GMC YUKON XL 2004 Owner's Manual

page of 554

/ 554
Contents
Table of Contents
Bookmarks

Table of Contents

Quick Links

Download this manual

2004 GMC Yukon/Yukon XL Owner Manual

Seats and Restraint Systems ........................... 1-1

Front Seats

............................................... 1-3

Rear Seats

............................................... 1-8

Safety Belts

............................................. 1-23

Child Restraints

....................................... 1-45

Air Bag Systems

...................................... 1-72

Restraint System Check

Features and Controls ..................................... 2-1

Keys

........................................................ 2-3

Doors and Locks

....................................... 2-8

Windows

................................................. 2-15

Theft-Deterrent Systems

Starting and Operating Your Vehicle

Mirrors

.................................................... 2-43

System

OnStar

...................................... 2-53

HomeLink

Transmitter

Storage Areas

......................................... 2-60

Sunroof

.................................................. 2-63

Vehicle Personalization

Instrument Panel ............................................. 3-1

Instrument Panel Overview

Climate Controls

...................................... 3-22

Warning Lights, Gages and Indicators

Driver Information Center (DIC)

Audio System(s)

....................................... 3-77

............................ 1-87

............................ 2-18

........... 2-20

............................. 2-55

............................. 2-64

.......................... 3-4

......... 3-40

.................. 3-58

Driving Your Vehicle ....................................... 4-1

Your Driving, the Road, and Your Vehicle

Towing

................................................... 4-53

Service and Appearance Care .......................... 5-1

Service

..................................................... 5-3

Fuel

......................................................... 5-4

Checking Things Under the Hood

All-Wheel Drive

........................................ 5-51

Rear Axle

............................................... 5-52

Four-Wheel Drive

..................................... 5-53

Front Axle

............................................... 5-54

Bulb Replacement

Windshield Wiper Blade Replacement

Tires

...................................................... 5-63

Appearance Care

Vehicle Identiﬁcation

Electrical System

.................................... 5-113

Capacities and Speciﬁcations

Maintenance Schedule ..................................... 6-1

Maintenance Schedule

Customer Assistance and Information .............. 7-1

Customer Assistance and Information

Reporting Safety Defects

Index ................................................................ 1

................. 5-10

.................................... 5-55

......... 5-62

................................... 5-103

............................... 5-112

................... 5-122

................................ 6-2

........... 7-2

........................... 7-11

..... 4-2

Table of Contents

Chapters

Table of Contents

Summary of Contents for GMC YUKON XL 2004

Page 1 2004 GMC Yukon/Yukon XL Owner Manual Seats and Restraint Systems ......1-1 Driving Your Vehicle ........4-1 Front Seats ..........1-3 Your Driving, the Road, and Your Vehicle ..4-2 Rear Seats Towing ..........1-8 ........... 4-53 Safety Belts ..........1-23 Service and Appearance Care ......
Page 2: How To Use This Manual
For vehicles ﬁrst sold in Canada, substitute the name “General Motors of Canada Limited” for GMC whenever it appears in this Index manual. A good place to look for what you need is the Index in Please keep this manual in your vehicle, so it will be back of the manual.
Page 3 Safety Warnings and Symbols In the caution area, we tell you what the hazard is. Then we tell you what to do to help avoid or reduce the hazard. Please read these cautions. If you don’t, you You will ﬁnd a number of safety cautions in this book. or others could be hurt.
Page 4 Vehicle Damage Warnings Vehicle Symbols Also, in this book you will ﬁnd these notices: Your vehicle has components and labels that use symbols instead of text. Symbols, used on your vehicle, Notice: These mean there is something that could are shown along with the text describing the operation damage your vehicle.
Page 5 These are some examples of symbols you may ﬁnd on your vehicle:...
Page 6 Model Reference This manual covers these models: Yukon XL (Extended Model) Yukon...
Page 7 Section 1 Seats and Restraint Systems Front Seats ............1-3 Rear Safety Belt Comfort Guides for Children Manual Seats ..........1-3 and Small Adults ........1-42 Power Seats ..........1-4 Safety Belt Extender ........1-44 Power Lumbar ..........1-5 Child Restraints ..........1-45 Heated Seats ..........1-5 Older Children ..........1-45 Reclining Seatbacks ........1-6 Infants and Young Children ......1-48 Head Restraints ..........1-7...
Page 8 Section 1 Seats and Restraint Systems Air Bag Systems ..........1-72 Servicing Your Air Bag-Equipped Vehicle ..1-86 Where Are the Air Bags? .......1-75 Adding Equipment to Your Air Bag-Equipped When Should an Air Bag Inﬂate? ....1-77 Vehicle ............1-86 What Makes an Air Bag Inﬂate? .....1-79 Restraint System Check ........1-87 How Does an Air Bag Restrain? .....1-79 Checking Your Restraint Systems ....1-87...
Page 9: Front Seats
Front Seats Manual Seats CAUTION: You can lose control of the vehicle if you try to adjust a manual driver’s seat while the vehicle is moving. The sudden movement could startle and confuse you, or make you push a pedal when you don’t want to.
Page 10 Power Seats If your vehicle has a power seat, you can adjust it with these controls located on the outboard sides of the seats. • Raise or lower the front of the seat cushion by raising or lowering the forward edge of the horizontal control. •...
Page 11: Power Lumbar
Power Lumbar Heated Seats You can increase or If your vehicle has this decrease lumbar support feature, the button used to in an area of the lower control the driver’s seatback. heated seat is located on the driver’s door panel. The button used to control the passenger’s heated seat is located on the...
Page 12: Reclining Seatbacks
Reclining Seatbacks To adjust the front seatback, lift the manual lever But don’t have a seatback reclined if your vehicle is located on the outboard side of the seat. Release the moving. lever to lock the seatback where you want it. Lift the lever again without pushing on the seatback and the seatback will go to an upright position.
Page 13: Head Restraints
Head Restraints CAUTION: Sitting in a reclined position when your vehicle is in motion can be dangerous. Even if you buckle up, your safety belts can’t do their job when you’re reclined like this. The shoulder belt can’t do its job. In a crash, you could go into it, receiving neck or other injuries.
Page 14: Rear Seats
Rear Seats Tilt the seatback toward the front of the vehicle by pulling the top of the seat forward. When you do the seat bottom will release. Pull the seat forward until it stops. Rear Seat Operation Be sure to return the seat to the passenger position when ﬁnished.
Page 15: Folding The Seatbacks
Folding the Seatbacks To fold, pull up on the strap loop at the rear of the seat cushion. Then, pull the seat cushion CAUTION: up and fold it forward. If the seatback isn’t locked, it could move forward in a sudden stop or crash. That could cause injury to the person sitting there.
Page 16 To return the seat to the passenger position on a extended model do the following: 1. Lift the ﬂoor load panels and latch them into the seatback. 2. Lift the seatback up and push rearward all the way. 3. Lower the seat cushion until it latches into position.
Page 17 50/50 Split Bench Seat To fold the seatbacks do the following: • Pull up on the release lever, labeled 1, located on If your vehicle has a 50/50 split bench, the seatback(s) the rear of the seatback, and push the seatback can be folded and the entire seat(s) tilted or removed forward.
Page 18: Tilting The 50/50 Split Bench Seat
Tilting the 50/50 Split Bench Seat Once the third seatback has been folded down, the entire seat can be tilted forward to create a ﬂat load ﬂoor. To do this, do the following: CAUTION: 1. Enter the rear cargo area of the vehicle. 2.
Page 19: Removing The 50/50 Split Bench Seat
To return the seat to the seating position do the following: Removing the 50/50 Split Bench Seat 1. Push forward on the seat and release the support To remove the 50/50 split bench seat, do the following: lock rod. 1. Open the rear doors and enter the rear of the 2.
Page 20: Replacing The 50/50 Split Bench Seat
3. To unlatch the seat Replacing the 50/50 Split Bench Seat from the ﬂoor, pull up on the release lever labeled 2, located at the CAUTION: rear of the seat, and lift the rear of the seat up off the ﬂoor. If the seatback isn’t locked, it could move forward in a sudden stop or crash.
Page 21 To reinstall the 50/50 split bench, do the following: 1. While holding the rear of the seat up, slide the front CAUTION: wheels into the slots on the ﬂoor. The front latches should lock into place. If the latches do not lock, A safety belt that is improperly routed, not try tilting the rear of the seats upwards.
Page 22: Bench Seat
Bench Seat To fold the seatback on the bench seat, do the following: 1. Pull up on the release If your vehicle has a full bench seat, the seatback can lever, labeled 1, be folded and the seat can be tilted or removed from the located on the rear of vehicle.
Page 23: Tilting The Bench Seat
Tilting the Bench Seat CAUTION: CAUTION: If the support rod isn’t properly engaged, the folded third row seat could come loose in a If the seatback isn’t locked, it could move sudden stop or crash. That could cause injury forward in a sudden stop or crash. That could to people and damage to your vehicle.
Page 24 3. With the seat folded, 5. Tilt the seat fully forward and secure it in place unlatch the seat from using the support rod located on the underside the ﬂoor by pulling of the seat on the passenger’s side. Make sure the up on the lever located rod pin is fully engaged in the lock.
Page 25: Removing The Bench Seat
Removing the Bench Seat 3. To unlatch the seat from the ﬂoor, pull up To remove the full bench seat, do the following: on the release lever labeled 2, located at the 1. Open the rear doors and enter the rear of the rear of the seat, and lift vehicle.
Page 26: Replacing The Bench Seat
Replacing the Bench Seat CAUTION: CAUTION: A safety belt that is improperly routed, not properly attached, or twisted won’t provide the If the seatback isn’t locked, it could move protection needed in a crash. The person forward in a sudden stop or crash. That could wearing the belt could be seriously injured.
Page 27: Bucket Seats
Bucket Seats Folding the Seatbacks If your vehicle has bucket seats, the seatbacks can be reclined and the seats can be folded to give you CAUTION: more cargo room. Reclining the Seatbacks If the seatback isn’t locked, it could move forward in a sudden stop or crash.
Page 28 To fold the seatbacks on the bucket seats, do the If the seatback cannot fold ﬂat because it interferes with following: the cushion, try moving the front seat forward and/or bringing the front seatback more upright. 1. Pull up on the strap loop located at the rear Once the seatbacks are folded down, the rear seat of the seat cushion and...
Page 29: Safety Belts
Safety Belts CAUTION: Safety Belts: They Are for Everyone It is extremely dangerous to ride in a cargo This part of the manual tells you how to use safety area, inside or outside of a vehicle. In a belts properly. It also tells you some things you should collision, people riding in these areas are more not do with safety belts.
Page 30: Why Safety Belts Work
You never know if you’ll be in a crash. If you do have a Why Safety Belts Work crash, you don’t know if it will be a bad one. When you ride in or on anything, you go as fast as A few crashes are mild, and some crashes can be so it goes.
Page 31 Put someone on it. Get it up to speed. Then stop the vehicle. The rider doesn’t stop. 1-25...
Page 32 The person keeps going until stopped by something. In or the instrument panel... a real vehicle, it could be the windshield... 1-26...
Page 33: Questions And Answers About Safety Belts
Questions and Answers About Safety Belts Won’t I be trapped in the vehicle after an accident if I’m wearing a safety belt? You could be – whether you’re wearing a safety belt or not. But you can unbuckle a safety belt, even if you’re upside down.
Page 34: How To Wear Safety Belts Properly
How to Wear Safety Belts Properly If I’m a good driver, and I never drive far from home, why should I wear safety belts? This part is only for people of adult size. You may be an excellent driver, but if you’re in an Be aware that there are special things to know about accident –...
Page 35 Lap-Shoulder Belt 3. Pick up the latch plate and pull the belt across you. Don’t let it get twisted. The driver has a lap-shoulder belt. Here’s how to wear it The shoulder belt may lock if you pull the belt properly.
Page 36 5. To make the lap part tight, pull down on the buckle The lap part of the belt should be worn low and snug on end of the belt as you pull up on the shoulder belt. the hips, just touching the thighs. In a crash, this applies force to the strong pelvic bones.
Page 37 What’s wrong with this? CAUTION: You can be seriously hurt if your shoulder belt is too loose. In a crash, you would move forward too much, which could increase injury. The shoulder belt should ﬁt against your body. The shoulder belt is too loose. It won’t give nearly as much protection this way.
Page 38 What’s wrong with this? CAUTION: You can be seriously injured if your belt is buckled in the wrong place like this. In a crash, the belt would go up over your abdomen. The belt forces would be there, not at the pelvic bones.
Page 39 What’s wrong with this? CAUTION: You can be seriously injured if your belt goes over an armrest like this. The belt would be much too high. In a crash, you can slide under the belt. The belt force would then be applied at the abdomen, not at the pelvic bones, and that could cause serious or fatal injuries.
Page 40 What’s wrong with this? CAUTION: You can be seriously injured if you wear the shoulder belt under your arm. In a crash, your body would move too far forward, which would increase the chance of head and neck injury. Also, the belt would apply too much force to the ribs, which aren’t as strong as shoulder bones.
Page 41 What’s wrong with this? CAUTION: You can be seriously injured by a twisted belt. In a crash, you wouldn’t have the full width of the belt to spread impact forces. If a belt is twisted, make it straight so it can work properly, or ask your dealer to ﬁx it.
Page 42: Safety Belt Use During Pregnancy
Safety Belt Use During Pregnancy Safety belts work for everyone, including pregnant women. Like all occupants, they are more likely to be seriously injured if they don’t wear safety belts. To unlatch the belt, just push the button on the buckle. The belt should go back out of the way.
Page 43: Center Passenger Position
The best way to protect the fetus is to protect the Center Passenger Position mother. When a safety belt is worn properly, it’s more likely that the fetus won’t be hurt in a crash. For pregnant women, as for anyone, the key to making safety belts effective is wearing them properly.
Page 44: Lap Belt
Lap Belt When you sit in a center seating position other than in the second row you have a lap belt. To make the belt shorter, pull its free end as shown until the belt is snug. Buckle, position and release it the same way as the lap part of a lap-shoulder belt.
Page 45: Rear Seat Passengers
Rear Seat Passengers Rear Seat Outside Passenger Positions It is very important for rear seat passengers to buckle up! Accident statistics show that unbelted people in the rear seat are hurt more often in crashes than those who are wearing safety belts. Rear passengers who are not safety belted can be thrown out of the vehicle in a crash.
Page 46 Lap-Shoulder Belt If the belt is not long enough, see Safety Belt Extender on page 1-44. Here is how to wear a lap-shoulder belt properly. Make sure the release button on the buckle is positioned so you would be able to unbuckle the safety belt quickly if you ever had to.
Page 47 CAUTION: You can be seriously hurt if your shoulder belt is too loose. In a crash, you would move forward too much, which could increase injury. The shoulder belt should ﬁt against your body. The lap part of the belt should be worn low and snug on the hips, just touching the thighs.
Page 48 Rear Safety Belt Comfort Guides for Children and Small Adults Rear shoulder belt comfort guides will provide added safety belt comfort for older children who have outgrown booster seats and for small adults. When installed on a shoulder belt, the comfort guide better positions the belt away from the neck and head.
Page 49 Second Row Seat 3. Be sure that the belt is not twisted and it lies ﬂat. The guide must be on top of the belt. 1-43...
Page 50: Safety Belt Extender
Safety Belt Extender If the vehicle’s safety belt will fasten around you, you should use it. But if a safety belt isn’t long enough to fasten, your dealer will order you an extender. It’s free. When you go in to order it, take the heaviest coat you will wear, so the extender will be long enough for you.
Page 51: Child Restraints
Child Restraints What is the proper way to wear safety belts? If possible, an older child should wear a Older Children lap-shoulder belt and get the additional restraint a shoulder belt can provide. The shoulder belt should not cross the face or neck. The lap belt should ﬁt snugly below the hips, just touching the top of the thighs.
Page 52 What if a child is wearing a lap-shoulder belt, but the child is so small that the shoulder belt is very close to the child’s face or neck? If the child is sitting in a rear seat outside position, move the child toward the center of the vehicle. If the child is sitting in the second row center position, move the child toward the safety belt buckle.
Page 53 CAUTION: Never do this. Here a child is sitting in a seat that has a lap-shoulder belt, but the shoulder part is behind the child. If the child wears the belt in this way, in a crash the child might slide under the belt.
Page 54: Infants And Young Children
Infants and Young Children Everyone in a vehicle needs protection! This includes infants and all other children. Neither the distance traveled nor the age and size of the traveler changes the need, for everyone, to use safety restraints. In fact, the law in every state in the United States and in every Canadian province says children up to some age must be restrained while in a vehicle.
Page 55 CAUTION: (Continued) CAUTION: For example, in a crash at only 25 mph Children who are up against, or very close to, (40 km/h), a 12-lb. (5.5 kg) baby will suddenly any air bag when it inﬂates can be seriously become a 240-lb. (110 kg) force on a person’s injured or killed.
Page 56 What are the different types of add-on child restraints? CAUTION: Add-on child restraints, which are purchased by the vehicle’s owner, are available in four basic Newborn infants need complete support, types. Selection of a particular restraint should take including support for the head and neck. This into consideration not only the child’s weight, is necessary because a newborn infant’s neck height, and age but also whether or not the...
Page 57: Child Restraint Systems
Child Restraint Systems CAUTION: The body structure of a young child is quite unlike that of an adult or older child, for whom the safety belts are designed. A young child’s hip bones are still so small that the vehicle’s regular safety belt may not remain low on the hip bones, as it should.
