laser printers. See Printer media considerations for more information. Use the priority feed slot for printing one envelope. Use the main input tray for printing NOTE multiple envelopes. 1. Before loading the envelope, slide the media guides outward to slightly wider than the envelopes.

  • Page 44

    4. Access the printer properties (or printing preferences in Windows 2000 and XP). See Printer properties (driver) for instructions. 5. On the Paper/Quality tab (the Paper Type/Quality tab for some Macintosh drivers), select Envelope as the media type. NOTE Not all printer features are available in all drivers or operating systems. See the printer properties (driver) online Help for information about availability of features for that driver.

  • Page 45: Printing Multiple Envelopes

    Printing multiple envelopes Only use envelopes that are recommended for laser printers. See Printer media considerations for more information. Use the priority feed slot for printing one envelope. Use the main input tray for printing NOTE multiple envelopes. 1. Open the input tray cover. 2.

  • Page 46

    4. Adjust the media guides to the length and width of the envelopes. 5. Access the printer properties (or printing preferences in Windows 2000 and XP). See Printer properties (driver) for instructions. Not all printer features are available from all drivers or operating systems. See the printer NOTE properties (driver) online Help for information about availability of features for that driver.

  • Page 47: Printing On Transparencies Or Labels

    Printing on transparencies or labels Use only transparencies and labels that are recommended for use in laser printers, such as HP transparency film and HP LaserJet labels. See Printer media considerations for more information. Be sure to set the correct media type in the printer settings as instructed below. The printer CAUTION adjusts the fuser temperature according to the media type setting.

  • Page 48: Printing On Letterhead And Preprinted Forms

    Printing on letterhead and preprinted forms The HP LaserJet 1022, 1022n, and 1022nw printers can print on letterhead and preprinted forms that can withstand temperatures of 200°C (392°F). 1. Load the paper with the top forward and the side to be printed facing up. Adjust the media guides to fit the width of the paper.

  • Page 49: Printing On Custom-size Media And Cardstock

    Printing on custom-size media and cardstock The HP LaserJet 1022, 1022n, and 1022nw printers can print on custom-size media or cardstock between 76 x 127 mm (3 x 5 inches) and 216 x 356 mm (8.5 x 14 inches). Use the main input tray for multiple sheets. See Main input tray for the supported media sizes.

  • Page 50: Printing On Both Sides Of The Paper (manual Two-sided Printing)

    Printing on both sides of the paper (manual two-sided printing) To print on both sides of the paper (manual two-sided printing), you must run the paper through the printer twice. Manual two-sided printing can cause the printer to become dirty, reducing print quality. See NOTE Cleaning the printer for instructions if the printer becomes dirty.

  • Page 51

    5. Place the stack back in the input tray. Side one should be facing down with the bottom edge feeding into the printer first. Replace the media input tray cover. 6. Press the button on the control panel to print side two. ENWW Printing on both sides of the paper (manual two-sided printing)

  • Page 52: Printing Multiple Pages On A Single Sheet Of Paper (n-up Printing)

    Printing multiple pages on a single sheet of paper (N-up printing) You can select the number of pages that you want to print on a single sheet of paper. If you choose to print more than one page per sheet, the pages appear smaller and are arranged on the sheet in the order that they would otherwise be printed.

  • Page 53: Printing Booklets

    Printing booklets You can print booklets on letter or A4 paper. Macintosh computers do not currently support this feature. NOTE 1. Load the paper in the main input tray. 2. Access the printer properties (or printing preferences in Windows 2000 and XP). See Printer properties (driver) for instructions.

  • Page 54

    6. Press the button, and wait for side two to print. 7. Fold and staple the pages. Chapter 4 Printing tasks ENWW...

  • Page 55: Printing Watermarks

    Printing watermarks NOTE Macintosh computers do not currently support this feature. You can use the watermark option to print text "underneath" (in the background) of an existing document. For example, you might want to have large gray letters reading Draft or Confidential printed diagonally across the first page or all of the pages of a document.

  • Page 56

    Chapter 4 Printing tasks ENWW...

  • Page 57

    Maintenance This chapter provides information on the following topics: ● Cleaning the printer ● Changing the pickup roller ● Cleaning the pickup roller ● Changing the printer separation pad ● Redistributing toner ● Changing the print cartridge ENWW...

