Functional Description; Carton Contents - Delta SHOPMASTER SM200L Instruction Manual

10" motorized bench saw

Hide thumbs

Table Of Contents

Table of Contents

Available languages

EXTENSION CORDS

Use proper extension cords. Make sure

your extension cord is in good condition and is a 3-wire

extension cord which has a 3-prong grounding type plug

and matching receptacle which will accept the machine's

plug. When using an extension cord, be sure to use one

heavy enough to carry the current of the machine. An

undersized cord will cause a drop in line voltage,

resulting in loss of power and overheating. Fig. C shows

the correct gauge to use depending on the cord length.

If in doubt, use the next heavier gauge. The smaller the

gauge number, the heavier the cord.

FOREWORD

ShopMaster Model SM200L is a 10" Table Saw designed to give high quality performance with depth of cut capacity up

to 3" (76mm) at 90° and 2" (51mm) at 45° for clean cutting of standard stock sizes. Delta ShopMaster Model TS200LS

includes the saw with a 13 amp 120V motor, a metal stand, rip fence, miter gage, see-through blade guard with splitter

and anti-kickback fingers, a 10" carbide-tipped saw blade, table insert and blade wrenches. The TS200 is the same saw

without the stand.

NOTICE: THE PHOTO ON THE MANUAL COVER ILLUSTRATES THE

CURRENT PRODUCTION MODEL. ALL OTHER ILLUSTRATIONS CONTAINED

IN THE MANUAL ARE REPRESENTATIVE ONLY AND MAY NOT DEPICT THE

ACTUAL COLOR, LABELING OR ACCESSORIES AND ARE INTENDED TO

ILLUSTRATE TECHNIQUE ONLY.

MOTORIZED BENCH SAW PARTS

Fig. 1 illustrates the saw removed from the container.

Figs. 2 and Fig. 3 illustrate the loose items packed with

the saw. Fig. 4 illustrates the loose items packed for the

stand.