Page 58 A rear-facing infant seat (B) provides restraint with the A forward-facing child seat (C-E) provides restraint for seating surface against the back of the infant. The the child’s body with the harness and also sometimes harness system holds the infant in place and, in a crash, with surfaces such as T-shaped or shelf-like shields.
Page 59 How do child restraints work? A child restraint system is any device designed for use in a motor vehicle to restrain, seat, or position children. A built-in child restraint system is a permanent part of the motor vehicle. An add-on child restraint system is a portable one, which is purchased by the vehicle’s owner.
Page 60: Where To Put The Restraint
When choosing a child restraint, be sure the child Where to Put the Restraint restraint is designed to be used in a vehicle. If it is, it Accident statistics show that children are safer if they will have a label saying that it meets federal motor are restrained in the rear rather than the front seat.
Page 61: Top Strap
Do not use child restraints in the center front seat position. The restraints will not work properly. CAUTION: (Continued) Wherever you install it, be sure to secure the child restraint properly. Even though the passenger sensing system is Keep in mind that an unsecured child restraint can designed to turn off the passenger’s frontal air move around in a collision or sudden stop and injure bag if the system detects a rear-facing child...
Page 62 Anchor the top strap to one of the following anchor points. Be sure to use an anchor point located on the same side of the vehicle as the seating position where the child restraint will be placed. If you have an adjustable head restraint, route the top strap under it.
Page 63: Top Strap Anchor Location
Top Strap Anchor Location Anchor the top strap to this bracket. Once you have the top strap anchored, you’ll be ready to secure the child restraint itself. Yukon/Yukon XL models without rear seats: Top strap anchor loops are located at the bottom rear of the Yukon/Yukon XL models with rear seats: A child front seat cushion for the right front passenger’s position.
Page 64 Yukon XL Second Row Seat, Bucket Seats Similar Third Row Bench Seat Yukon models: A child restraint with a top strap should only be used in the second or third row. Don’t use a child restraint with a top strap in the right front passenger’s position, because there’s no place to anchor the top strap.
Page 65 Third Row 50/50 Split Bench Seat Yukon Second Row Seat 1-59...
Page 66 Lower Anchorages and Top Tethers This system, designed to make installation of child restraints easier, does not use the vehicle’s safety belts. for Children (LATCH System) Instead, it uses vehicle anchors (A, B) and child restraint attachments to secure the restraints. Some restraints also use another vehicle anchor to secure a top tether strap (C).
Page 67 CAUTION: If a LATCH-type child restraint is not attached to its anchorage points, the restraint will not be able to protect the child correctly. In a crash, the child could be seriously injured or killed. Make sure that a LATCH-type child restraint is properly installed using the anchorage points, or use the vehicle’s safety belts to secure the restraint, following the...
Page 68: Securing A Child Restraint Designed For The Latch System
Securing a Child Restraint Designed Securing a Child Restraint in a Rear for the LATCH System Outside Seat Position 1. Find the LATCH anchorages for the seating position you want to use, where the bottom of the seatback meets the back of the seat cushion. 2.
Page 69 If your child restraint is equipped with the LATCH system see Lower Anchorages and Top Tethers for Children (LATCH System) on page 1-60. See Top Strap on page 1-55 if the child restraint has one. There is no top strap anchor at the third row driver side seating position.
Page 70 4. Pull the rest of the shoulder belt all the way out of 5. To tighten the belt, feed the shoulder belt back into the retractor to set the lock. the retractor while you push down on the child restraint. If you’re using a forward-facing child restraint, you may ﬁnd it helpful to use your knee to push down on the child restraint as you tighten the belt.
Page 71: Second Row
Securing a Child Restraint in a If your child restraint is equipped with the LATCH system, see Lower Anchorages and Top Tethers for Center Rear Seat Position Children (LATCH System) on page 1-60. See Top Strap on page 1-55 if the child restraint has one. Second Row The center seat position in the second row has a lap-shoulder belt which works the same way as the...
Page 72 1. Make the belt as long as possible by tilting the latch 4. Buckle the belt. Make sure the release button is plate and pulling it along the belt. positioned so you would be able to unbuckle the safety belt quickly if you ever had to. 2.
Page 73 5. To tighten the belt, pull its free end while you push Securing a Child Restraint in the down on the child restraint. If you’re using a Center Front Seat Position forward-facing child restraint, you may ﬁnd it helpful to use your knee to push down on the child restraint as you tighten the belt.
Page 74: Securing A Child Restraint In The Right Front Seat Position
Securing a Child Restraint in the Your vehicle has a right front passenger air bag. A rear seat is a safer place to secure a forward-facing child Right Front Seat Position restraint. See Where to Put the Restraint on page 1-54. In addition, your vehicle may have the passenger sensing system.
Page 75 If you need to secure a forward-facing child restraint in the right front seat position, move the seat as far CAUTION: back as it will go before securing the forward-facing child restraint. See Power Seats on page 1-4 or Manual Seats on page 1-3.
Page 76 2. Put the child restraint on the seat. 3. Pick up the latch plate, and run the lap and shoulder portions of the vehicle’s safety belt through or around the restraint. The child restraint instructions will show you how. 5. Pull the rest of the shoulder belt all the way out of the retractor to set the lock.
Page 77 7. Push and pull the child restraint in different directions to be sure it is secure. 8. If your vehicle has the passenger sensing system and the air bag is off, the off indicator will be lit and stay lit in the inside rearview mirror when the key is turned to RUN or START.
Page 78: Air Bag Systems
Air Bag Systems Frontal air bags are designed to help reduce the risk of injury from the force of an inﬂating frontal air bag. But these air bags must inﬂate very quickly to do their This part explains the frontal and side impact air bag job and comply with federal regulations.
Page 79 CAUTION: (Continued) CAUTION: And, for some unrestrained occupants, frontal Both frontal and side impact air bags inﬂate air bags may provide less protection in frontal with great force, faster than the blink of an crashes than more forceful air bags have eye.
Page 80 There is an air bag readiness light on the CAUTION: instrument panel cluster, which shows the air Anyone who is up against, or very close to, bag symbol. any air bag when it inﬂates can be seriously injured or killed. Air bags plus lap-shoulder belts offer the best protection for adults, but not for young children and infants.
Page 81: Where Are The Air Bags
Where Are the Air Bags? The right front passernger’s frontal air bag is in the instrument panel on the passenger’s side. The driver’s frontal air bag is in the middle of the steering wheel. 1-75...
Page 82 If your vehicle has one, the driver’s side impact air bag is If your vehicle has one, the right front passenger’s side in the side of the driver’s seatback closest to the door. impact air bag is in the side of the passenger’s seatback closest to the door.
Page 83: When Should An Air Bag Inﬂate
When Should an Air Bag Inﬂate? CAUTION: Frontal Air Bags The driver’s and right front passenger’s frontal air bags If something is between an occupant and an are designed to inﬂate in moderate to severe frontal air bag, the bag might not inﬂate properly or it or near-frontal crashes.
Page 84: Side Impact Air Bags
Seat Position Sensors Air Bag Systems Vehicles with dual stage air bags are also equipped with In any particular crash, no one can say whether an air special sensors which enable the sensing system to bag should have inﬂated simply because of the damage monitor the position of both the driver and passenger to a vehicle or because of what the repair costs were.
Page 85: What Makes An Air Bag Inﬂate
What Makes an Air Bag Inﬂate? How Does an Air Bag Restrain? In an impact of sufficient severity, the air bag sensing In moderate to severe frontal or near frontal collisions, system detects that the vehicle is in a crash. For both even belted occupants can contact the steering wheel or frontal and side impact air bags, the sensing system the instrument panel.
Page 86: What Will You See After An Air Bag Inﬂates
What Will You See After an Air Bag CAUTION: Inﬂates? After the air bag inﬂates, it quickly deﬂates, so quickly When an air bag inﬂates, there is dust in the that some people may not even realize the air bag air.
Page 87 In many crashes severe enough to inﬂate an air bag, • Let only qualiﬁed technicians work on your air bag windshields are broken by vehicle deformation. systems. Improper service can mean that an air Additional windshield breakage may also occur from the bag system won’t work properly.
Page 88: Passenger Sensing System
Passenger Sensing System The passenger sensing system will turn off the right front passenger’s frontal air bag under certain conditions. The driver’s air bag and the side air bags If your rearview mirror has one of the indicators pictured are not part of the passenger sensing system. in the following illustrations, your vehicle has a passenger sensing system.
Page 89 The passenger sensing system is designed to turn off the right front passenger’s frontal air bag if: CAUTION: • the right front passenger seat is unoccupied • the system determines that an infant is present in a A child in a rear-facing child restraint can be rear-facing infant seat seriously injured or killed if the right front •...
Page 90 When the passenger sensing system has turned off the The passenger sensing system is designed to enable passenger’s frontal air bag, the off indicator will light (may inﬂate) the right front passenger’s frontal air and stay lit to remind you that the air bag is off. bag anytime the system senses that a person of adult size is sitting properly in the right front passenger’s seat.
Page 91 CAUTION: (Continued) If this ever happens, have the vehicle serviced promptly, because an adult-size person sitting in the right front passenger’s seat may not have the protection of the frontal air bag. See “Air Bag Readiness Light” in the Index for more on this, including important safety information.
Page 92: Servicing Your Air Bag-Equipped Vehicle
Servicing Your Air Bag-Equipped Adding Equipment to Your Air Vehicle Bag-Equipped Vehicle Air bags affect how your vehicle should be serviced. There air bag system parts in several places around Is there anything I might add to the front or your vehicle.
Page 93: Restraint System Check
Restraint System Check Because I have a disability, I have to get my vehicle modiﬁed. How can I ﬁnd out whether this will affect my advanced air bag system? Checking Your Restraint Systems Changing or moving any parts of the front seats, Now and then, make sure the safety belt reminder light safety belts, the air bag sensing and diagnostic and all your belts, buckles, latch plates, retractors...
Page 94: Replacing Restraint System Parts After A Crash
Replacing Restraint System Parts If you’ve had a crash, do you need new belts or LATCH system parts? After a Crash After a very minor collision, nothing may be necessary. But if the belts were stretched, as they would be if worn during a more severe crash, then you need new CAUTION: parts.
Page 95: Table Of Contents
Section 2 Features and Controls Keys ...............2-3 Automatic Transmission Operation ....2-24 Remote Keyless Entry System ......2-4 Four-Wheel Drive ..........2-28 ® Remote Keyless Entry System Operation ...2-5 All-Wheel Drive with Stabilitrak ......2-33 Parking Brake ..........2-37 Doors and Locks ..........2-8 Shifting Into Park (P) ........2-38 Door Locks ............2-8 Shifting Out of Park (P) .........2-41 Power Door Locks ..........2-9...
Page 96: Features And Controls
Section 2 Features and Controls ® OnStar System ..........2-53 Luggage Carrier ...........2-60 Rear Storage Area ........2-62 ® HomeLink Transmitter ........2-55 Convenience Net ..........2-62 ® Programming the HomeLink Transmitter ..2-56 Cargo Cover ..........2-62 Storage Areas ..........2-60 Sunroof ............2-63 Glove Box ...........2-60 Cupholder(s) ..........2-60 Vehicle Personalization ........2-64 Front Storage Area ........2-60...
Page 97 Keys CAUTION: Leaving children in a vehicle with the ignition key is dangerous for many reasons. They could operate the power windows or other controls or even make the vehicle move. The children or others could be badly injured or even killed.
Page 98: Remote Keyless Entry System
Your vehicle has one Remote Keyless Entry System double-sided key for the ignition and all door Your keyless entry system operates on a radio locks as well as the spare frequency subject to Federal Communications tire hoist lock, if equipped. Commission (FCC) Rules and with Industry Canada.
Page 99 At times you may notice a decrease in range. This is Remote Keyless Entry System normal for any remote keyless entry system. If the Operation transmitter does not work or if you have to stand closer to your vehicle for the transmitter to work, try this: If your vehicle has this feature, you can lock and unlock •...
Page 100: Battery Replacement
Remote Alarm Battery Replacement When the panic button with the horn symbol on the Under normal use, the battery in your remote keyless keyless entry transmitter is pressed, the horn will sound entry transmitter should last about two years. and the headlamps and taillamps will ﬂash for up to You can tell the battery is weak if the transmitter won’t 30 seconds.
Page 101 Resynchronization Resynchronization may be necessary due to the security method used by this system. The transmitter does not send the same signal twice to the receiver. The receiver will not respond to a signal that has been sent previously. This prevents anyone from recording and playing back the signal from the transmitter.
Page 102: Door Locks
Doors and Locks There are several ways to lock and unlock your vehicle. You can use the keyless entry system, if equipped, or you can also use your key. Door Locks To lock the door from the inside, slide the lever rearward.
Page 103: Power Door Locks
Power Door Locks If your vehicle has this power door lock switch, press the bottom of If your vehicle is equipped the switch on either front with power door locks, door to lock all the doors press the raised side of the at once.
Page 104: Programmable Automatic Door Locks
Delayed Locking Programmable Automatic Door Locks When you lock the doors using the power lock switch or the remote keyless entry transmitter with any door or Your vehicle is equipped with an automatic lock/unlock the liftgate open three chimes will signal that delayed feature which enables you to program your vehicle’s locking is being used.
Page 105 To enter the program mode, do the following: Programmable Unlocking Feature 1. Begin with the ignition off. Then pull the turn The following is the list of available programming signal/multifunction lever toward you and hold options: it there while you perform the next step. Mode 1: Driver’s door unlocks when the transmission is 2.
Page 106: Rear Door Security Locks
3. You are now ready to program the automatic door This feature is located on locks. Select one of the four programming options the inside edge of the listed previously, and press the unlock side of rear doors. the power door lock switch to cycle through the unlocking options.
Page 107: Lockout Protection
Lockout Protection CAUTION: (Continued) This feature protects you from locking your key in the vehicle when the key is in the ignition and a door If you must drive with the liftgate glass, liftgate is open. or rear doors open or if electrical wiring or If the power lock switch is pressed when a door is open other cable connections must pass through and the key is in the ignition, all of the doors will lock...
Page 108: Liftgate Glass And Liftgate
Liftgate Glass and Liftgate Panel Doors To open a mechanical lock system from the outside, To open the rear panel doors, you must open the insert the key into the lock and turn it counterclockwise passenger’s side panel door ﬁrst. If the door is locked, to unlock the glass and liftgate.
Page 109 Windows CAUTION: Leaving children, helpless adults, or pets in a vehicle with the windows closed is dangerous. They can be overcome by the extreme heat and suffer permanent injuries or even death from heat stroke. Never leave a child, a helpless adult, or a pet alone in a vehicle, especially with the windows closed in warm or hot weather.
Page 110: Manual Windows
Manual Windows The driver’s door has a switch for the passenger’s windows as well. Your power windows will work when the ignition has been turned to ACCESSORY or RUN or Turn the hand crank on each door to manually raise or when Retained Accessory Power (RAP) is active.
Page 111: Sun Visors
Lock-Out Switch Sun Visors If you have power windows, the driver’s door power To block out glare, you can swing down the top and window switch has a lock-out feature. The lock-out bottom visors (if equipped). You can also swing switch is located in front of the power window switches.
Page 112 Theft-Deterrent Systems 2. Lock the door with the power door lock switch or the remote keyless entry transmitter. The security light should come on and ﬂash. If using the Vehicle theft is big business, especially in some cities. remote keyless entry transmitter, the door does not Although your vehicle has a number of theft-deterrent need to be open.
Page 113: Testing The Alarm
Here’s how to avoid setting off the alarm by accident: Testing the Alarm • If you don’t want to activate the theft-deterrent The alarm can be tested by following these steps: system, the vehicle should be locked with the door 1.
Page 114 ® Passlock Starting and Operating Your Vehicle Your vehicle is equipped with the ® Passlock theft-deterrent system. ® Passlock is a passive theft-deterrent system. New Vehicle Break-In ® Passlock enables fuel if the ignition lock cylinder is turned with a valid key. If a correct key is not used or the Notice: Your vehicle does not need an elaborate ignition lock cylinder is tampered with, fuel is disabled.
Page 115: Ignition Positions
Ignition Positions B (ACCESSORY): This position lets you use things like the radio, power windows and the windshield wipers when the engine is off. With the key in the ignition switch, you can turn the key to four different positions. Notice: If your key seems stuck in LOCK and you can not turn it, be sure you are using the correct key;...
Page 116: Starting Your Engine
Starting Your Engine When starting your engine in very cold weather (below 0°F or 18°C), do this: Move your shift lever to PARK (P) or NEUTRAL (N). 1. With your foot off the accelerator pedal, turn the Your engine won’t start in any other position – that’s a ignition key to START and hold it there up to safety feature.
Page 117: Adjustable Throttle And Brake Pedal
Adjustable Throttle and Brake Pedal Engine Coolant Heater If your vehicle is equipped with this feature, you can In very cold weather, change the position of the throttle and brake pedals. 0°F ( 18°C) or colder, the This feature is designed for shorter drivers, since engine coolant heater can the pedals can not move farther away from the standard help.