  • Page 58: Cleaning The Print Cartridge Area

    Cleaning the printer Clean the outside of the printer with a clean, damp cloth when necessary. Do not use ammonia-based cleaners on or around the printer. CAUTION During the printing process, media, toner, and dust particles can accumulate inside the printer.

  • Page 59: Cleaning The Printer Media Path

    3. With a dry, lint-free cloth, wipe any residue from the media path area and the print cartridge cavity. 4. Replace the print cartridge, and close the print cartridge door. 5. Plug the printer into the power outlet, and then turn on the printer. Cleaning the printer media path If you are experiencing toner specks or dots on the printouts, you can use the HP LaserJet cleaning utility to remove excess media and toner particles that can accumulate on the fuser...

  • Page 60

    For best results use a sheet of transparency. If you do not have any transparencies, you can NOTE use copier-grade media, 70 to 90 g/m (18 to 24 lb), with a smooth surface. 1. Make sure that the printer is idle and the Ready light is on. 2.

  • Page 61: Changing The Pickup Roller

    Changing the pickup roller Normal use with good media causes wear. The use of poor media might require more frequent replacement of the pickup roller. If the printer regularly mispicks (no media feeds through), you might need to change or clean the pickup roller.

  • Page 62

    3. Find the pickup roller. 4. Release the small, white tabs on either side of the pickup roller, and rotate the pickup roller toward the front. 5. Gently pull the pickup roller up and out. 6. Position the new pickup roller in the slot. The circular and rectangular slots on each side will prevent you from installing the roller incorrectly.

  • Page 63

    8. Reinstall the print cartridge, and close the print cartridge door. 9. Plug the printer into the power outlet, and then turn on the printer. ENWW Changing the pickup roller...

  • Page 64: Cleaning The Pickup Roller

    Cleaning the pickup roller If you want to clean the pickup roller rather than replace it, follow the instructions below: 1. Remove the pickup roller as described in steps 1 through 5 of Changing the pickup roller. 2. Dab a lint-free cloth in isopropyl alcohol, and scrub the roller. Alcohol is flammable.

  • Page 65: Changing The Printer Separation Pad

    Changing the printer separation pad Normal use with good media causes wear. The use of poor media might require more frequent replacement of the separation pad. If the printer regularly pulls multiple sheets of media at a time, you might need to change the separation pad. See Ordering supplies order a new printer separation pad.

  • Page 66

    4. Insert the new separation pad, and screw it into place. 5. Plug the printer into the power outlet, and turn on the printer. Chapter 5 Maintenance ENWW...

  • Page 67: Redistributing Toner

    Redistributing toner When toner is low, faded or light areas appear on the printed page. You might be able to temporarily improve print quality by redistributing the toner, which means that you might be able to finish the current print job before replacing the print cartridge. To prevent damage to the print cartridge, minimize its exposure to direct light.

  • Page 68

    If the print is still light, install a new print cartridge. See Changing the print cartridge instructions. Chapter 5 Maintenance ENWW...

  • Page 69: Changing The Print Cartridge

    Changing the print cartridge CAUTION To prevent damage to the print cartridge, minimize its exposure to direct light. Cover the print cartridge with a sheet of paper. 1. Open the print cartridge door, and remove the old print cartridge. See the recycling information inside the print cartridge box.

  • Page 70

    4. Insert the new print cartridge in the printer, making sure that the print cartridge is in position. Close the print cartridge door. CAUTION If toner gets on your clothing, wipe it off with a dry cloth and wash the clothing in cold water. Hot water sets toner into the fabric.

  • Page 71: Problem Solving

    Problem solving This chapter provides information on the following topics: ● Finding the solution ● Status light patterns ● Paper handling problems ● Printed page is different than what appeared on screen ● Printer software problems ● Improving print quality ●...

  • Page 72: Step 1: Is The Printer Set Up Correctly, Step 2: Is The Ready Light On

    Finding the solution You can use this section to find the solution to common printer problems. Step 1: Is the printer set up correctly? ● Is the printer plugged into a power outlet that is known to work? ● Is the no/off switch in the on position? ●...

