Autodesk AUTOCAD LT 2010 Tips And Tricks Manual page 4

The ribbon also responds to object
selection, displaying the tools that are
most appropriate for working with that
object. For example, when you select an
external reference, you'll see the External
Reference contextual tab appear on the
ribbon. This tab contains features and
commands specifically for external refer-
ences, such as Edit and Clip. AutoCAD LT
2010 comes pre-loaded with several con-
textual tab states, and you can choose
the tab—whether a built-in one or one of
your own—that you want to appear for
each type of object.
Use the CUI editor to convert dash-
board panels from AutoCAD LT 2008
into ribbon panels that can be used in
AutoCAD LT 2010.
Pressing ALT brings up visual
indicators of key combinations you can
use to activate ribbon tabs or individual
commands.
The Quick Access Toolbar
The Quick Access toolbar has also seen
its share of updates. The Undo and Redo
tools now include history support, so
you can see exactly what actions will be
affected.
You can easily remove a command from
the toolbar with an option on the right-
click menu. The right-click menu also
contains a separator tool to help you
organize your toolbar, and a toggle to
display the Quick Access toolbar above
or below the ribbon.
4