Page 118: To Use The Engine Coolant Heater
To Use the Engine Coolant Heater 4. Before starting the engine, be sure to unplug and store the cord as it was before to keep it away 1. Turn off the engine. from moving engine parts. If you don’t, it could be damaged.
Page 119 CAUTION: CAUTION: It is dangerous to get out of your vehicle if the If you have four-wheel drive, your vehicle will shift lever is not fully in PARK (P) with the be free to roll — even if your shift lever is in parking brake ﬁrmly set.
Page 120 NEUTRAL (N): In this position, your engine doesn’t Notice: Shifting out of PARK (P) or NEUTRAL (N) connect with the wheels. To restart when you’re already with the engine running at high speed may damage moving, use NEUTRAL (N) only. Also, use the transmission.
Page 121 THIRD (3): This position is also used for normal driving, FIRST (1): This position gives you even more power however it offers more power and lower fuel economy (but lower fuel economy) than SECOND (2). You than DRIVE (D). can use it on very steep hills, or in deep snow or mud. If the shift lever is put in FIRST (1) while the vehicle SECOND (2): This position gives you more power but is moving forward, the transmission won’t shift into ﬁrst...
Page 122 Tow/Haul Mode When Tow/Haul mode is selected the Tow/Haul indicator light will illuminate. The Tow/Haul mode also interacts with the Autoride™ feature, if your vehicle is so equipped, to enhance the ride when trailering or with a loaded vehicle. See Autoride™...
Page 123: Front Axle Locking Feature
Front Axle Locking Feature The transfer case buttons are located to the left of The front axle locks and unlocks automatically when the instrument panel you shift the transfer case. Some delay for the axle to cluster. lock or unlock is normal. Automatic Transfer Case CAUTION: Shifting the transfer case to NEUTRAL can...
Page 124 NEUTRAL (N): Shift the vehicle’s transfer case to (4HI): Use the 4HI position when you need extra NEUTRAL only when towing your vehicle. See traction, such as on snowy or icy roads or in most Recreational Vehicle Towing on page 4-53 or Towing off-road situations.
Page 125 Shifting into 4HI or AUTO 4WD Notice: Shifting the transmission into gear before the 4LO indicator light has stopped ﬂashing Press and release the 4HI or AUTO 4WD button. This could damage the transfer case. To help avoid can be done at any speed (except when shifting damaging your vehicle, always wait for the 4LO from 4LO), and the indicator light will ﬂash while shifting.
Page 126 Shifting Out of 4LO Shifting into NEUTRAL To shift from 4LO to 4HI, AUTO 4WD or 2HI your vehicle To shift the transfer case to NEUTRAL do the following: must be stopped or moving less than 3 mph (4.8 km/h) 1.
Page 127: All-Wheel Drive With Stabilitrak
® Shifting Out of NEUTRAL All-Wheel Drive with Stabilitrak To shift out of NEUTRAL: With this feature, engine power is sent to all four wheels 1. Set the parking brake and apply the regular brake all the time. pedal. This is like four-wheel drive, but there is no separate 2.
Page 128 You can choose among three driving settings: NEUTRAL: Shift the vehicle’s transfer case to NEUTRAL only when towing your vehicle. See ® (Stabilitrak ): This button is used with the Recreational Vehicle Towing on page 4-53 or Towing ® Stabilitrak system and is also used to shift the transfer Your Vehicle on page 4-53 for more information.
Page 129 Shifting into 4LO Shifting Out of 4LO To shift to the 4LO position, the ignition must be in RUN To shift from 4LO to All-Wheel Drive your vehicle must be and the vehicle must be stopped or moving less than stopped or moving less than 3 mph (4.8 km/h) with the 3 mph (4.8 km/h) with the transmission in NEUTRAL (N).
Page 130 Shifting into NEUTRAL Shifting Out of NEUTRAL To shift the transfer case to NEUTRAL do the following: To shift out of NEUTRAL: 1. Set the parking brake and apply the regular brake 1. Make sure the vehicle is parked so that it will pedal.
Page 131: Parking Brake
Parking Brake To release the parking brake, hold the regular brake pedal down. Pull the bottom edge of the lever, located above the parking brake pedal, with the parking To set the parking brake, hold the regular brake pedal brake symbol, to release the parking brake. down with your right foot.
Page 132: Shifting Into Park (P)
Shifting Into Park (P) CAUTION: (Continued) CAUTION: With four-wheel drive, if your transfer case is in NEUTRAL, your vehicle will be free to roll, even if your shift lever is in PARK (P). So, be It can be dangerous to get out of your vehicle sure the transfer case is in a drive gear —...
Page 133 1. Hold the brake pedal down with your right foot and set the parking brake. 2. Move the shift lever into the PARK (P) position like this: • Move the lever up as far as it will go. 3. Be sure the transfer case is in a drive gear – not in NEUTRAL (N).
Page 134: Torque Lock
Leaving Your Vehicle With the Engine If you have to leave your vehicle with the engine running, be sure your vehicle is in PARK (P) and the Running parking brake is ﬁrmly set before you leave it. After you move the shift lever into PARK (P), hold the regular brake pedal down.
Page 135: Shifting Out Of Park (P)
Shifting Out of Park (P) Parking Over Things That Burn Your vehicle has an automatic transmission shift lock control system which locks the shift lever in PARK when the ignition is in the LOCK position. You have to fully apply your regular brakes before you can shift from PARK (P) when the ignition is in RUN.
Page 136: Engine Exhaust
Engine Exhaust Running Your Engine While You Are Parked CAUTION: It is better not to park with the engine running. But if you ever have to, here are some things to know. Engine exhaust can kill. It contains the gas carbon monoxide (CO), which you can not see CAUTION: or smell.
Page 137: Mirrors
CAUTION: CAUTION: It can be dangerous to get out of your vehicle Four-wheel drive vehicles with the transfer if the shift lever is not fully in PARK (P) with case in NEUTRAL will allow the vehicle to roll, the parking brake ﬁrmly set. Your vehicle can even if your shift lever is in PARK (P).
Page 138: Automatic Dimming Rearview Mirror With Onstar , Compass And Temperature Display
Automatic Dimming Rearview Mirror Temperature and Compass Display ® with OnStar , Compass and Press the on/off button, located to the far left, brieﬂy to turn the compass/temperature display on or off. Temperature Display If the display reads CAL, you will need to calibrate the Your vehicle may have this feature.
Page 139: Automatic Dimming Mirror Operation
Automatic Dimming Mirror Operation The automatic dimming mirror function is turned on automatically each time the ignition is started. To operate the automatic dimming mirror, do the following: 1. Make sure the green indicator light, located to the left of the on/off button, is lit. If it’s not, press and hold the on/off button for approximately six seconds until the green light comes on, indicating that the mirror is in automatic dimming mode.
Page 140: Automatic Dimming Rearview Mirror With Compass And Temperature Display
Compass Calibration Passenger Air Bag Indicator Your vehicle may be equipped with a passenger air bag The compass may need calibration if one of the indicator, on the mirror glass, just above the buttons. following occurs: If your vehicle has this feature, the mirror will display the •...
Page 141: Compass Operation
Temperature Display Compass Operation Press the COMP button once brieﬂy to turn the compass The temperature can be displayed by pressing the on or off. TEMP button. Pressing the TEMP button once brieﬂy, will toggle the temperature reading on and off. To When the ignition and the compass feature are on, the alternate the temperature reading between Fahrenheit compass will show two character boxes for...
Page 142 Compass Variance The mirror is set in zone eight upon leaving the factory. It will be necessary to adjust the compass to compensate for compass variance if you live outside zone eight. Under certain circumstances, as during a long distance cross-country trip, it will be necessary to adjust for compass variance.
Page 143: Outside Manual Mirrors
Passenger Air Bag Indicator Outside Camper-Type Mirrors Your mirror may be equipped with a passenger air bag indicator on the mirror glass, just above the buttons. If you have this feature the mirror will display the word ON, or an airbag symbol in Canada, when the passenger air bag is enabled.
Page 144: Outside Power Mirrors
Outside Power Mirrors Outside Power Camper-Type Mirror If your vehicle is equipped with outside power If your vehicle is equipped camper-type mirrors, they can be adjusted so you can with power outside mirrors, have a clear view of objects behind you. the controls are located on To extend the mirrors move the selector switch, located the driver’s door armrest.
Page 145: Outside Automatic Dimming Mirror
The mirrors may also include a memory function which Resetting the Power Foldaway Mirrors works in conjunction with the memory seats. See You will need to reset the power foldaway mirrors if the “Memory Seats” under Memory Seat on page 2-64 for following occurs: more information.
Page 146: Outside Curb View Assist Mirrors
Outside Curb View Assist Mirrors Outside Convex Mirror If your vehicle has the optional memory package Your passenger’s side mirror is convex. A convex you may have this feature. mirror’s surface is curved so you can see more from the driver’s seat.
Page 147: Onstar System
® ® OnStar System OnStar Services One of the following plans is normally included for a speciﬁc duration with each vehicle equipped with ® ® OnStar . You can upgrade or extend your OnStar service plan to meet your needs. Safe and Sound Plan •...
Page 148 ® Luxury and Leisure Plan OnStar Steering Wheel Controls • All Directions and Connections Plan services : If your vehicle is • Personal Concierge equipped with the steering ® wheel control buttons OnStar Personal Calling you can use them ® ®...
Page 149: Homelink Transmitter
® HomeLink Transmitter This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 150: Programming The Homelink Transmitter
® Programming the HomeLink Be sure that people and objects are clear of the garage door or gate operator you are programming. When Transmitter programming a garage door, it is advised to park outside of the garage. ® Do not use the HomeLink Transmitter with any garage It is recommended that a new battery be installed in door opener that does not have the “stop and reverse”...
Page 151 4. The indicator light will ﬂash slowly at ﬁrst and then 6. Locate in the garage, the garage door opener ® rapidly after HomeLink successfully receives the receiver (motor-head unit). Locate the “Learn” frequency signal from the hand-held transmitter. or “Smart” button. This can usually be found where Release both buttons.
Page 152: Gate Operator And Canadian Programming
® Gate Operator and Canadian Using HomeLink Programming ® Press and hold the appropriate HomeLink button for at least half of a second. The indicator light will come Canadian radio-frequency laws require transmitter on while the signal is being transmitted. signals to “time out”...
Page 153: Resetting Defaults
® Reprogramming a Single HomeLink Resetting Defaults Button ® To reset HomeLink to default settings do the following: ® ® To program a device to HomeLink using a HomeLink 1. Hold down the two outside buttons for about button previously trained, follow these steps: 20 seconds until the indicator light begins to ﬂash.
Page 154: Storage Areas
Storage Areas Center Console Storage Area Your vehicle may be equipped with a console Glove Box compartment between the bucket seats. To open it, press the button and swing the console To open your glove box, lift up the latch and pull the lid open.
Page 155 Don’t exceed the maximum vehicle capacity when • If you need to carry long items, move the crossrails loading your vehicle. For more information on vehicle as far apart as they will go. Tie the load to the capacity and loading, see Loading Your Vehicle , in the crossrails and the siderails or siderail supports.
Page 156: Rear Storage Area
Rear Storage Area Cargo Cover Your vehicle may have a storage compartment located Cargo Tie Downs in the rear cargo area of the vehicle in the driver’s side trim panel. Your vehicle may be To open the utility compartment, press in on the release equipped with cargo tie latch and swing the compartment door open.
Page 157: Sunroof
Sunroof The sunroof is also equipped with a sunshade which you can pull forward to block sun rays. The sunshade will not close when the sunroof is open. If a hand, arm, or other object is blocking the sunroof glass panel as it is closing, the glass panel will stop at the obstruction.
Page 158: Vehicle Personalization
Vehicle Personalization To store your memory seat, throttle and brake pedals, mirrors and radio presets, do the following: 1. Adjust the driver’s seat (including the seatback Memory Seat recliner, lumbar, and side wing area), throttle and brake pedals, both of the outside mirrors, and If your vehicle has this the radio station presets to your preference.
Page 159: Easy Exit Seat
The seat, throttle and brake pedals and mirror positions To store the seat exit position for driver 1 or 2, do the can also be recalled when placing the key in the following: ignition if programmed to do so through the Driver 1.
Page 160 NOTES 2-66...
Page 161 Section 3 Instrument Panel Instrument Panel Overview .......3-4 Battery Warning Light ........3-45 Hazard Warning Flashers ........3-6 Voltmeter Gage ..........3-45 Other Warning Devices ........3-7 Brake System Warning Light ......3-46 Horn .............3-7 Anti-Lock Brake System Warning Light .....3-47 Tilt Wheel .............3-7 Traction Off Light ..........3-48 Turn Signal/Multifunction Lever ......3-8 Engine Coolant Temperature Gage ....3-49 Exterior Lamps ..........3-15...
Page 162 Section 3 Instrument Panel Radio with Six-Disc CD ........3-108 Care of Your CDs and DVDs ......3-138 Rear Seat Entertainment System ....3-122 Care of Your CD and DVD Player ....3-139 Rear Seat Audio (RSA) ........3-134 Cleaning the Video Screen ......3-139 Theft-Deterrent Feature ........3-135 Fixed Mast Antenna ........3-139 Audio Steering Wheel Controls ......3-136 XM™...
Page 163 NOTES...
Page 164: Instrument Panel Overview
Instrument Panel Overview...
Page 165 A. Dome Lamp Override Button. See “Dome Lamps” K. Instrument Panel Fuse Block. See Fuses and Circuit under Interior Lamps on page 3-19. Breakers on page 5-113. B. Exterior Lamp Controls. See Exterior Lamps on L. Hood Release. See Hood Release on page 5-11. page 3-15.
Page 166: Hazard Warning Flashers
Hazard Warning Flashers The hazard warning ﬂasher is located at the top of the steering column. Your hazard warning ﬂashers work no matter what position your key is in, and even if the key isn’t in. Press the button to make the front and rear turn signal lamps ﬂash on and off.
Page 167: Other Warning Devices
Other Warning Devices The tilt steering wheel lever is located on the lower left side of the If you carry reﬂective triangles, you can use them to column. warn others. Set one up at the side of the road about 300 feet (100 m) behind your vehicle.
Page 168: Turn Signal/Multifunction Lever
Turn Signal/Multifunction Lever Turn and Lane Change Signals The turn signal has two upward (for right) and two downward (for left) positions. These positions allow you to signal a turn or a lane change. To signal a turn, move the lever all the way up or down. When the turn is ﬁnished, the lever will return automatically.
Page 169 Turn Signal On Chime Flash-to-Pass If your turn signal is left on for more than 3/4 of a mile This feature lets you use your high-beam headlamps to (1.2 km), a chime will sound at each ﬂash of the signal a driver in front of you that you want to pass. turn signal and the message TURN SIGNAL ON will It works even if your headlamps are in the automatic also appear in the DIC.
Page 170: Windshield Wipers
Windshield Wipers (Off): To stop the wipers, move the band to off. Be sure to clear ice and snow from the wiper blades You control the windshield wipers by turning the band before using them. If they’re frozen to the windshield, with the wiper symbol on it.
Page 171: Cruise Control
Rear Window Washer/Wiper Cruise Control This knob is located on the (Off): This position instrument panel to the left turns the system off. of the steering wheel. To turn the rear wiper on, turn the knob to either 1 or 2. (On): This position activates the system.
Page 172 With cruise control, you can maintain a speed of about Setting Cruise Control 25 mph (40 km/h) or more without keeping your foot on the accelerator. This can really help on long trips. Cruise control does not work at speeds below CAUTION: about 25 mph (40 km/h).
Page 173 Resuming a Set Speed Increasing Speed While Using Cruise Control Suppose you set your cruise control at a desired speed and then you apply the brake. This, of course, There are two ways to go to a higher speed: disengages the cruise control. But you don’t need to •...
Page 174 Reducing Speed While Using Cruise Ending Cruise Control Control There are four ways to turn off the cruise control: • Press in the button at the end of the lever until you • Step lightly on the brake pedal, reach the lower speed you want, then release it. •...
Page 175: Exterior Lamps
Exterior Lamps AUTO (Automatic): Turning the control to this position puts the system into automatic headlamp mode. (Parking Lamps): Turning the control to this position turns on the parking lamps, together with the following: • Sidemarker Lamps • Taillamps • License Plate Lamps •...
Page 176: Automatic Headlamp System
Automatic Headlamp System If you start your vehicle in a dark garage, the automatic headlamp system will come on immediately. Once When it is dark enough outside, your automatic you leave the garage, it will take approximately headlamp system will turn on your headlamps at the one minute for the automatic headlamp system to normal brightness along with other lamps such as change to DRL if it is bright enough outside.
Page 177: Lamps On Reminder
Lamps On Reminder When the DRL are on, only your DRL lamps will be on. The taillamps, sidemarker and other lamps won’t be A reminder chime will sound when your headlamps or on. The instrument panel won’t be lit up either. parking lamps are manually turned on and your When it begins to get dark, the automatic headlamp ignition is off, in LOCK, ACCESSORY, or your door is...
Page 178: Fog Lamps
Fog Lamps The fog lamps will be cancelled after the ignition is turned off. If you still want to use the fog lamps after you If your vehicle has fog lamps, use them for better vision restart the vehicle, you will need to press the fog in foggy or misty conditions.
Page 179: Interior Lamps
Interior Lamps Front Reading Lamps Instrument Panel Brightness The reading lamps are located on the overhead console. : This feature controls the brightness of the instrument panel lights. The thumbwheel for this feature is located next to the headlamp control. Turn the thumbwheel up to adjust the instrument panel lights.
Page 180: Dome Lamps
Dome Lamps The dome lamps will come on when you open a door. You can also turn the dome lamps on by turning the thumbwheel, located next to the exterior lamps control, all the way up. In this position, the dome lamps will remain on whether a door is opened or closed.
Page 181: Accessory Power Outlets
Accessory Power Outlets Notice: Improper use of the power outlet can cause damage not covered by your warranty. Do not hang any type of accessory or accessory bracket With accessory power outlets you can plug in auxiliary from the plug because the power outlets are electrical equipment such as a cellular telephone or designed for accessory power plugs only.