  • Page 73: Step 4: Is The Print Quality Acceptable

    Step 4: Is the print quality acceptable? If the print quality is acceptable, go to Step 5: Is the printer communicating with the computer? If the print quality is poor, see Improving print quality. Verify that the print settings are correct for the media you are using.

  • Page 74: Status Light Patterns

    Status light patterns Light status legend Symbol for "light off" Symbol for "light on" Symbol for "light blinking" Control panel light message Light status State of the printer Action Ready No action is necessary. The printer is ready to print. Processing data Wait for the job to print.

  • Page 75

    Control panel light message (continued) Light status State of the printer Action Out of memory The page you are printing might be too complex for the The printer is out of memory. printer's memory capacity. Try lowering the resolution. See Understanding print quality settings for more information.

  • Page 76: Paper Handling Problems, Media Jam, Print Is Skewed (crooked)

    Paper handling problems Choose the item that best describes the problem: ● Media jam ● Print is skewed (crooked) ● More than one sheet of media feeds through the printer at one time ● Printer does not pull media from the media input tray ●...

  • Page 77: Printer Curled The Media, Print Job Is Extremely Slow

    Printer curled the media ● Curl or wave for more information. ● Media paths Choosing paper and other media for more information. Print job is extremely slow The maximum speed of the printer is up to 18 ppm for A4 media and 19 ppm for letter media for the HP LaserJet 1022, 1022n, 1022nw printers.

  • Page 78: Printed Page Is Different Than What Appeared On Screen, Garbled, Incorrect, Or Incomplete Text

    Printed page is different than what appeared on screen Choose the item that best describes the problem: ● Garbled, incorrect, or incomplete text ● Missing graphics or text, or blank pages ● Page format is different than on another printer ●...

  • Page 79: Page Format Is Different Than On Another Printer

    ● The graphic settings in the printer properties might not be correct for the type of job that you are printing. Try a different graphic setting in the printer properties. See Printer properties (driver) for more information. ● Clean the printer, particularly the contacts between the print cartridge and the power supply.

  • Page 80: Printer Software Problems

    Printer software problems Windows problems Problem Solution A printer driver for the HP LaserJet 1022 printer ● Restart the computer. is not visible in the Printer folder. ● Reinstall the printer software. In the Windows task bar, click Start, select Programs, select HP, select HP LaserJet 1020 series, and then click Uninstall HP LaserJet 1020 series.

  • Page 81

    Windows problems (continued) Problem Solution The printer is in Ready mode, but nothing prints. ● Restart the computer. ● Print a Configuration page from the control panel of the printer, and verify the printer functionality. ● Verify that all of the cables are properly seated and within specifications.

  • Page 82: Light Or Faded Print, Toner Specks, Dropouts

    Improving print quality This section provides information about identifying and correcting print defects. Light or faded print ● The toner supply is low. See Redistributing toner for more information. ● The media might not meet HP's media specifications (for example, the media is too moist or too rough).

  • Page 83: Vertical Lines, Gray Background, Toner Smear

    NOTE If these steps do not correct the problem, contact an HP-authorized dealer or service representative. Vertical lines ● Make sure that the tray cover is in place. ● The photosensitive drum inside the print cartridge has probably been scratched. Install a new HP print cartridge.

  • Page 84: Loose Toner, Vertical Repetitive Defects, Misformed Characters

    Loose toner ● Clean the inside of the printer. See Cleaning the printer for instructions. ● Check the media type and quality. See Printer media considerations for more information. ● Install a new HP print cartridge. See Changing the print cartridge for instructions.

  • Page 85: Page Skew, Curl Or Wave, Wrinkles Or Creases

    Page skew ● Make sure that the media is loaded correctly and the media guides are not too tight or too loose against the media stack. See Loading media into the input trays for more information. ● The input bin might be too full. See Loading media into the input trays for more...

  • Page 86: Water Droplets On Bottom Edge, Toner Scatter Outline

    Toner scatter outline ● If large amounts of toner have scattered around the characters, the media might be resisting the toner. (A small amount of toner scatter is normal for laser printing.) Try a different media type. See Printer media considerations for more information.

  • Page 87: Clearing Jams, Typical Media Jam Locations, Removing A Jammed Page

    Clearing jams CAUTION To prevent damage to the printer when clearing jams, including jams in the output bin, always open the print cartridge door and remove the print cartridge. Keep the door open and the cartridge out until the jam has been cleared. Opening the print cartridge door and removing the print cartridge relieves tension on the printer rollers, which prevents damage to the printer and makes the removal of jammed pages easier.

