What To Do If - Aeg Competence 390 S Instruction Book

What to do if

the illumination of the control
.the control lamp for the child/user
work?
1. May be you have not operated the switch quite correctly.
Repeat your selection.
2. May be the fuses in the fuse-box are not in working order.
. the fuses blow repeatedly?
Call the AEG service engineer.
my time of day is flashing 00:00 or 0:00 in the display! Reset my
time of day.
.. the audible tone of my timer
Press the corresponding button A
my timer display does not show?
. incorrect indications
My timer has been wrongly operated or there has been a short
power cut. Isolate my oven from the power supply, wait 30
seconds, and then switch on the power.
Reset the time of day on my electronic timer.
If,however,you decide to call in theservice centre to helpwith anyof
the stated instructionsor on grounds of faulty operation,the service
engineer's visit cannot be made freeof charge even during the gua-
rantee period.
AEG electrical appliances comply with the valid safety require-
ments.Repairsto electrical appliances should only be performedby
a trained electrician. Improper repairs may place the user at serous
risk.
(something goes wrong?)
knob does
safety device does not
is emitting
or B
appear in my display?
not work?
a continuous tone.
to switch it off!
Faults
you can rectify
yourself
19