VMware VCENTER CONVERTER STANDALONE 4.3 User Manual page 61

Procedure
1 From the Disk controller drop-down menu, select a disk controller for the destination virtual disk.
Option
SCSI Bus Logic
IDE
LSI Logic
LSI Logic SAS
Preserve source
2 Save your settings.
Option
Select another option from the
options list
Click Next
Configure the Network Settings of the Destination Virtual Machine
You can change the number of network adapters and select the network that the destination virtual machine
uses. You can also set network adapters to connect to the network when the destination virtual machine powers
on.
N You cannot use IPv6 to customize the guest operating systems of virtual machines.
OTE
Prerequisites
On the Options page of the Conversion wizard, select Networks from the options list.
Procedure
1 From the Network adapters to connect drop-down menu, select the number of network adapters to be
used by the destination virtual machine.
2 Use the Network drop-down menu to select the network that the adapter connects to.
3 To connect an adapter when you power on the destination virtual machine, select the Connect at power-
on check box.
4 Save your settings.
Option
Select another option from the
options list
Click Next
VMware, Inc.
Description
Use SCSI virtual disks in the destination virtual machine.
Use IDE virtual disks in the destination virtual machine.
Use LSI Logic SCSI virtual disks in the destination virtual machine.
Use LSI Logic SCSI (SAS) virtual disks in the destination virtual machine.
Use the same types of disk controllers as those installed on the source
machine.
Description
Saves your settings and displays the pane for the selected option.
Saves your settings and displays the next page of the Conversion wizard.
The Customizations page is displayed if you select Customize guest
n
preferences for the virtual machine in the Advanced options pane.
The Summary page is displayed if you do not select Customize guest
n
preferences for the virtual machine in the Advanced options pane.
Description
Saves your settings and displays the pane for the selected option.
Saves your settings and displays the next page of the Conversion wizard.
The Customizations page is displayed if you select Customize guest
n
preferences for the virtual machine in the Advanced options pane.
The Summary page is displayed if you do not select Customize guest
n
preferences for the virtual machine in the Advanced options pane.
Chapter 4 Convert a Physical or Virtual Machine
61