  • Page 88

    CAUTION To prevent damage to the printer when clearing jams, including jams in the output bin, always open the print cartridge door and remove the print cartridge. 1. Open the print cartridge door, and remove the print cartridge. To prevent damage to the print cartridge, minimize its exposure to direct light. Cover the CAUTION print cartridge with a sheet of paper.

  • Page 89

    3. When you have removed the jammed media, replace the print cartridge, and close the print cartridge door. After clearing a media jam, you might need to turn the printer off and turn it back on again. When you add new media, remove all of the media from the input tray and straighten the NOTE stack of new media.

  • Page 90: Wired Network Setup Problem Solving

    Wired network setup problem solving If the computer is unable to discover the HP LaserJet 1022n or HP LaserJet 1022nw printer, perform the following steps: 1. Check the cables to ensure that they are properly connected. Check all of the following connections: ●...

  • Page 91: A Printer Specifications

    Printer specifications This appendix provides information on the following topics: ● Environmental specifications ● Acoustic emissions ● Electrical specifications ● Physical specifications ● Printer capacities and ratings ● Memory specifications ● Port availability ENWW...

  • Page 92: Environmental Specifications

    Environmental specifications Operating environment Install in a well-ventilated, dust-free area. Printer plugged into an AC outlet: ● Temperature: 10°C to 32.5°C (50°F to 90.5°F) ● Humidity: 20% to 80% (no condensation) Storage environment Printer unplugged from an AC outlet: ● Temperature: 0°C to 40°C (32°F to 104°F) ●...

  • Page 93: Acoustic Emissions

    Acoustic emissions 1, 2 Acoustic emissions Sound power level Declared per ISO 9296 = <6.2 Bels (A) and 62dB (A) Printing Ready (PowerSave) Inaudible Sound pressure level bystander position Declared Per ISO 9296 = ≤4.9 Bels (A) and 49dB (A) Printing Ready (PowerSave): essentially inaudible Inaudible...

  • Page 94: Electrical Specifications

    Electrical specifications WARNING! Power requirements are based on the country/region where the printer is sold. Do not convert operating voltages. Doing so might damage the printer and void the product warranty. 110-volt models 230-volt models Power requirements 110-127v (+/-10%) 220v-240v (+/-10%) 50/60 Hz (+/-2 Hz) 50/60 Hz (+/-2 Hz) Rated current...

  • Page 95: Physical Specifications

    Physical specifications Dimensions ● Width: 370 mm (14.6 inches) ● Depth: 245 mm (9.6 inches) ● Height: 241 mm (9.5 inches) Weight (2,000-page cartridge installed) 6.3 kg (13.9 lb) Values are current as of April 1, 2004. Values are subject to change without notice. See NOTE http://www.hp.com/support/lj1022/ for current information.

  • Page 96: Printer Capacities And Ratings

    Printer capacities and ratings Print speed ● 18 ppm for A4 and 19 for letter ● First page out in as low as 8 seconds Main input tray capacity 250 sheets of regular weight 75 g/m (20 lb) paper Priority feed slot capacity 10 sheets of media up to 163 g/m (43 lb) Top (face down) output bin capacity...

  • Page 97: Memory Specifications

    Memory specifications Base memory 8 MB RAM ENWW Memory specifications...

  • Page 98: Port Availability

    Port availability Compatible with USB 2.0 High Speed specifications Network RJ-45, Ethernet 10/100 (HP LaserJet 1022n and HP LaserJet 1022nw printers only) Wireless 802.11b/g (HP LaserJet 1022nw printer only) Appendix A Printer specifications ENWW...

  • Page 99: Fcc Compliance

    Regulatory information FCC compliance This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy.

  • Page 100: Declaration Of Conformity

    The product herewith complies with the requirements of the EMC Directive 89/336/EEC and the Low Voltage Directive 73/23/EEC, and carries the CE-marking accordingly. 1) The product was tested in a typical configuration with Hewlett-Packard Personal Computer Systems. Compliance testing of product to standard with exception of clause 9.5, which is not yet in effect.