Page 182: Climate Controls
Climate Controls (Off): If the fan is off, outside air will still enter the vehicle, and will be directed based on the position of the mode knob. The temperature can also be adjusted Climate Control System using the temperature knob. Temperature Knob The middle knob on the control panel lets you select the temperature of the air ﬂowing into the passenger...
Page 183: Dual Climate Control System
Dual Climate Control System (Bi-Level): Air is delivered through the ﬂoor outlets as well as the instrument panel outlets. The ﬂow can With this system you can control the heating, cooling be divided between vent and ﬂoor outlets depending and ventilation for your vehicle. upon where the knob is placed between the settings.
Page 184 To change the current mode, select one of the following: Temperature Control Driver’s Side: The lever on the left side of the climate (Vent): This mode directs air to the instrument control panel is used to raise or lower the temperature panel vents.
Page 185: Defogging And Defrosting
Defogging and Defrosting Rear Window Defogger Fog on the inside of the windows is a result of high The lines you see on the rear window warm the glass. humidity (moisture) condensing on the cool window The rear window defogger uses a warming grid to glass.
Page 186 Outlet Adjustment Operation Tips • Keep the hood and front air inlets free of ice, snow, Use the air outlets located or any other obstruction (such as leaves). The in the center and on the heater and defroster will work far better, reducing side of your instrument the chance of fogging the inside of your windows.
Page 187: Dual Automatic Climate Control System
Dual Automatic Climate Control Driver’s Side Temperature Knob System The driver’s side knob is used to adjust the temperature of the air coming through the system on the driver’s With this system, you can control the heating, cooling side. The temperature can be adjusted even if the and ventilation in your vehicle.
Page 188 Turn the knob counterclockwise or clockwise to lower or If the driver and passenger’s temperature settings increase the cabin temperature. The display will show are not the same, the opposite side temperature the temperature setting decreasing or increasing and an setting will be displayed for an additional ﬁve arrow pointing to the passenger will be displayed seconds.
Page 189 Be careful not to cover the sensor located on the Manual Operation top of the instrument panel near the windshield. This You may manually adjust the air delivery mode or fan sensor regulates air temperature based on sun speed. load, and also turns on your headlamps. To avoid blowing cold air in cold weather, the system (Fan): The switch with the fan symbol allows will delay turning on the fan until warm air is...
Page 190 If you select recirculation while in defrost, defog or ﬂoor, (Panel): This setting will deliver air to the the light in the button will ﬂash and then go out to let you instrument panel outlets. know that this is not allowed. This is normal and helps to prevent fogging.
Page 191: Air Conditioning
Display Air Conditioning If you press the MODE button to select an air delivery (Air Conditioning): Press this button to turn the air mode, the display will change to show you the selected conditioning (A/C) compressor on and off. The snowﬂake air delivery mode.
Page 192 On hot days, open the windows long enough to let hot Defogging and Defrosting inside air escape. This reduces the time it takes for You can use either defog or front defrost to clear fog or your vehicle to cool down. Then keep your windows frost from your windshield.
Page 193: Outlet Adjustment
Rear Window Defogger Outlet Adjustment If your vehicle has this feature, the lines you see on the Use the air outlets located rear window warm the glass. The rear window in the center and on the defogger uses a warming grid to remove fog from the side of your instrument rear window.
Page 194: Rear Air Conditioning System
Operation Tips Rear Air Conditioning System • Keep the hood and front air inlets free of ice, snow, If your vehicle is equipped with the optional rear air or any other obstruction (such as leaves). The conditioner it has two rear air conditioning fan speed heater and defroster will work far better, reducing selectors.
Page 195: Rear Air Conditioning And Heating System
The knob has three speed positions. To increase the Rear Air Conditioning and Heating ﬂow of cooled air, turn the knob clockwise. To decrease System the ﬂow of cooled air, turn it counterclockwise. To turn the fan off, turn the knob to the off position. If your vehicle is equipped with this system, there are To operate the rear system using the front control, just two rear heat and air conditioning controls.
Page 196 Fan Knob (Bi-Level): Air is delivered through the ﬂoor outlets as well as the headliner outlets. The ﬂow can be The fan knob on the left side of the control panel divided between vent and ﬂoor outlets depending upon adjusts the fan speed. To increase airﬂow, turn the knob where the knob is placed between the settings.
Page 197 Fan Knob Mode Knob The fan knob on the left side of the control panel The right knob on the control panel allows you to adjusts the fan speed. To increase airﬂow, turn the knob choose the direction of air delivery. clockwise.
Page 198: Rear Air Conditioning And Heating System And Electronic Climate Controls
Rear Air Conditioning and Heating AUX: Turn the knob, located on the left side of the control panel, to this position to allow the rear seat System and Electronic Climate passengers to have control over the rear climate control system. See “Rear Passenger Console Control” later Controls for more information.
Page 199 Rear Passenger Console Control (Mode): Press this button to select the air delivery mode and AUTO mode. Choose AUTO if you want To control the rear climate control from the rear the system to automatically regulate the airﬂow. passenger seat position, use the rear passenger console See “Auto Mode”...
Page 200: Warning Lights, Gages And Indicators
Warning Lights, Gages and Gages can indicate when there may be or is a problem with one of your vehicle’s functions. Often gages Indicators and warning lights work together to let you know when there’s a problem with your vehicle. When one of the warning lights comes on and stays on Warning Lights, Gages, and when you are driving, or when one of the gages shows...
Page 201: Instrument Panel Cluster
Instrument Panel Cluster United States Heavy Duty Transmission version shown. Canada and Light Duty Transmission Clusters similar. Your instrument cluster is designed to let you know at a glance how your vehicle is running. You’ll know how fast you’re going, about how much fuel you have and many other things you’ll need to know to drive safely and economically.
Page 202: Speedometer And Odometer
Speedometer and Odometer Tachometer Your speedometer lets you see your speed in both Your tachometer displays the engine speed in miles per hour (mph) and kilometers per hour (km/h). revolutions per minute (rpm). Your odometer shows how far your vehicle has been driven, in either miles (used in the United States) Safety Belt Reminder Light or kilometers (used in Canada).
Page 203: Air Bag Readiness Light
Air Bag Readiness Light Passenger Air Bag Status Indicator There is an air bag readiness light on the instrument If your vehicle has the passenger sensing system panel cluster, which shows the air bag symbol. your rearview mirror will have a passenger air bag status The system checks the air bag’s electrical system for indicator.
Page 204 If the word ON or the on symbol is lit on the passenger If the word OFF or the off symbol is lit on the air bag air bag status indicator, it means that the right front status indicator, it means that the passenger sensing passenger’s frontal air bag is enabled (may inﬂate).
Page 205: Battery Warning Light
Battery Warning Light Voltmeter Gage If this light is displayed When your engine is not when the engine is running, but the ignition is running, you may have a in RUN, this gage problem with your charging shows your battery’s state system.
Page 206: Brake System Warning Light
You can only drive for a short time with the reading in either warning zone. If you must drive, turn off all unnecessary accessories. Readings in either warning zone indicate a possible problem in the electrical system. Have the vehicle serviced as soon as possible.
Page 207: Anti-Lock Brake System Warning Light
Anti-Lock Brake System Warning CAUTION: Light With the anti-lock brake Your brake system may not be working system, this light will come properly if the brake system warning light is on when you start your on. Driving with the brake system warning light engine and may stay on for on can lead to an accident.
Page 208: Traction Off Light
Traction Off Light • If you move the shift lever to FIRST (1), the light will come on and stay on to indicate that the traction system is off. This is normal operation. To If you have the Traction turn the system back on, move the shift lever Assist System, this light back to a position other than FIRST (1);...
Page 209: Engine Coolant Temperature Gage
Engine Coolant Temperature Gage Transmission Temperature Gage United States Canada United States Canada This gage shows the engine coolant temperature. Your vehicle may be equipped with a transmission temperature gage. It also provides an indicator of how hard your vehicle is working.
Page 210 See Driver Information Center (DIC) on page 3-58 for The following situations can cause the transmission to further information. operate at higher temperatures: • Towing a trailer If the transmission ﬂuid reaches temperatures of approximately 275°F (135°C) or greater, the Driver •...
Page 211: Tire Pressure Light
Tire Pressure Light Malfunction Indicator Lamp Check Engine Light If your vehicle is equipped with the Tire Pressure Monitor system, this light Your vehicle is equipped will come on if the with a computer which system detects low tire monitors operation of the pressure.
Page 212 The Check Engine light comes on to indicate that there This light should come on, as a check to show you it is is a problem and service is required. Malfunctions working, when the ignition is on and the engine is often will be indicated by the system before any problem not running.
Page 213: If The Light Is Flashing
If the Light is Flashing If the Light Is On Steady The following may prevent more serious damage to You may be able to correct the emission system your vehicle: malfunction by considering the following: • Reducing vehicle speed. Did you recently put fuel into your vehicle? •...
Page 214 Have you recently changed brands of fuel? Emissions Inspection and Maintenance Programs If so, be sure to fuel your vehicle with quality fuel. See Gasoline Octane on page 5-4. Poor fuel quality will Some state/provincial and local governments have or cause your engine not to run as efficiently as designed.
Page 215: Oil Pressure Gage
Oil Pressure Gage CAUTION: Do not keep driving if the oil pressure is low. If you do, your engine can become so hot that it catches ﬁre. You or others could be burned. Check your oil as soon as possible and have your vehicle serviced.
Page 216: Cruise Control Light
Cruise Control Light Tow/Haul Mode Light The cruise light comes on This light is displayed whenever you set your when the Tow/Haul mode cruise control. See “Cruise has been activated. Control” under Turn Signal/Multifunction Lever on page 3-8. For more information, see Towing a Trailer on Four-Wheel-Drive Light page 4-63.
Page 217: Fuel Gage
Fuel Gage Here are some situations you may experience with your fuel gage. None of these indicate a problem with the fuel gage. • At the gas station, the fuel pump shuts off before the gage reads full. • It takes a little more or less fuel to ﬁll up than the fuel gage indicated.
Page 218: Driver Information Center (Dic)
Driver Information Center (DIC) D (Select): This button resets certain functions and turns off or acknowledges messages on the DIC. The DIC display is located on the instrument panel If your vehicle is not equipped with the DIC steering cluster above the steering wheel. The DIC can display wheel buttons you will not have all of the features listed information such as the trip odometer, fuel economy and above, and you will turn off, or acknowledge DIC...
Page 219: Trip Information Button
Trip Information Button • PERSONAL: XXX.X AVG MPH — This shows the vehicle’s average speed for the personal trip. Press the trip information button to scroll through the • PERSONAL: % ANNUAL — This shows the ratio of ODOMETER, PERSONAL TRIP ON/OFF, BUSINESS personal trip miles to annual miles as a percent.
Page 220 To reset personal or business trip information press and Annual Log hold the select button for approximately one second Press the trip information button to scroll to the annual while in one of the personal or business trip modes. This log.
Page 221: Fuel Information Button
Fuel Information Button Average Fuel Economy Press the fuel information button until AVG ECON Use the fuel information button to scroll through the appears in the display. Average fuel economy is how range, average fuel economy, instant fuel economy and many miles per gallon your vehicle is getting based on the GM Oil Life System.
Page 222: Personalization Button
GM Oil Life System Personalization Button You can program certain features to a preferred setting Press the fuel information button until ENGINE OIL LIFE for up to two people. Press the personalization button appears in the display. The GM Oil Life System shows to scroll through the following personalization features.
Page 223 The default options for the above features were set ALARM WARNING: LAMPS: The headlamps will ﬂash when your vehicle left the factory. The default options when the alarm is active. are noted in the text following, but may have been Choose one of the four options and press the changed from their default state since then.
Page 224 LOCK DOORS OUT OF PARK (default): The doors UNLOCK DOORS MANUALLY: The doors will not be will lock when the vehicle is shifted out of PARK (P). unlocked automatically. Choose one of the three options and press the UNLOCK DRIVER IN PARK: The driver’s door will be personalization button while it is displayed on the DIC to unlocked when the vehicle is shifted into PARK (P).
Page 225 Press the personalization button until DELAYED Seat Position Recall LOCKING appears in the display. To select your Press the personalization button until SEAT POSITION personalization for delayed locking, press the select RECALL appears in the display. To select your button while DELAYED LOCKING is displayed on the personalization for seat position recall, press the select DIC.
Page 226 Perimeter Lighting Remote Lock Feedback Press the personalization button until PERIMETER Press the personalization button until REMOTE LOCK LIGHTING appears in the display. To select your FEEDBACK appears in the display. To select your personalization for perimeter lighting, press the select personalization for the feedback you will receive when button while PERIMETER LIGHTING is displayed on the locking the vehicle with the remote keyless entry...
Page 227 Remote Unlock Feedback Headlamps On At Exit Press the personalization button until REMOTE Press the personalization button until HEADLAMPS ON UNLOCK FEEDBACK appears in the display. To select AT EXIT appears in the display. To select your your personalization for the feedback you will receive personalization for how long the headlamps will stay on when unlocking the vehicle with the remote keyless when you turn off the vehicle, press the select button...
Page 228 Curb View Assist Easy Exit Driver Seat Press the personalization button until CURB VIEW Press the personalization button until EASY EXIT ASSIST appears in the display. To select your DRIVER SEAT appears in the display. To select your personalization for curb view assist, press the select personalization for seat position exit, press the button while CURB VIEW ASSIST is displayed on select button while EASY EXIT DRIVER SEAT is...
Page 229: Select Button
Display Units (ENG/MET) Choose one of the three options and press the personalization button while it is displayed on the DIC to Press the personalization button until DISPLAY UNITS select it. appears in the display. To select English or metric, If you accidentally choose a language that you don’t press the select button while DISPLAY UNITS is want or understand, press and hold the personalization...
Page 230: Dic Warnings And Messages
DIC Warnings and Messages BUCKLE SEATBELT If your vehicle is equipped with the passenger sensing Warning messages are displayed on the DIC to notify system, this message reminds you to buckle the the driver that the status of the vehicle has changed and driver’s and/or passenger’s seatbelt.
Page 231: Change Engine Oil
CHANGE ENGINE OIL CHECK WASHER FLUID This message is displayed when the engine oil needs to If the washer ﬂuid level is low, this message will appear be changed. on the DIC. Press the select button to acknowledge the message and clear it from the DIC display. When you change the engine oil, be sure to reset the The message will clear itself after 10 seconds, or until CHANGE ENGINE OIL message.
Page 232: Engine Overheated
ENGINE OVERHEATED LEFT REAR DOOR AJAR If the engine cooling system reaches unsafe If the driver’s side rear door is not fully closed, this temperatures for operation, this message will appear in message will appear on the display and you will hear a the DIC and you will hear a chime.
Page 233: Passenger Door Ajar
PASSENGER DOOR AJAR REPLACE LIFTGATE FUSE If the passenger’s door is not fully closed, this message This message will be displayed if the liftgate lock will appear on the display and you will hear a chime. malfunctions and/or the liftgate fuse blows. For more Stop and turn off the vehicle, check the door for information on fuses, see Fuses and Circuit Breakers on obstacles, and close the door again.
Page 234: Service Brake System
SERVICE BRAKE SYSTEM or appears again when you begin driving, the four wheel drive system needs service. Press the select button to If there is a problem with the brake system, this acknowledge the message. message will be displayed on the DIC. If this message SERVICE RIDE CONTROL appears, stop as soon as possible and turn off the vehicle.
Page 235: Service Tire Monitor
SERVICE TIRE MONITOR STABILITY SYS DISABLED If your vehicle is equipped with the tire pressure monitor The STABILITY SYS DISABLED message will turn on ® system, this message will be displayed if one or more of when you press the Stabilitrak button, or when the the tire monitor sensors have malfunctioned, or if all of stability control has been automatically disabled.
Page 236: Tighten Fuel Cap
TIGHTEN FUEL CAP Notice: If you drive your vehicle while the transmission ﬂuid is overheating and the If the vehicle’s fuel cap is not tightened properly this transmission temperature warning is displayed on message may appear along with the check engine light the instrument panel cluster and/or DIC, you on the instrument panel.
Page 237: Traction Sys Limited
TRACTION SYS LIMITED So, before adding sound equipment, check with your dealer and be sure to check federal rules If the brake traction control system activates constantly covering mobile radio and telephone units. or if the brakes have heated up due to high-speed Your audio system has been designed to operate easily braking, brake traction-control will be disabled and the and to give years of listening pleasure.
Page 238: Setting The Time For Radios With Radio Data Systems (Rds)
Setting the Time for Radios with AM-FM Radio Radio Data Systems (RDS) Your radio may have a button marked with an H or HR to represent hours and an M or MN to represent minutes. Press and hold the hour button until the correct hour appears on the display.