  • Page 101: Regulatory Statements, Laser Safety Statement, Canadian Doc Regulations

    Regulatory statements Laser safety statement The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration has implemented regulations for laser products manufactured since August 1, 1976. Compliance is mandatory for products marketed in the United States. The printer is certified as a "Class 1"...

  • Page 102: Laser Statement For Finland

    Laser statement for Finland LASERTURVALLISUUS LUOKAN 1 LASERLAITE KLASS 1 LASER APPARAT HP LaserJet 1022, HP LaserJet 1022n, HP LaserJet 1022nw -laserkirjoitin on käyttäjän kannalta turvallinen luokan 1 laserlaite. Normaalissa käytössä kirjoittimen suojakotelointi estää lasersäteen pääsyn laitteen ulkopuolelle. Laitteen turvallisuusluokka on määritetty standardin EN 60825-1 (1994) mukaisesti. VAROITUS! Laitteen käyttäminen muulla kuin käyttöohjeessa mainitulla tavalla saattaa altistaa käyttäjän turvallisuusluokan 1 ylittävälle näkymättömälle lasersäteilylle.

  • Page 103: Environmental Product Stewardship Program, Protecting The Environment, Ozone Production, Paper Use, Plastics

    Environmental product stewardship program Protecting the environment Hewlett-Packard Company is committed to providing quality products in an environmentally sound manner. This product has been designed with several attributes to minimize impacts on our environment. Ozone production This product generates no appreciable ozone gas (O...

  • Page 104: Hp Laserjet Printing Supplies, Hp Printing Supplies Returns And Recycling Program Information, Paper, Material Restrictions

    HP LaserJet printing supplies In many countries/regions, this product's printing supplies (for example, print cartridge, drum) can be returned to HP through the HP Printing Supplies Returns and Recycling Program. An easy-to-use and free take back program is available in more than 30 countries/regions.

  • Page 105

    ● HP's end-of-life product return and recycling program ● Material safety data sheets Visit: http://www.hp.com/go/environment http://www.hp.com/hpinfo/community/ environment/productinfo/safety. ENWW Environmental product stewardship program...

  • Page 106: Material Safety Data Sheet

    Material safety data sheet Material Safety Data Sheets (MSDS) for supplies containing chemical substances (for example, toner) can be obtained by contacting the HP website at: http://www.hp.com/go/ msds or http://www.hp.com/hpinfo/community/environment/productinfo/safety. Appendix B Regulatory information ENWW...

  • Page 107: Hewlett-packard Limited Warranty Statement

    Warranty and licensing Hewlett-Packard limited warranty statement HP PRODUCT DURATION OF LIMITED WARRANTY HP LaserJet 1020 series printer One-year limited warranty HP warrants to you, the end-user customer, that HP hardware and accessories will be free from defects in materials and workmanship after the date of purchase, for the period specified above.

  • Page 108

    TO THE EXTENT ALLOWED BY LOCAL LAW, THE REMEDIES IN THIS WARRANTY STATEMENT ARE YOUR SOLE AND EXCLUSIVE REMEDIES. EXCEPT AS INDICATED ABOVE, IN NO EVENT WILL HP OR ITS SUPPLIERS BE LIABLE FOR LOSS OF DATA OR FOR DIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL (INCLUDING LOST PROFIT OR DATA), OR OTHER DAMAGE, WHETHER BASED IN CONTRACT, TORT, OR OTHERWISE.

  • Page 109: Hewlett-packard Software License Agreement

    The following License Terms govern your use of the accompanying Software unless you have a separate signed agreement with Hewlett-Packard. License Grant. Hewlett-Packard grants you a license to use one copy of the Software. "Use" means storing, loading, installing, executing, or displaying the Software. You may not modify the Software or disable any licensing or control features of the Software.

  • Page 110: Print Cartridge Limited Warranty

    Print cartridge limited warranty This HP product is warranted to be free from defects in materials and workmanship. This warranty does not apply to products that (a) have been refilled, refurbished, remanufactured or tampered with in any way, (b) experience problems resulting from misuse, improper storage, or operation outside of the published environmental specifications for the printer product or (c) exhibit wear from ordinary use.

  • Page 111

    HP parts and accessories This appendix provides information on the following topics: ● Ordering supplies ● 10/100 networking and wireless print servers ● Using HP print cartridges ENWW...