Page 239: Finding A Station
Finding a Station Setting Preset Stations The six numbered pushbuttons let you return to your AM FM: Press this button to switch between FM1, FM2, favorite stations. You can set up to 18 stations (six FM1, or AM. The display will show your selection. six FM2, and six AM) by performing the following steps: TUNE: Turn this knob to select radio stations.
Page 240: Radio Messages
Setting the Tone (Bass/Treble) To adjust balance or fade to the middle position, select BAL or FAD. Then press and hold AUDIO for more than AUDIO: To adjust bass and treble, press and release two seconds until you hear a beep. L and a zero or F and AUDIO until BAS or TRE appears on the display.
Page 241: Radio With Cd
Radio with CD Radio Data System (RDS) Your audio system is equipped with a Radio Data System (RDS). RDS features are available for use only on FM stations that broadcast RDS information. With RDS, your radio can do the following: •...
Page 242: Contiguous Us States
XM™ Satellite Radio Service Set the volume at the desired level. Press this button to select LOW, MEDIUM, or HIGH. AVOL will appear (48 Contiguous US States) on the display. Each higher setting will provide more volume compensation as vehicle speed increases. XM™...
Page 243 Finding a Station Setting Preset Stations The six numbered pushbuttons let you return to your BAND: Press this button to switch between FM1, FM2, favorite stations. You can set up to 30 stations (six FM1, AM, or XM1 or XM2 (48 contiguous US states, if six FM2, and six AM, six XM1 and six XM2 (48 equipped).
Page 244 Setting the Tone (Bass/Treble) Adjusting the Speakers (Balance/Fade) AUDIO: Push and release the AUDIO knob until BASS AUDIO: To adjust the balance to the right and the or TREB appears on the display. Turn the knob to left speakers, push and release the AUDIO knob until increase or to decrease.
Page 245: Rds And Xm
Finding a Program Type (PTY) Station SCAN: You can scan the stations within a PTY by performing the following: (RDS and XM™) 1. Turn the P-TYPE knob to activate program type To select and ﬁnd a desired PTY perform the following: select mode.
Page 246: Rds Messages
Setting Preset PTYs (RDS Only) RDS Messages The six numbered pushbuttons let you return to your ALERT!: Alert warns of local or national emergencies. favorite PTYs. These buttons have factory PTY presets. When an alert announcement comes on the current You can set up to 12 PTYs (six FM1 and six FM2) by radio station, ALERT! will appear on the display.
Page 247 When a message is not available from a station, Your radio will play the traffic announcement even if the NO INFO will appear on the display. volume is low. Your radio will interrupt the play of a CD if the last tuned station broadcasts traffic TRAF (Traffic): If TRAF appears on the display, the announcements.
Page 248 XM™ Radio Messages Radio Display Condition Action Required Message XL (Explicit Language XL on the radio display, These channels, or any others, can be blocked at a Channels) after the channel name, customer’s request, by calling 1-800-852-XMXM (9696). indicates content with explicit language.
Page 249 XM™ Radio Messages (cont’d) Radio Display Condition Action Required Message No Info Category Name not No category information is available at this time on this available channel. Your system is working properly. No Info No Text/Informational No text or informational messages are available at this message available time on this channel.
Page 250: Playing A Cd
Playing a CD Do not add paper labels to CDs, they could get caught in the CD player. Insert a CD partway into the slot, label side up. The Do not play 3 inch CDs without a standard adapter CD. player will pull it in and the CD should begin playing.
Page 251 4 FWD (Forward): Press and hold this pushbutton to DISPL (Display): Press this knob to see how long the advance quickly within a track. Press and hold this current track has been playing. ET and the elapsed pushbutton for less than two seconds to advance at six time of the track will appear on the display.
Page 252: Radio With Cassette And Cd
CD Messages Radio with Cassette and CD If the CD comes out, it could be for one of the following reasons: • It is very hot. When the temperature returns to normal, the CD should play. • You are driving on a very rough road. When the road becomes smoother, the CD should play.
Page 253 Radio Data System (RDS) XM™ Satellite Radio Service (48 Contiguous US States) Your audio system is equipped with a Radio Data System (RDS). RDS features are available for use only XM™ is a continental U.S. based satellite radio service on FM stations that broadcast RDS information. that offers 100 coast to coast channels including music, news, sports, talk, and children’s programming.
Page 254 DISPL (Display): Press this knob to switch the display Finding a Station between the radio station frequency and the time. Time display is available with the ignition turned off. BAND: Press this button to switch between FM1, FM2, AM, or XM1 or XM2 (48 contiguous US states, if For RDS, press the DISPL knob to change what appears equipped).
Page 255 Setting Preset Stations Setting the Tone (Bass/Treble) The six numbered pushbuttons let you return to your AUDIO: Push and release the AUDIO knob until BASS favorite stations. You can set up to 30 stations (six FM1, or TREB appears on the display. Turn the knob to six FM2, and six AM, or six XM1 and six XM2 (48 increase or to decrease.
Page 256 Adjusting the Speakers (Balance/Fade) Finding a Program Type (PTY) Station (RDS and XM™) AUDIO: To adjust the balance between the right and the left speakers, push and release the AUDIO To select and ﬁnd a desired PTY perform the following: knob until BAL appears on the display.
Page 257 SCAN: You can scan the stations within a PTY by Setting Preset PTYs (RDS Only) performing the following: The six numbered pushbuttons let you return to your 1. Turn the P-TYPE knob to activate program type favorite PTYs. These buttons have factory PTY presets. select mode.
Page 258 RDS Messages If the whole message is not displayed, parts of the message will appear every three seconds. To scroll through the message at your own speed, press ALERT!: Alert warns of local or national emergencies. the INFO button repeatedly. A new group of words will When an alert announcement comes on the current appear on the display with each press.
Page 259 If the current tuned station does not broadcast traffic Radio Messages announcements, press this button and the radio will seek to a station that does. When the radio ﬁnds a CAL ERR (Calibration Error): Your audio system has station that broadcasts traffic announcements, it will been calibrated for your vehicle from the factory.
Page 260 XM™ Radio Messages Radio Display Condition Action Required Message XL (Explicit Language XL on the radio display, These channels, or any others, can be blocked at a Channels) after the channel name, customer’s request, by calling 1-800-852-XMXM (9696). indicates content with explicit language.
Page 261 XM™ Radio Messages (cont’d) Radio Display Condition Action Required Message No Info Category Name not No category information is available at this time on this available channel. Your system is working properly. No Info No Text/Informational No text or informational messages are available at this message available time on this channel.
Page 262: Playing A Cassette Tape
Playing a Cassette Tape 1 PREV (Previous): Your tape must have at least three seconds of silence between each selection for previous Your tape player is built to work best with tapes that are to work. Press this pushbutton to go to the previous up to 30 to 45 minutes long on each side.
Page 263 3 REV (Reverse): Press this pushbutton to reverse the SCAN : To scan the tape, press and hold either tape rapidly. Press this pushbutton again to return to SCAN arrow for more than two seconds until SCAN playing speed. The radio will play while the tape appears on the display and you hear a beep.
Page 264: Cassette Tape Messages
Cassette Tape Messages CD Adapter Kits It is possible to use a portable CD player with your CHK TAPE (Check Tape): If this message appears on cassette tape player after activating the bypass feature the display, the tape will not play because of one of on your tape player.
Page 265 Playing a CD Do not add paper labels to CDs, they could get caught in the CD player. Insert a CD partway into the slot, label side up. The Do not play 3 inch CDs without a standard adapter CD. player will pull it in and the CD should begin playing.
Page 266 4 FWD (Forward): Press and hold this pushbutton to DISPL (Display): Press this knob to see how long the advance quickly within a track. Press and hold this current track has been playing. ET and the elapsed pushbutton for less than two seconds to advance at six time of the track will appear on the display.
Page 267 CD Messages Listening to a DVD If the CD comes out, it could be for one of the following If your vehicle has the Rear Seat Entertainment (RSE) reasons: system and a DVD is playing, the DVD symbol will appear on the radio display indicating that the DVD is •...
Page 268: Radio With Six-Disc Cd
Radio with Six-Disc CD Radio Data System (RDS) Your audio system is equipped with a Radio Data System (RDS). RDS features are available for use only on FM stations that broadcast RDS information. With RDS, your radio can do the following: •...
Page 269 XM™ Satellite Radio Service Set the volume at the desired level. Press this button to select LOW, MEDIUM, or HIGH. AVOL will appear (48 Contiguous US States) on the display. Each higher setting will provide more volume compensation as vehicle speed increases. XM™...
Page 270 Finding a Station Setting Preset Stations The six numbered pushbuttons let you return to your BAND: Press this button to switch between FM1, FM2, favorite stations. You can set up to 30 stations (six FM1, AM, or XM1 or XM2 (48 contiguous US states, if six FM2, and six AM, six XM1 and six XM2 (48 equipped).
Page 271 Setting the Tone (Bass/Treble) Adjusting the Speakers (Balance/Fade) AUDIO: Push the AUDIO knob until BASS or TREB AUDIO: To adjust the balance between the right appears on the display. Turn the knob to increase or to and the left speakers, push the AUDIO knob until BAL decrease.
Page 272 Finding a Program Type (PTY) Station To use the PTY interrupt feature, press and hold the P-TYPE button until you hear a beep on the PTY (RDS and XM™) you want to interrupt with. When selected, an asterisk will appear beside that PTY on the display. You To select and ﬁnd a desired PTY perform the following: may select multiple interrupts if desired.
Page 273 BAND (Alternate Frequency): Alternate frequency 3. Turn the P-TYPE knob to select a PTY. allows the radio to switch to a stronger station with the 4. Press and hold one of the six numbered same program type. To turn alternate frequency on, pushbuttons until you hear a beep.
Page 274 INFO (Information): If the current station has a If the current tuned station does not broadcast traffic message, INFO will appear on the display. Press this announcements, press this button and the radio button to see the message. The message may display will seek to a station that does.
Page 275 XM™ Radio Messages Radio Display Condition Action Required Message XL (Explicit Language XL on the radio display, These channels, or any others, can be blocked at a Channels) after the channel name, customer’s request, by calling 1-800-852-XMXM (9696). indicates content with explicit language.
Page 276 XM™ Radio Messages (cont’d) Radio Display Condition Action Required Message No Info Category Name not No category information is available at this time on this available channel. Your system is working properly. No Info No Text/Informational No text or informational messages are available at this message available time on this channel.
Page 277 Playing a CD LOAD CD : Press the LOAD side of this button to load CDs into the CD player. This CD player will If you turn off the ignition or radio with the CD in the hold up to six CDs. player, it will stay in the player.
Page 278: Playing A Speciﬁc Loaded Cd
3. Once the light stops ﬂashing and turns green, load Playing a Speciﬁc Loaded CD a CD. Insert the CD partway into the slot, label side For every CD loaded, a number will appear on the up. The player will pull the CD in. display.
Page 279 Do not repeatedly press the CD eject button to eject a RPT (Repeat): With repeat, you can repeat one track CD after you have tried to push it in manually. The or an entire CD. To use repeat, do the following: receivers 25-second eject timer will reset at each press •...
Page 280: Using Song List Mode
AUTO EQ (Automatic Equalization): Press AUTO EQ RCL (Recall): Press this knob to see how long the to select the desired equalization setting while playing current track has been playing. To change the default a CD. The equalization will be automatically set on the display (track or elapsed time), press the whenever you play a CD.
Page 281 4. Press and hold the SONG LIST button to save the 4. Press and hold the SONG LIST button. When track into memory. When SONG LIST is pressed a SONG LIST is pressed, a beep will be heard beep will be heard immediately. After two seconds immediately.
Page 282: Rear Seat Entertainment System
CD Messages Listening to a DVD If your vehicle has Rear Seat Entertainment (RSE) CHECK CD: If this message appears on the display, it system and a DVD is playing, the DVD symbol will appear could be for one of the following reasons: on the radio display indicating that the DVD is available •...
Page 283: Dvd Player
DVD Player The DVD player is located in the overhead console. The DVD player can be controlled by the buttons on the DVD player or by the buttons on the remote control. See “Remote Control” later in this section for more information.
Page 284 Playing a Disc (Play/Pause): Press this button to start play of a DVD or CD. Press this button while a DVD or CD To play a disc, gently insert the disc with the label side is playing to pause it. Press this button again to continue up into the loading slot.
Page 285 Ejecting a Disc Region Code Error: This message will be displayed if the region code of the DVD is not compatible with Press the eject button on the DVD player to eject the region code of the DVD player. the disc. No Disc: This message will be displayed if any of the If a disc is ejected from the player, but is not removed, buttons on the DVD faceplate or remote control are...
Page 286: Remote Control
Video Screen Remote Control The video screen is located in the overhead console. To To use the remote control, aim it at the infrared window use the video screen, push forward on the release below the video screen and press the desired button. latch and the screen will fold down.
Page 287 Remote Control Buttons (Set-up Menu): Press this button to adjust the color, tint, brightness, contrast, and display mode (normal, full, or zoom). The dynamic range compression feature can be used to reduce loud audio and increase low audio produced by some DVDs. (Audio): Press this button to display a menu that will only appear when a DVD is being played.
Page 288 1 through 0 (Numeric Keypad): The remote control (Return): Press this button to exit the current numeric keypad provides you with the capability of direct active menu and return to the previous menu. This chapter, title, and track number selection. button will operate only when a DVD is being played and a menu is active.
Page 289 Slow Play: When the DVD is playing, press the pause Headphones button then press the fast forward button. The DVD The RSE system includes two sets of wireless will continue playing in a slow play mode. To cancel slow headphones. play mode, press the play/pause button.
Page 290: Stereo Rca Jacks
Battery Replacement Stereo RCA Jacks To change the batteries, do the following: The RCA jacks are located behind the video screen. The RCA jacks allow you to connect audio and 1. Loosen the screw on the battery compartment door video from an auxiliary device such as a camcorder or a located on the left side of the headphone earpiece.
Page 291: Audio Output
How to Change the Video Format when in The RSE system will always transmit the audio signal by infrared to the wireless headphones, if there is audio the Auxiliary Mode available. See “Headphones” previously for more The auxiliary input video format is preset to NTSC. In information.
Page 292 Problem Recommended Action Problem Recommended Action No power. The ignition might not be In auxiliary mode, the Check the auxiliary input in on or accessory. picture moves or scrolls. connections at both Check to make sure the devices. parental control button Change the Video has not been activated.
Page 293 Problem Recommended Action Problem Recommended Action After stopping the player, I If the stop button was Sometimes the wireless Check for obstructions, push Play but sometimes pressed one time, the headphone audio cuts out low batteries, reception the DVD starts where I DVD player will resume or buzzes.
Page 294: Rear Seat Audio (Rsa)
Rear Seat Audio (RSA) Rear Seat Audio Controls This feature allows rear seat passengers to listen to any of the audio sources: radio, cassette tapes, CDs, or DVDs, depending on your vehicles options. In the event that the front seat passengers are listening to any of these remote sources the rear seat passengers can only listen to the remote source being used by the front passengers or FM, AM, or the radios internal CD.
Page 295: Theft-Deterrent Feature
PROG (Program): The front passengers must be (Volume): Turn the knob to increase or to decrease listening to something different for each of these volume. The left knob controls the left headphone and functions to work: the right knob controls the right headphone. •...
Page 296: Audio Steering Wheel Controls
Audio Steering Wheel Controls PROG (Program): Press this button to play a station you have programmed on the radio preset pushbuttons on the selected band. You can control certain radio functions using the buttons on your steering wheel. If a cassette tape is playing, press this button to play the other side of the tape.
Page 297: Dvd Distortion
DVD Distortion XM™ Satellite Radio Service (48 Contiguous US States) You may experience audio distortion in the IR headphones when operating cellular phones, XM™ Satellite Radio gives you digital radio reception scanners, CB radios, Global Positioning Systems from coast to coast. Just as with FM, tall buildings (GPS)*, two-way radios, mobile fax, or walkie talkies.
Page 298: Care Of Your Cds And Dvds
For best results, use a scrubbing action, non-abrasive may not clean as thoroughly as the scrubbing type cleaning cassette with pads which scrub the tape cleaner. The use of a non-scrubbing action, dry-type head as the hubs of the cleaner cassette turn. The cleaning cassette is not recommended.
Page 299: Care Of Your Cd And Dvd Player
Care of Your CD and DVD Player XM™ Satellite Radio Antenna System (48 Contiguous US States) The use of CD lens cleaner discs is not advised, due to the risk of contaminating the lens of the CD optics Your XM™ Satellite Radio antenna is located on the roof with lubricants internal to the CD mechanism.
Page 300 NOTES 3-140...
Page 301 Section 4 Driving Your Vehicle Your Driving, the Road, and Your Vehicle ..4-2 City Driving ..........4-41 Defensive Driving ...........4-2 Freeway Driving ...........4-42 Drunken Driving ..........4-2 Before Leaving on a Long Trip .......4-43 Control of a Vehicle ........4-5 Highway Hypnosis ........4-44 Braking ............4-6 Hill and Mountain Roads ........4-44 Traction Assist System (TAS) ......4-9...
Page 302: Your Driving, The Road, And Your Vehicle
Your Driving, the Road, and Defensive driving requires that a driver concentrate on the driving task. Anything that distracts from the driving Your Vehicle task — such as concentrating on a cellular telephone call, reading, or reaching for something on the ﬂoor — makes proper defensive driving more difficult and can even Defensive Driving cause a collision, with resulting injury.
Page 303 Police records show that almost half of all motor According to the American Medical Association, a 180 lb vehicle-related deaths involve alcohol. In most cases, (82 kg) person who drinks three 12 ounce (355 ml) these deaths are the result of someone who was bottles of beer in an hour will end up with a BAC drinking and driving.
Page 304 It is the amount of alcohol that counts. For example, if But the ability to drive is affected well below a BAC of the same person drank three double martinis (3 ounces 0.10 percent. Research shows that the driving skills or 90 ml of liquor each) within an hour, the person’s of many people are impaired at a BAC approaching BAC would be close to 0.12 percent.
Page 305: Control Of A Vehicle
Control of a Vehicle CAUTION: You have three systems that make your vehicle go where you want it to go. They are the brakes, the steering and the accelerator. All three systems have to do their work at Drinking and then driving is very dangerous. the places where the tires meet the road.
Page 306: Braking
Braking Avoid needless heavy braking. Some people drive in spurts — heavy acceleration followed by heavy braking — rather than keeping pace with traffic. This is Braking action involves perception time and a mistake. Your brakes may not have time to cool reaction time.
Page 307: Anti-Lock Brake System
Anti-lock Brake System Your vehicle has anti-lock brakes. ABS is an advanced electronic braking system that will help prevent a braking skid. When you start your engine and begin to drive away, your anti-lock brake system will check itself. You may hear a momentary motor or clicking noise while this test is going on.
Page 308: Braking In Emergencies
The anti-lock system can change the brake pressure Remember: Anti-lock does not change the time you faster than any driver could. The computer is need to get your foot up to the brake pedal or always programmed to make the most of available tire and road decrease stopping distance.
Page 309: Traction Assist System (Tas)
Traction Assist System (TAS) If your vehicle is in cruise control when the TAS begins to limit wheel spin, the cruise control will automatically disengage. When road conditions allow you to safely Your vehicle may have a Traction Assist System (TAS) use it again, you may re-engage the cruise control.
Page 310 The traction off light will come on under the following The Traction Assist System, as delivered from the conditions: factory, will automatically come on whenever you start your vehicle. To limit wheel spin, especially in • The Traction Assist System is turned off, either by slippery road conditions, you should always leave the pressing the TAS on/off button or turning off the system on.
Page 311: Locking Rear Axle
® If desired, you can change the TAS automatic Stabilitrak System engagement feature so that the system will not come on automatically when the engine is started. To do so: Your vehicle may be equipped with the ® Stabilitrak system which combines antilock brake, 1.
Page 312: Traction Control Operation
® The STABILITY SYS ACTIVE message will appear on When the Stabilitrak system has been turned off you the Driver Information Center (DIC) only when the may still hear system noises as a result of the system is both on and activated. You may also feel or brake-traction control coming on.
Page 313 The traction control system is enabled automatically wheels. The system will return to normal operation after when you start your vehicle, and it will activate and the brakes have cooled. This can take up to two minutes display the TRACTION ACTIVE message in the Driver or longer depending on brake usage.
Page 314: Steering
Steering Suppose you are steering through a sharp curve. Then you suddenly accelerate. Both control systems — steering and acceleration — have to do Power Steering their work where the tires meet the road. Adding the sudden acceleration can demand too much of those If you lose power steering assist because the engine places.
Page 315: Steering In Emergencies
Steering in Emergencies There are times when steering can be more effective than braking. For example, you come over a hill and ﬁnd a truck stopped in your lane, or a car suddenly pulls out from nowhere, or a child darts out from between parked cars and stops right in front of you.
Page 316: Quadrasteer
QUADRASTEER™ The QUADRASTEER™ System has a control and diagnostic module that monitors and records current system status and operational information. If your vehicle is equipped with the 4 Wheel Steer system it has the ability to steer the vehicle with all four wheels.
Page 317 4: In this mode all four wheels will help steer the vehicle. If you want to use 4, and your vehicle is not in this mode, press the button, until the 4 indicator, located to the right of the 4 Wheel Steer button, comes on and stays on. If the 4 indicator is ﬂashing you will have to center the steering wheel by turning it to the left or right.
Page 318 Car Washes for QUADRASTEER™ (4 Wheel Steer tow mode): When towing a trailer the 4 wheel steer tow mode provides enhanced Equipped Vehicles stability allowing the trailer to follow the path of the tow vehicle more closely, especially during lane Notice: Because your vehicle has a wider rear changes.
Page 319: Off-Road Recovery
Off-Road Recovery Passing You may ﬁnd that your right wheels have dropped off The driver of a vehicle about to pass another on a the edge of a road onto the shoulder while you are two-lane highway waits for just the right moment, driving.
Page 320 • • Do not get too close to the vehicle you want to Check your mirrors, glance over your shoulder and pass while you are awaiting an opportunity. For one start your left lane change signal before moving out thing, following too closely reduces your area of of the right lane to pass.
Page 321: Loss Of Control
Loss of Control If you have the Traction Assist System, remember: It helps avoid only the acceleration skid. If you do not have this system, or if the system is off, then an acceleration Let us review what driving experts say about what skid is also best handled by easing your foot off the happens when the three control systems (brakes, accelerator pedal.
Page 322: Off-Road Driving
Off-Road Driving This off-road guide is for vehicles that have four-wheel drive or all-wheel drive. Also, see Braking on page 4-6. If your vehicle does not have four-wheel drive or all-wheel drive, you should not drive off-road unless you are on a level, solid surface. Off-road driving can be great fun.
Page 323 The following steps must be performed on each of the 3. Pull the push-pins and push-pins to remove the air dam: lower air dam assembly away from the 1. Insert a tool into the retainers until the lower push-pin slot and pull air dam is free.
Page 324: Before You Go Off-Roading
To reinstall the lower air dam do the following: Before You Go Off-Roading 1. Line up each push-pin There are some things to do before you go out. For with its intended example, be sure to have all necessary maintenance retainer and push the and service work done.
Page 325: Environmental Concerns
Environmental Concerns CAUTION: Off-road driving can provide wholesome and satisfying recreation. However, it also raises environmental concerns. We recognize these concerns and urge every • Cargo on the load ﬂoor piled higher than off-roader to follow these basic rules for protecting the seatbacks can be thrown forward the environment: during a sudden stop.
Page 326: Traveling To Remote Areas
Traveling to Remote Areas Controlling your vehicle is the key to successful off-road driving. One of the best ways to control your vehicle It makes sense to plan your trip, especially when going is to control your speed. Here are some things to keep to a remote area.
Page 327: Scanning The Terrain
Scanning the Terrain When you drive over obstacles or rough terrain, keep a ﬁrm grip on the steering wheel. Ruts, troughs or Off-road driving can take you over many different kinds of other surface features can jerk the wheel out of your terrain.
Page 328: Driving On Off-Road Hills
Driving on Off-Road Hills Approaching a Hill When you approach a hill, you need to decide if it is one Off-road driving often takes you up, down or across a of those hills that is just too steep to climb, descend or hill.
Page 329: Driving Uphill
Driving Uphill • Ease up on your speed as you approach the top of the hill. Once you decide you can safely drive up the hill, you • Attach a ﬂag to the vehicle to make you more need to take some special steps. visible to approaching traffic on trails or hills.
Page 330 • As you are backing down the hill, put your left hand What should I do if my vehicle stalls, or is about on the steering wheel at the 12 o’clock position. to stall, and I can not make it up the hill? This way, you will be able to tell if your wheels are If this happens, there are some things you should straight and maneuver as you back down.
Page 331: Driving Downhill
Suppose, after stalling, I try to back down the hill and decide I just can not do it. What should I do? CAUTION: Set the parking brake, put your transmission in PARK (P) and turn off the engine. Leave the Shifting the transfer case to NEUTRAL can vehicle and go get some help.
Page 332 If you decide you can go down a hill safely, then try to Are there some things I should not do when keep your vehicle headed straight down, and use a driving down a hill? low gear. This way, engine drag can help your brakes Yes! These are important because if you ignore and they will not have to do all the work.
Page 333: Driving Across An Incline
Driving Across an Incline For reasons like these, you need to decide carefully whether to try to drive across an incline. Just because the Sooner or later, an off-road trail will probably go across trail goes across the incline does not mean you have to the incline of a hill.
Page 334: Stalling On An Incline
Stalling on an Incline CAUTION: If your vehicle stalls when you are crossing an incline, be sure you (and your passengers) get out on the uphill side, even if the door there is harder to open. If you Getting out on the downhill (low) side of a get out on the downhill side and the vehicle starts to roll vehicle stopped across an incline is over, you will be right in its path.
Page 335: Driving In Water
Hard packed snow and ice offer the worst tire traction. If the water is not too deep, drive slowly through it. At On these surfaces, it is very easy to lose control. faster speeds, water splashes on your ignition On wet ice, for example, the traction is so poor that you system and your vehicle can stall.
Page 336: Driving At Night
After Off-Road Driving Driving at Night Remove any brush or debris that has collected on the underbody, chassis or under the hood. These accumulations can be a ﬁre hazard. After operation in mud or sand, have the brake linings cleaned and checked. These substances can cause glazing and uneven braking.
Page 337 Here are some tips on night driving. You can be temporarily blinded by approaching headlamps. It can take a second or two, or even several • Drive defensively. seconds, for your eyes to re-adjust to the dark. When • Do not drink and drive. you are faced with severe glare (as from a driver who does not lower the high beams, or a vehicle with •...
Page 338: Driving In Rain And On Wet Roads
Driving in Rain and on Wet Roads Rain and wet roads can mean driving trouble. On a wet road, you can not stop, accelerate or turn as well because your tire-to-road traction is not as good as on dry roads. And, if your tires do not have much tread left, you will get even less traction.
Page 339 CAUTION: Wet brakes can cause accidents. They will not work as well in a quick stop and may cause pulling to one side. You could lose control of the vehicle. After driving through a large puddle of water or a car wash, apply your brake pedal lightly until your brakes work normally.
Page 340: Driving Through Flowing Water
Hydroplaning Driving Through Flowing Water Hydroplaning is dangerous. So much water can build up under your tires that they can actually ride on the CAUTION: water. This can happen if the road is wet enough and you are going fast enough. When your vehicle is Flowing or rushing water creates strong forces.
Page 341: City Driving
City Driving Here are ways to increase your safety in city driving: • Know the best way to get to where you are going. Get a city map and plan your trip into an unknown part of the city just as you would for a cross-country trip.
Page 342: Freeway Driving
Freeway Driving The most important advice on freeway driving is: Keep up with traffic and keep to the right. Drive at the same speed most of the other drivers are driving. Too-fast or too-slow driving breaks a smooth traffic ﬂow. Treat the left lane on a freeway as a passing lane.
Page 343: Before Leaving On A Long Trip
Once you are moving on the freeway, make certain you Here are some things you can check before a trip: allow a reasonable following distance. Expect to • Windshield Washer Fluid: Is the reservoir full? Are move slightly slower at night. all windows clean inside and outside? When you want to leave the freeway, move to the •...
Page 344: Highway Hypnosis
Highway Hypnosis Hill and Mountain Roads Is there actually such a condition as “highway hypnosis”? Or is it just plain falling asleep at the wheel? Call it highway hypnosis, lack of awareness, or whatever. There is something about an easy stretch of road with the same scenery, along with the hum of the tires on the road, the drone of the engine, and the rush of the wind against the vehicle that can make you sleepy.
Page 345 If you drive regularly in steep country, or if you are planning to visit there, here are some tips that can make CAUTION: your trips safer and more enjoyable. See Off-Road Driving on page 4-22 for information about driving off-road. Coasting downhill in NEUTRAL (N) or with the ignition off is dangerous.
Page 346: Winter Driving
Winter Driving Here are some tips for winter driving: • Have your vehicle in good shape for winter. • You may want to put winter emergency supplies in your vehicle. Include an ice scraper, a small brush or broom, a supply of windshield washer ﬂuid, a rag, some winter outer clothing, a small shovel, a ﬂashlight, a red cloth and a couple of reﬂective warning triangles.
Page 347: Driving On Snow Or Ice
Driving on Snow or Ice What is the worst time for this? “Wet ice.” Very cold snow or ice can be slick and hard to drive on. But wet Most of the time, those places where your tires meet ice can be even more trouble because it may offer the road probably have good traction.
Page 348: If You Are Caught In A Blizzard
Your anti-lock brakes improve your vehicle’s stability If You Are Caught in a Blizzard when you make a hard stop on a slippery road. Even though you have an anti-lock braking system, you will want to begin stopping sooner than you would on dry pavement.
Page 349 • Put on extra clothing or wrap a blanket around you. If you have no blankets or extra clothing, make CAUTION: body insulators from newspapers, burlap bags, rags, ﬂoor mats — anything you can wrap around yourself or tuck under your clothing to keep warm. Snow can trap exhaust gases under your vehicle.
Page 350: If You Are Stuck: In Sand, Mud, Ice Or Snow
Then, shut the engine off and close the window almost all the way to preserve the heat. Start the engine CAUTION: again and repeat this only when you feel really uncomfortable from the cold. But do it as little as possible.
Page 351: Rocking Your Vehicle To Get It Out
Rocking Your Vehicle To Get It Out Using the Recovery Hooks First, turn your steering wheel left and right. That will clear the area around your front wheels. If you have a four-wheel-drive vehicle, shift into 4HI or 4LO. If your vehicle has the Traction Assist System, you should turn it off by pressing the TAS on/off button.
Page 352 CAUTION: These hooks, when used, are under a lot of force. Always pull the vehicle straight out. Never pull on the hooks at a sideways angle. The hooks could break off and you or others could be injured from the chain or cable snapping back.
Page 353: Towing
Towing Here are some important things to consider before you do recreational vehicle towing: • What’s the towing capacity of the towing vehicle? Towing Your Vehicle Be sure you read the tow vehicle manufacturer’s recommendations. Consult your dealer or a professional towing service if •...
Page 354: Dinghy Towing
Dinghy Towing Four-Wheel-Drive Vehicles (NR4 and NP8) Use the following procedure to tow your vehicle: 1. Shift the transmission to PARK (P). 2. Turn the engine off, but leave the ignition on. 3. Firmly set the parking brake. 4. Securely attach the vehicle being towed to the tow vehicle.
Page 355 Dolly Towing Two-Wheel-Drive Vehicles Two-wheel-drive vehicles should not be towed with all four wheels on the ground. Two-wheel-drive transmissions have no provisions for internal lubrication while being towed. Two-wheel-drive vehicles can be towed on a dolly with the front wheels on the ground provided that the wheels are straight and the steering column has been locked.
Page 356: Loading Your Vehicle
Loading Your Vehicle CAUTION: It is very important to know how much weight your vehicle can carry. This weight is called the vehicle capacity weight and includes the weight of all occupants, Shifting a four-wheel-drive vehicle’s transfer cargo and all nonfactory-installed options. Two labels case into NEUTRAL can cause your vehicle to on your vehicle show how much weight it may properly roll even if the transmission is in Park (P).
Page 357 Tire and Loading Information Label If your vehicle does not have the Tire and Loading Information label, the Certiﬁcation/Tire label shows the tire size and recommended inﬂation pressures needed to obtain the Gross Vehicle Weight Rating (GVWR) and the Gross Axle Weight Rating (GAWR) for the front and rear axles.
Page 358 6. If your vehicle will be towing a trailer, the load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle. See Towing a Trailer on page 4-63 for more information on towing a trailer, towing safety rules and trailering tips.
Page 359 Certiﬁcation/Tire Label Example 3 Loading Your Vehicle Item Description Total Vehicle Capacity Weight 1,000 lbs (453 kg) for Example 3 = The Certiﬁcation/Tire label is found on the rear edge of Subtract Occupant the driver’s door or in the Incomplete Vehicle Weight 200 lbs 1,000 lbs (453 kg) Document in the cab.
Page 360 The Certiﬁcation/Tire label also tells you the maximum weights for the front and rear axles, called Gross CAUTION: Axle Weight Rating (GAWR). To ﬁnd out the actual loads on your front and rear axles, you need to go to a weigh station and weigh your vehicle.
Page 361: Level Control
Level Control CAUTION: Automatic Level Control The automatic level control rear suspension is available Things you put inside your vehicle can strike on C/K 1500 vehicles and comes as a part of the and injure people in a sudden stop or turn, or Autoride™...
Page 362: Autoride
Autoride™ Trailer Recommendations If equipped, the Autoride™ feature will provide a You must subtract your hitch loads from the Cargo superior vehicle ride and handling under a variety of Weight Rating (CWR) for your vehicle. CWR is the passenger and loading conditions. maximum weight of the load your vehicle can carry.
Page 363: Towing A Trailer
Towing a Trailer If yours was built with trailering options, as many are, it’s ready for heavier trailers. But trailering is different than just driving your vehicle by itself. Trailering means changes in acceleration, braking, handling, durability CAUTION: and fuel economy. Successful, safe trailering takes correct equipment, and it has to be used properly.