  • Page 112: Ordering Supplies

    Ordering supplies You can increase the printer's capabilities with optional accessories and supplies. Use accessories and supplies specifically designed for the HP LaserJet 1020 series printer to ensure optimum performance. The HP LaserJet 1020 series printer includes the HP LaserJet 1022, 1022n, and 1022nw NOTE printer models.

  • Page 113

    Ordering information (continued) Item Description or use Order number Media pickup roller Used to pick the media RL1-2066 Replacement parts from the input tray and advance it through the printer. Separation pad for the Used to keep multiple RL1-0269 printer sheets from feeding through the printer path.

  • Page 114: Networking And Wireless Print Servers

    10/100 networking and wireless print servers HP LaserJet 1022n Item and description Order number HP Jetdirect 380x 802.11b wireless external J6061A print server (full-featured, USB port) Appendix D HP parts and accessories ENWW...

  • Page 115: Using Hp Print Cartridges, Hp Policy On Non-hp Print Cartridges, Storing Print Cartridges

    Hewlett-Packard Company cannot recommend the use of non-HP print cartridges, either new, refilled, or remanufactured. Since they are not HP products, Hewlett-Packard cannot influence their design or control their quality. Service or repair that is required as a result of using non-HP print cartridges will not be covered under the printer warranty.

  • Page 116

    Appendix D HP parts and accessories ENWW...

  • Page 117: Service And Support

    Service and support This appendix provides information on the following topics: ● Availability of support and service ● Guidelines for repacking the printer ● How to contact HP ENWW...

  • Page 118: Availability Of Support And Service

    Availability of support and service Around the world, HP provides a variety of service and support options for purchase. Availability of these programs will vary depending upon your location. HP Care Pack™ Services and Service Agreements HP has various service and support options that meet a wide range of needs. These options are not part of the standard warranty.

  • Page 119: Guidelines For Repacking The Printer

    Remove and keep any cables, trays, and optional accessories installed in the printer. ● If possible, include print samples and 5 to 10 sheets of paper or other media that did not print correctly. ● Hewlett-Packard recommends that you insure the equipment for shipment. ENWW Guidelines for repacking the printer...

  • Page 120: How To Contact Hp

    How to contact HP If you need to contact HP for service or support, use one of the following links: ● In the United States, see http://www.hp.com/support/lj1022/ for the HP LaserJet 1020 series printer. The HP LaserJet 1020 series printer includes the HP LaserJet 1022, 1022n, and 1022nw NOTE printer models.

  • Page 121

    Index Symbols/Numerics contracts, maintenance 110 10/100 networking and wireless print servers 106 control panel 5 custom-size media, printing 41 customer support accessories, ordering 104 maintenance agreements 110 acoustics emissions 85 agreements, maintenance 110 Attention light 4 Demo page 20 door, print cartridge 4 duplex (two-sided) printing blank pages 70 manual 42...

  • Page 122

    supported sizes 12 heavy media, guidelines for using 30 types that might damage the printer 32 HP SupportPack 110 types to avoid 32 media guides main input tray 6 IEEE 802.11b/g standard 18 priority feed slot 6 improving print quality 74 media paths Information tab (embedded web server) 21 cleaning 51...

  • Page 123

    print quality multiple pages on a single sheet of paper 44 creases 77 N-up 44 curl 77 on both sides of the paper (manual) 42 dropouts 74 transparencies 39 gray background 75 watermarks 47 light or faded print 74 priority feed slot loose toner 76 loading 34 misformed characters 76...

  • Page 124: Table Of Contents

    sites for download 2 dropouts 74 software license agreement 101 garbled text 70 supported operating systems 8 gray background 75 specifications incomplete text 70 acoustics 85 light or faded print 74 capacities and ratings 88 loose toner 76 electrical 86 misformed characters 76 environmental 84 missing graphics or text 70...

  • Page 126

    © 2006 Hewlett-Packard Development Company, L.P. www.hp.com *Q5912-90949* *Q5912-90949* Q5912-90949...

Comments to this Manuals

Symbols: 0
Latest comments:
  • gary Dec 14, 2015 05:12:
    how do you check a meter reading (no. of copies made) on an HP1022