Page 364 • Tow/Haul Mode Then, during the ﬁrst 500 miles (800 km) that you tow a trailer, don’t drive over 50 mph (80 km/h) Tow/Haul is a feature that assists when pulling a heavy and don’t make starts at full throttle. This helps your trailer or a large or heavy load.
Page 365: Weight Of The Trailer
Tow/Haul is designed to be most effective when the Weight of the Trailer vehicle and trailer combined weight is at least 75% of How heavy can a trailer safely be? the vehicle’s Gross Combined Weight Rating (GCWR). See Weight of the Trailer later in this section. It depends on how you plan to use your rig.
Page 366 Vehicle* Axle Ratio Maximum Trailer Weight GCWR C-1500 (2WD)* 3.42 5,700 lbs. (2 585 kg) 11,000 lbs. (4 990 kg) 4800 V8 3.73 6,700 lbs. (3 039 kg) 12,000 lbs. (5 443 kg) 3.42 6,700 lbs. (3 039 kg) 12,000 lbs. (5 443 kg) 5300 V8 3.73 7,700 lbs.
Page 367 Vehicle* Axle Ratio Maximum Trailer Weight GCWR C-2500 (2WD)* 6000 V8 (Extended 3.73 7,900 lbs. (3 583 kg) 14,000 lbs. (6 350 kg) Models)**† 4.10 9,900 lbs. (4 490 kg) 16,000 lbs. (7 257 kg)** 3.73 7,600 lbs. (3447 kg) 14,000 lbs.
Page 368: Weight Of The Trailer Tongue
The Gross Combination Weight Rating (GCWR) is the total allowable weight of the completely loaded vehicle and trailer including any passengers, cargo, equipment and conversions. The GCWR for your vehicle should not be exceeded. You can ask your dealer for our trailering information or advice, or you can write us at the address listed in your Warranty and Owner Assistance Information Booklet.
Page 369: Total Weight On Your Vehicle's Tires
Do not exceed the maximum allowable tongue weight Weight Distributing Hitches and Weight for your vehicle. Choose the shortest hitch extension Carrying Hitches that will position the hitch ball closest to the vehicle. This will help reduce the effect of trailer tongue weight on the rear axle.
Page 370: Trailer Brakes
If you will be pulling a trailer that, when loaded, will Trailer Brakes weigh more than 5,000 lbs (2 270 kg) be sure to use a If your trailer weighs more than 2,000 lbs. (900 kg) properly mounted weight-distributing hitch and sway loaded, then it needs its own brakes –...
Page 371: Driving With A Trailer
Driving with a Trailer Towing a trailer requires a certain amount of experience. Before setting out for the open road, you’ll want to get to know your rig. Acquaint yourself with the feel of handling and braking with the added weight of the trailer. CAUTION: And always keep in mind that the vehicle you are driving is now a good deal longer and not nearly as...
Page 372: Following Distance
Following Distance Making Turns Stay at least twice as far behind the vehicle ahead as Notice: Making very sharp turns while trailering you would when driving your vehicle without a trailer. could cause the trailer to come in contact with the This can help you avoid situations that require vehicle.
Page 373: Driving On Grades
Driving On Grades Parking on Hills Reduce speed and shift to a lower gear before you start down a long or steep downgrade. If you don’t shift CAUTION: down, you might have to use your brakes so much that they would get hot and no longer work well. You really should not park your vehicle, with a You can tow in DRIVE (D).
Page 374: Maintenance When Trailer Towing
5. If you have a four-wheel-drive vehicle, be sure the When You Are Ready to Leave After transfer case is in a drive gear and not in Parking on a Hill NEUTRAL. 1. Apply your regular brakes and hold the pedal down 6.
Page 375: Trailer Wiring Harness
Trailer Wiring Harness The seven-wire harness contains the following trailer circuits: Your vehicle is equipped with the following wiring • Yellow: Left Stop/Turn Signal harnesses for towing a trailer. • Dark Green: Right Stop/Turn Signal Basic Trailer Wiring • Brown: Taillamps •...
Page 376 Heavy-Duty Trailer Wiring Harness The seven-wire harness contains the following trailer circuits: Package • Yellow: Left Stop/Turn Signal • Dark Green: Right Stop/Turn Signal • Brown: Taillamps • White: Ground • Light Green: Back-up Lamps • Red: Battery Feed • Dark Blue: Trailer Brake If your trailer is equipped with electronic brakes, you can get a jumper harness (electric trailer brake control)
Page 377 Instrument Panel Jumper Wiring Harness CAUTION: Be sure to use only the correct trailer brake harness, the one intended for use on your vehicle. If you use some other trailer brake harness, even if it seems to ﬁt, your trailer brakes may not work at all.
Page 378 Four-Wire Harness Adapter This adapter is included with your vehicle as part of the heavy-duty trailer wiring package. Use this adapter to connect a standard four-way round Connect the adapter with the tab pointing up (see pin connector to the seven-wire harness on your vehicle. arrow).
Page 379: Power Winches
Power Winches If you will be using the bumper to tow a trailer, If you wish to use a power winch on your vehicle, only and your step-bumper has use it when your vehicle is stationary or anchored. three cutout circles you must push out the center Step-Bumper Pad cutout circle to install...
Page 380 NOTES 4-80...
Page 381 Section 5 Service and Appearance Care Service ............5-3 Cooling System ..........5-32 Doing Your Own Service Work ......5-3 Engine Fan Noise .........5-38 Adding Equipment to the Outside of Your Power Steering Fluid ........5-38 Vehicle ............5-4 Windshield Washer Fluid ........5-40 Brakes ............5-41 Fuel ..............5-4 Battery ............5-44 Gasoline Octane ..........5-4...
Page 382 Section 5 Service and Appearance Care Windshield Wiper Blade Replacement ....5-62 Weatherstrips ..........5-106 Cleaning the Outside of Your Vehicle .....5-107 Tires ..............5-63 Sheet Metal Damage ........5-109 Inﬂation - Tire Pressure .........5-72 Finish Damage ...........5-109 Tire Pressure Monitor System ......5-73 Underbody Maintenance .......5-109 Tire Inspection and Rotation ......5-76 Chemical Paint Spotting .......5-110 When It Is Time for New Tires .......5-77...
Page 383: Service
Service Doing Your Own Service Work If you want to do some of your own service work, you Your dealer knows your vehicle best and wants you to will want to use the proper service manual. It tells be happy with it. We hope you will go to your dealer you much more about how to service your vehicle than for all your service needs.
Page 384: Adding Equipment To The Outside Of Your Vehicle
Fuel CAUTION: (Continued) Gasoline • Be sure to use the proper nuts, bolts and The 8th digit of your vehicle identiﬁcation number (VIN) other fasteners. “English” and “metric” shows the code letter or number that identiﬁes your fasteners can be easily confused. If you engine.
Page 385: Gasoline Speciﬁcations
Gasoline Speciﬁcations California Fuel It is recommended that gasoline meet speciﬁcations If your vehicle is certiﬁed to meet California Emission which were developed by automobile manufacturers Standards (see the underhood emission control label), it around the world and contained in the World-Wide Fuel is designed to operate on fuels that meet California Charter which is available from the Alliance of speciﬁcations.
Page 386: Additives
Additives Some gasolines that are not reformulated for low emissions may contain an octane-enhancing additive called methylcyclopentadienyl manganese tricarbonyl To provide cleaner air, all gasolines in the United States (MMT); ask the attendant where you buy gasoline are now required to contain additives that will help whether the fuel contains MMT.
Page 387 Only vehicles that have the 5.3L V8 engine (VIN E-85 has less energy per gallon than gasoline, so you Code Z) may use 85% ethanol fuel (E-85). General will need to reﬁll your fuel tank more often when Motors encourages the use of E-85 in vehicles that are using E-85 than when you are using gasoline.
Page 388: Fuels In Foreign Countries
Fuels in Foreign Countries CAUTION: (Continued) If you plan on driving in another country outside the United States or Canada, the proper fuel may be hard Keep sparks, ﬂames and smoking materials to ﬁnd. Never use leaded gasoline or any other fuel away from fuel.
Page 389 CAUTION: CAUTION: If you spill fuel and then something ignites it, If a ﬁre starts while you are refueling, do not you could be badly burned. Fuel can spray out remove the nozzle. Shut off the ﬂow of fuel by on you if you open the fuel cap too quickly.
Page 390: Filling A Portable Fuel Container
Filling a Portable Fuel Container Checking Things Under the Hood CAUTION: CAUTION: Never ﬁll a portable fuel container while it is in your vehicle. Static electricity discharge from Things that burn can get on hot engine parts the container can ignite the gasoline vapor. and start a ﬁre.
Page 391: Hood Release
Hood Release To open the hood do the following: 1. Pull the handle inside the vehicle located under and to the left of the steering wheel. 2. Then go to the front of the vehicle and pull up on the secondary hood release located near the center of the grill.
Page 392: Engine Compartment Overview
Engine Compartment Overview When you open the hood on the VORTEC™ 5300 V8 engine (VORTEC™ 4800 and 6000 V8 engines similar), you’ll see the following: 5-12...
Page 393 A. Engine Air Cleaner/Filter. See Engine Air I. Power Steering Fluid Reservoir. See Power Steering Cleaner/Filter on page 5-21. Fluid on page 5-38. B. Coolant Surge Tank. See Cooling System on J. Remote Positive (+) Terminal. See Jump Starting on page 5-32.
Page 394 When you open the hood on the VORTEC™ 8100 V8 engine you’ll see the following: 5-14...
Page 395 A. Engine Air Cleaner/Filter. See Engine Air I. Remote Positive (+) Terminal. See Jump Starting on Cleaner/Filter on page 5-21. page 5-45. B. Coolant Surge Tank. See Cooling System on J. Power Steering Fluid Reservoir. See Power Steering page 5-32. Fluid on page 5-38.
Page 396: Engine Oil
Engine Oil If the CHECK OIL LEVEL message appears on the instrument cluster, it means you need to check your engine oil level right away. For more information, see “CHECK OIL LEVEL” under DIC Warnings and Messages on page 3-70. 8.1L Engine You should check your engine oil level regularly;...
Page 397: When To Add Engine Oil
When to Add Engine Oil See Engine Compartment Overview on page 5-12 for If the oil is at or below the cross-hatched area at the tip the location of the of the dipstick, then you will need to add at least one engine oil ﬁll cap.
Page 398 • SAE 5W-30 As shown in the viscosity chart, SAE 5W-30 is best for your vehicle. However, if it is going to be 0°F (–18°C) or above and SAE 5W-30 is not available, you may use SAE 10W-30. These numbers on an oil container show its viscosity, or thickness.
Page 399: Engine Oil Additives
Notice: Use only engine oil identiﬁed as meeting When to Change Engine Oil (GM Oil GM Standard GM6094M and showing the American Life System) Petroleum Institute Certiﬁed For Gasoline Engines starburst symbol. Failure to use the recommended Your vehicle has a computer system that lets you know oil can result in engine damage not covered by when to change the engine oil and ﬁlter.
Page 400: What To Do With Used Oil
How to Reset the CHANGE ENGINE OIL What to Do with Used Oil Message Used engine oil contains certain elements that may be The GM Oil Life System calculates when to change unhealthy for your skin and could even cause cancer. your engine oil and ﬁlter based on vehicle use.
Page 401: Engine Air Cleaner/Filter
Engine Air Cleaner/Filter How to Inspect Locate the ﬁlter change indicator. When the change See Engine Compartment indicator turns black or is in the red/orange “change” Overview on page 5-12 for zone, replace the ﬁlter and reset the indicator. To location of engine air inspect the air cleaner/ﬁlter, remove the ﬁlter from the cleaner/ﬁlter and change...
Page 402 CAUTION: Operating the engine with the air cleaner/ﬁlter off can cause you or others to be burned. The air cleaner not only cleans the air, it helps to stop ﬂame if the engine backﬁres. If it is not there and the engine backﬁres, you could be burned.
Page 403: Automatic Transmission Fluid
Automatic Transmission Fluid How to Check Because this operation can be a little difficult, you may When to Check and Change choose to have this done at the dealership service department. A good time to check your automatic transmission ﬂuid level is when the engine oil is changed.
Page 404 Get the vehicle warmed up by driving about 15 miles Then, without shutting off the engine, follow these steps: (24 km) when outside temperatures are above 50°F The transmission dipstick (10°C). If it’s colder than 50°F (10°C), drive the vehicle handle with the graphic is in THIRD (3) until the engine temperature gage located at the rear of...
Page 405: How To Add Fluid
How to Add Fluid Refer to the Maintenance Schedule to determine what kind of transmission ﬂuid to use. See Recommended Fluids and Lubricants on page 6-12. Add ﬂuid only after checking the transmission ﬂuid while it is hot. (A cold check is used only as a reference.) If the ﬂuid level is low, add only enough of the proper ﬂuid to bring the level up to the HOT area for a hot check.
Page 406: Engine Coolant
Engine Coolant What to Use Use a mixture of one-half clean, drinkable water and The cooling system in your vehicle is ﬁlled with ® one-half DEX-COOL coolant which won’t damage ® DEX-COOL engine coolant. This coolant is designed aluminum parts. If you use this coolant mixture, to remain in your vehicle for 5 years or 150,000 miles you don’t need to add anything else.
Page 407: Checking Coolant
Notice: If you use an improper coolant mixture, your engine could overheat and be badly damaged. CAUTION: The repair cost would not be covered by your warranty. Too much water in the mixture can freeze and crack the engine, radiator, heater core and Turning the surge tank pressure cap when the other parts.
Page 408: Coolant Surge Tank Pressure Cap
Adding Coolant Coolant Surge Tank Pressure Cap ® If you need more coolant, add the proper DEX-COOL See Engine Compartment coolant mixture at the surge tank, but only when the Overview on page 5-12 for engine is cool. more information on location.
Page 409: Engine Overheating
Engine Overheating This operating mode allows your vehicle to be driven to a safe place in an emergency. Driving extended miles (km) and/or towing a trailer in the overheat You will ﬁnd a coolant temperature gage on your protection mode should be avoided. vehicle’s instrument panel.
Page 410: If Steam Is Coming From Your Engine
If Steam Is Coming From Your Engine CAUTION: Steam from an overheated engine can burn you badly, even if you just open the hood. Stay away from the engine if you see or hear steam coming from it. Just turn it off and get everyone away from the vehicle until it cools down.
Page 411: If No Steam Is Coming From Your Engine
Notice: If your engine catches ﬁre because you If you get the overheat warning with no sign of steam, keep driving with no coolant, your vehicle can try this for a minute or so: be badly damaged. The costly repairs would not be 1.
Page 412: Cooling System
Cooling System When you decide it’s safe to lift the hood, here’s what you’ll see: All Other Engines A. Coolant Surge Tank B. Coolant Surge Tank Pressure Cap C. Engine Fan 8100 V8 Engines If the coolant inside the coolant surge tank is boiling, don’t do anything else until it cools down.
Page 413 The coolant level should If there seems to be no leak, start the engine again. be at or above the FULL The engine cooling fan speed should increase when idle COLD mark. If it isn’t, speed is doubled by pushing the accelerator pedal you may have a leak at the down.
Page 414: How To Add Coolant To The Coolant Surge Tank
How to Add Coolant to the Coolant CAUTION: (Continued) Surge Tank If you haven’t found a problem yet, check to see if coolant Never turn the cap when the cooling system, is visible in the surge tank. If coolant is visible but the including the coolant surge tank pressure cap, coolant level isn’t at or above the FULL COLD mark, add is hot.
Page 415 Notice: In cold weather, water can freeze and crack the engine, radiator, heater core and other parts. CAUTION: Use the recommended coolant and the proper coolant mixture. Adding only plain water to your cooling system can be dangerous. Plain water, or CAUTION: some other liquid such as alcohol, can boil before the proper coolant mixture will.
Page 416 1. Park the vehicle on a level surface. You can remove the coolant surge tank pressure cap when the cooling system, including the coolant surge tank pressure cap and upper radiator hose, is no longer hot. 2. Turn the pressure cap slowly counterclockwise (left) about one full turn.
Page 417 6. Then replace the pressure cap. Be sure the pressure cap is hand-tight and fully seated. 5. With the coolant surge tank pressure cap off, start the engine and let it run until you can feel the upper radiator hose getting hot. Watch out for the engine cooling fan.
Page 418: Engine Fan Noise
Engine Fan Noise Power Steering Fluid Your vehicle has a clutched engine cooling fan. When the clutch is engaged, the fan spins faster to provide more air to cool the engine. In most everyday driving conditions, the fan is spinning slower and the clutch is not fully engaged.
Page 419: How To Check Power Steering Fluid
How to Check Power Steering Fluid Turn the key off, let the engine compartment cool down, wipe the cap and the top of the reservoir clean, then unscrew the cap and wipe the dipstick with a clean rag. Replace the cap and completely tighten it. Then remove the cap again and look at the ﬂuid level on the dipstick.
Page 420: Windshield Washer Fluid
Windshield Washer Fluid Notice: • When using concentrated washer ﬂuid, follow the What to Use manufacturer’s instructions for adding water. • When you need windshield washer ﬂuid, be sure to read Do not mix water with ready-to-use washer ﬂuid. the manufacturer’s instructions before use. If you will be Water can cause the solution to freeze and operating your vehicle in an area where the temperature damage your washer ﬂuid tank and other parts of...
Page 421: Brakes
Brakes CAUTION: Brake Fluid Your brake master cylinder reservoir is ﬁlled with DOT-3 If you have too much brake ﬂuid, it can spill on brake ﬂuid. See Engine Compartment Overview on the engine. The ﬂuid will burn if the engine is page 5-12 for the location of the reservoir.
Page 422: Checking Brake Fluid
Checking Brake Fluid What to Add You can check the brake ﬂuid without taking off the cap. When you do need brake ﬂuid, use only DOT-3 brake ﬂuid. Use new brake ﬂuid from a sealed container only. See Recommended Fluids and Lubricants on page 6-12.
Page 423: Brake Wear
Notice: • Using the wrong ﬂuid can badly damage brake CAUTION: system parts. For example, just a few drops of mineral-based oil, such as engine oil, in your The brake wear warning sound means that brake system can damage brake system parts so soon your brakes will not work well.
Page 424: Battery
Brake Pedal Travel Battery See your dealer if the brake pedal does not return to Your new vehicle comes with a maintenance free normal height, or if there is a rapid increase in ® ACDelco battery. When it is time for a new battery, get pedal travel.
Page 425: Jump Starting
CAUTION: CAUTION: Batteries have acid that can burn you and gas Batteries can hurt you. They can be dangerous that can explode. You can be badly hurt if you because: are not careful. See Jump Starting on • They contain acid that can burn you. page 5-45 for tips on working around a battery •...
Page 426 1. Check the other vehicle. It must have a 12-volt 3. Turn off the ignition on both vehicles. Unplug battery with a negative ground system. unnecessary accessories plugged into the cigarette lighter or in the accessory power outlets. Turn off Notice: If the other vehicle’s system is not a 12-volt the radio and all the lamps that aren’t needed.
Page 427 CAUTION: CAUTION: Using a match near a battery can cause battery Fans or other moving engine parts can injure gas to explode. People have been hurt doing you badly. Keep your hands away from moving this, and some have been blinded. Use a parts once the engine is running.
Page 428 6. Connect the red 7. Don’t let the other end positive (+) cable to the touch metal. Connect it positive (+) terminal to the positive (+) of the vehicle with the terminal of the good dead battery. Use battery. Use a remote a remote positive (+) positive (+) terminal terminal if the...
Page 429 8. Now connect the black 9. Connect the other end negative ( ) cable to of the negative ( ) the good battery’s cable to the remote negative ( ) cable. Use negative ( ) terminal, a remote negative ( ) marked GND, on terminal if the the vehicle with the...
Page 430 To disconnect the jumper cables from both vehicles do the following: 1. Disconnect the black negative ( ) cable from the vehicle that had the bad battery. 2. Disconnect the black negative ( ) cable from vehicle with the good battery. 3.
Page 431: All-Wheel Drive
All-Wheel Drive To get an accurate reading, the vehicle should be on a level surface. Lubricant checks in this section also apply to these If the level is below the bottom of the ﬁller plug hole, vehicles. However, there are two additional systems that you’ll need to add some lubricant.
Page 432: Rear Axle
Rear Axle To get an accurate reading, the vehicle should be on a level surface. When to Check Lubricant The proper level for the 1500 Series is from 5/8 inch to 1 5/8 inch (15 mm to 40 mm) below the bottom of the ﬁller It is not necessary to regularly check rear axle ﬂuid plug hole.
Page 433: Four-Wheel Drive
Four-Wheel Drive To get an accurate reading, the vehicle should be on a level surface. Lubricant checks in this section also apply to these If the level is below the bottom of the ﬁller plug hole, vehicles. However, there are two additional systems that you’ll need to add some lubricant.
Page 434: Front Axle
Front Axle To get an accurate reading, the vehicle should be on a level surface. When to Check Lubricant If the level is below the bottom of the ﬁller plug hole, you may need to add some lubricant. It is not necessary to regularly check front axle ﬂuid When the differential is cold, add enough lubricant to unless you suspect there is a leak or you hear an raise the level to 0 to 3/8 inch (9.5 mm) below the ﬁller...
Page 435: Bulb Replacement
Bulb Replacement Headlamps For any bulb changing procedure not listed in this section, contact your dealer. See Replacement Bulbs on page 5-61 for the proper types of bulbs to use. Halogen Bulbs CAUTION: Halogen bulbs have pressurized gas inside and can burst if you drop or scratch the bulb. You or others could be injured.
Page 436: Front Turn Signal, Sidemarker And Daytime Running Lamps
Front Turn Signal, Sidemarker and Daytime Running Lamps A. Low-Beam Headlamp B. High-Beam Headlamp 2. Pull the headlamp assembly out. A. Sidemarker Lamp D. Daytime Running 3. Unplug the electrical connector. B. Retainer Clip Lamp 4. Turn the old bulb counterclockwise and remove it C.
Page 437: Side Identiﬁcation Marker Lamps
4. Press the locking release lever, turn the bulb socket Side Identiﬁcation Marker Lamps counterclockwise and remove the socket from the turn signal housing. 1. To expose the service slot, locate the lamp gasket near the rear wheel, and pull back the edge. 5.
Page 438: Roof Marker Lamps
Roof Marker Lamps 1. Remove the two screws and lift off the lens. 2. Remove the six screws on the center roof marker lamps. 3. Turn the old bulb counterclockwise to remove it from the socket. 5-58...
Page 439 4. Put a new bulb into the socket and turn clockwise until it locks in place. 5. Reinstall the lens and tighten the screws. 5-59...
Page 440: Taillamps
Taillamps 1. Use a tool to remove the two screws from A. Turn Signal Lamp the lamp assembly. B. Back-up Lamp C. Stoplamp 2. Remove the lamp assembly. 3. Press the release tab and turn the bulb socket counterclockwise to remove it from the taillamp housing.
Page 441: Replacement Bulbs
4. Pull the old bulb Replacement Bulbs straight out from the socket. Exterior Lamp Bulb Number Low-Beam Headlamps 9006 High-Beam Headlamps 9005 Daytime Running Lamps (DRL) 4114K Front Roof Marker Lamp Front Parking and Turn Lamp 3457A Rear Marker Lamp, Taillamp and 3157 Stop Lamp Rear Turn Lamp...
Page 442: Windshield Wiper Blade Replacement
Windshield Wiper Blade Replacement Windshield wiper blades should be inspected at least twice a year for wear and cracking. See Scheduled Maintenance on page 6-4 for more information. Replacement blades come in different types and are removed in different ways. For proper type and length, see Normal Maintenance Replacement Parts on page 6-14.
Page 443: Tires
Tires CAUTION: (Continued) Your new vehicle comes with high-quality tires made by a leading tire manufacturer. If you ever have questions • Underinﬂated tires pose the same danger about your tire warranty and where to obtain service, as overloaded tires. The resulting accident see your GM Warranty booklet for details.
Page 444 (A) Tire Size Code: The tire size code is a combination of letters and numbers used to deﬁne a particular tire’s width, height, aspect ratio, construction type and service description. See the “Tire Size Code” illustration later in this section for more detail. (B) Tire Performance Criteria Speciﬁcation (TPC Spec): Original equipment tires designed to GM’s speciﬁc tire performance criteria have a TPC speciﬁcation...
Page 445 (E) Tire Ply Material: The type of cord and number of plies in the sidewall and under the tread. (F) Uniform Tire Quality Grading (UTQG): Tire manufacturers are required to grade tires based on three performance factors: treadwear, traction and temperature resistance.
Page 446 (A) Tire Size: The tire size code is a combination of (E) Tire Identiﬁcation Number (TIN): The letters and letters and numbers used to deﬁne a particular numbers following DOT code are the Tire Identiﬁcation tire’s width, height, aspect ratio, construction type and Number (TIN).
Page 447: Tire Size
Tire Size (B) Tire Width: The three-digit number indicates the tire section width in millimeters from sidewall to sidewall. The following examples show the different parts of a (C) Aspect Ratio: A two-digit number that indicates tire size. the tire height-to-width measurements. For example, if the tire size aspect ratio is “75,”...
Page 448 (B) Tire Width: The three-digit number indicates the tire section width in millimeters from sidewall to sidewall. (C) Aspect Ratio: A two-digit number that indicates the tire height-to-width measurements. For example, if the tire size aspect ratio is “75,” as shown in item “C” of the illustration, it would mean that the tire’s sidewall is 75% as high as it is wide.
Page 449: Tire Terminology And Deﬁnitions
Tire Terminology and Deﬁnitions Cold Inﬂation Pressure: The amount of air pressure in a tire, measured in pounds per square inch (psi) or kilopascals (kPa) before a tire has built up heat Air Pressure: The amount of air inside the tire pressing from driving.
Page 450 Intended Outboard Sidewall: The side of an Occupant Distribution: Designated seating positions. asymmetrical tire, that must always face outward when Outward Facing Sidewall: The side of a asymmetrical mounted on a vehicle. tire that has a particular side that faces outward Kilopascal (kPa): The metric unit for air pressure.
Page 451 Sidewall: The portion of a tire between the tread and UTQGS: Uniform Tire Quality Grading Standards, a tire the bead. information system that provides consumers with ratings for a tire’s traction, temperature and treadwear. Ratings Speed Rating: An alphanumeric code assigned to a are determined by tire manufacturers using government tire indicating the maximum speed at which a tire testing procedures.
Page 452: Inﬂation - Tire Pressure
Inﬂation - Tire Pressure When to Check Check your tires once a month or more. The tire and loading information label, shows the correct inﬂation pressures for your tires when they’re cold. Also, check the tire pressure of the spare tire. “Cold”...
Page 453: Tire Pressure Monitor System
Tire Pressure Monitor System Driving on a signiﬁcantly under-inﬂated tire causes the tire to overheat and can lead to tire failure. Under-inﬂation also reduces fuel efficiency and tire tread The Tire Pressure Monitor (TPM) system uses radio life, and may affect the vehicle’s handling and stopping and sensor technology to check tire pressure levels.
Page 454 TPM Sensor Identiﬁcation Codes 3. Turn the exterior lamp switch from “Off” to “On” four times within 3 seconds. A double horn chirp will Each TPM sensor has a unique identiﬁcation code. Any sound and the TPM low tire warning light will begin to time you rotate your vehicle’s tires or replace one or ﬂash.
Page 455 6. Proceed to the right (passenger’s side) front tire, Federal Communications Commission and and repeat the procedure in step 5. Industry and Science Canada 7. Proceed to the right (passenger’s side) rear tire, The TPM system operates on a radio frequency subject and repeat the procedure in step 5.
Page 456: Tire Inspection And Rotation
Tire Inspection and Rotation Tires should be rotated every 5,000 to 8,000 miles (8 000 to 13 000 km). Any time you notice unusual wear, rotate your tires as soon as possible and check wheel alignment. Also check for damaged tires or wheels. See When It Is Time for New Tires on page 5-77 and Wheel Replacement on page 5-81 for more information.
Page 457: When It Is Time For New Tires
When It Is Time for New Tires CAUTION: One way to tell when it’s time for new tires is to check the treadwear Rust or dirt on a wheel, or on the parts to indicators, which will which it is fastened, can make wheel nuts appear when your tires become loose after a time.
Page 458: Buying New Tires
Buying New Tires CAUTION: To ﬁnd out what kind and size of tires you need, look at the Certiﬁcation/Tire label or the Tire and Loading Information label. See Loading Your Vehicle on Mixing tires could cause you to lose control page 4-56, for more information about these labels and while driving.
Page 459: Uniform Tire Quality Grading
The Uniform Tire Quality Grading system does not apply to deep tread, winter-type snow tires, space-saver CAUTION: or temporary use spare tires, tires with nominal rim diameters of 10 to 12 inches (25 to 30 cm), or to some limited-production tires. If you use bias-ply tires on your vehicle, the wheel rim ﬂanges could develop cracks after While the tires available on General Motors passenger...
Page 460: Wheel Alignment And Tire Balance
Traction – AA, A, B, C Warning: The temperature grade for this tire is established for a tire that is properly inﬂated and not The traction grades, from highest to lowest, are AA, A, overloaded. Excessive speed, underinﬂation, or B, and C. Those grades represent the tire’s ability excessive loading, either separately or in combination, to stop on wet pavement as measured under controlled can cause heat buildup and possible tire failure.
Page 461: Wheel Replacement
Wheel Replacement CAUTION: Replace any wheel that is bent, cracked or badly rusted or corroded. If wheel nuts keep coming loose, the wheel, wheel bolts and wheel nuts should be replaced. Using the wrong replacement wheels, wheel If the wheel leaks air, replace it (except some bolts or wheel nuts on your vehicle can be aluminum wheels, which can sometimes be repaired).
Page 462: Used Replacement Wheels
Used Replacement Wheels Tire Chains CAUTION: CAUTION: Putting a used wheel on your vehicle is If your vehicle has P265/75R16, LT265/75R16, dangerous. You can’t know how it’s been used P265/70R16 or P265/70R17 size tires, don’t use or how far it’s been driven. It could fail tire chains.
Page 463: If A Tire Goes Flat
Notice: If you have a tire size other than P265/75R16, A rear blowout, particularly on a curve, acts much like a LT265/75R16, P265/70R16 or P265/70R17 use tire skid and may require the same correction you’d use chains only where legal and only when you must. Use in a skid.
Page 464: Changing A Flat Tire
Changing a Flat Tire CAUTION: (Continued) If a tire goes ﬂat, avoid further tire and wheel damage by driving slowly to a level place. Turn on your 3. Turn off the engine and do not restart hazard warning ﬂashers. while the vehicle is raised. 4.
Page 465: Removing The Spare Tire And Tools
Removing the Spare Tire and Tools The following steps will tell you how to use the jack and change a tire. Yukon (Rear Access Panel) A. Tool Kit with Jack C. Wing Nut Holding Tools and Gloves Tire Blocks B. Retaining Bracket D.
Page 466 For Yukon, the equipment is located behind the left trim panel in the rear of the vehicle. Unlatch the release lever to open the trim panel door. Skip the ﬁrst step and follow the last three. For Yukon XL, the equipment you’ll need is under the storage tray in the left trim panel.
Page 467 1. If your vehicle is equipped with a hoist lock (J), open the spare tire lock cover on the bumper and use the ignition key to remove the lock. 2. Assemble the wheel wrench (H) and the two jack handle extensions (I) as shown. A.
Page 468 3. Insert the hoist end 5. The wheel wrench has (open end) (F) of the a hook that allows you extension through to pull the hoist the hole (G) in the rear cable towards you to bumper. assist in reaching the spare tire.
Page 469 Removing the Flat Tire and Installing the Spare Tire Use the following pictures and instructions to remove the ﬂat tire and raise the vehicle. 1. Remove the center cap by placing the chisel end of the wheel wrench in the slot on the wheel and gently prying the cap out.
Page 470 Jacking Locations (Overall View) 2. Use the wheel wrench to loosen all the wheel nuts. Turn the wheel wrench counterclockwise to loosen A. Front Position the wheel nuts. Don’t remove the wheel nuts yet. B. Rear Position Notice: If your vehicle has QUADRASTEER™ and you use a jack to raise the vehicle without positioning it correctly, you could damage the QUADRASTEER™...
Page 471 CAUTION: Getting under a vehicle when it is jacked up is dangerous. If the vehicle slips off the jack you could be badly injured or killed. Never get under a vehicle when it is supported only by a jack. CAUTION: Raising your vehicle with the jack improperly Front Position positioned can damage the vehicle and even...
Page 472 4. Remove all the wheel nuts and take off the ﬂat tire. 5. Remove any rust or dirt Rear Position 1500 Rear Position 2500 from the wheel bolts, Series Series mounting surfaces and spare wheel. Rear Tire Flat: If the ﬂat tire is on a rear tire of the vehicle, you’ll need to use the jack handle (C) and both jack handle extensions (D).
Page 473 6. After mounting the spare, put the wheel CAUTION: nuts back on with the rounded end of the nuts toward the wheel. Rust or dirt on the wheel, or on the parts to Tighten each wheel nut which it is fastened, can make the wheel nuts by hand.
Page 474 CAUTION: (Continued) Be sure to use the correct wheel nuts. If you have to replace them, be sure to get new GM original equipment wheel nuts. Stop somewhere as soon as you can and have the nuts tightened with a torque wrench to the proper torque speciﬁcation.
Page 475: Storing A Flat Or Spare Tire, Jack And Tools
Storing a Flat or Spare Tire, Jack and Tools CAUTION: Storing a jack, a tire, or other equipment in the passenger compartment of the vehicle could cause injury. In a sudden stop or collision, loose equipment could strike someone. Store all these in the proper place.
Page 476 1. Put the tire on the ground at the rear of the vehicle 4. Insert the hoist end (F) with the valve stem pointed down, and to the rear. through the hole (G) in the rear bumper and 2. Tilt the retainer (D) into the hoist shaft.
Page 477 To store the tools, follow these procedures: For Yukon, do the following: 1. Put the tool kit, with the jack tools and gloves, in the tool bag and place in the retaining clip above the jack. 2. Tighten down with the wing nut. 3.
Page 478 4. Use the retaining clip to fasten the tool kit on the stud in the storage compartment in the rear left trim panel and turn the wing nut clockwise to secure. 5. Return the storage tray. Yukon XL A. Bottle Jack E.
Page 479: Secondary Latch System
Secondary Latch System To release the spare tire from the secondary latch do the following: Your vehicle has an underbody mounted tire hoist assembly equipped with a secondary latch system. It’s designed to stop the spare tire from suddenly falling off your vehicle.
Page 480 4. Repeat this procedure at least two times. If the 7. Place the bottom edge of the jack on the wheel spare tire lowers to the ground, continue with blocks, separating them so that the jack is Step 5 of “Removing the Spare Tire and Tools” balanced securely.
Page 481 11. Lower the jack by turning the wheel wrench counterclockwise. Keep lowering the jack until the spare tire slides off the jack or is hanging by the cable. CAUTION: Someone standing too close during the procedure could be injured by the jack. If the spare tire does not slide off the jack completely, make sure no one is behind you or on either side of you as you pull the jack out...
Page 482: Spare Tire
13. Tilt the retainer at the Spare Tire end of the cable and pull it through the Your vehicle, when new, had a fully inﬂated spare tire. wheel opening. Pull the A spare tire may lose air over time, so check its tire out from under inﬂation pressure regularly.
Page 483: Appearance Care
Appearance Care • Paint Thinner • Turpentine Remember, cleaning products can be hazardous. Some • Lacquer Thinner are toxic. Others can burst into ﬂames if you strike a match or get them on a hot part of the vehicle. Some are •...
Page 484: Cleaning The Inside Of Your Vehicle
Cleaning the Inside of Your Vehicle Using Cleaner on Fabric 1. Vacuum and brush the area to remove any Use a vacuum cleaner often to get rid of dust and loose dirt. loose dirt. Wipe vinyl, leather, plastic and painted surfaces with a clean, damp cloth.
Page 485: Special Fabric Cleaning Problems
Special Fabric Cleaning Problems Cleaning Vinyl Stains caused by such things as catsup, coffee (black), Use warm water and a clean cloth. egg, fruit, fruit juice, milk, soft drinks, vomit, urine • Rub with a clean, damp cloth to remove dirt. You and blood can be removed as follows: may have to do this more than once.
Page 486: Cleaning The Top Of The Instrument Panel
Cleaning the Top of the Instrument Care of Safety Belts Panel Keep belts clean and dry. Use only mild soap and water to clean the top surfaces of the instrument panel. Sprays containing silicones CAUTION: or waxes may cause annoying reﬂections in the windshield and even make it difficult to see through the windshield under certain conditions.
Page 487: Cleaning The Outside Of Your Vehicle
Cleaning the Outside of Your Cleaning Exterior Lamps/Lenses Vehicle Use only lukewarm or cold water, a soft cloth and a car washing soap to clean exterior lamps and lenses. The paint ﬁnish on your vehicle provides beauty, depth Follow instructions under “Washing Your Vehicle.” of color, gloss retention and durability.
Page 488: Cleaning Aluminum Or Chrome-Plated Wheels
Wash the vehicle as soon as possible. If necessary, use Clean the outside of the windshield with a full-strength non-abrasive cleaners that are marked safe for painted glass cleaning liquid. The windshield is clean if beads do surfaces to remove foreign matter. not form when you rinse it with water.
Page 489: Sheet Metal Damage
Use chrome polish only on chrome-plated wheels, but Finish Damage avoid any painted surface of the wheel, and buff off immediately after application. Any stone chips, fractures or deep scratches in the ﬁnish should be repaired right away. Bare metal Don’t take your vehicle through an automatic car wash will corrode quickly and may develop into major repair that has silicone carbide tire cleaning brushes.
Page 490: Chemical Paint Spotting
Chemical Paint Spotting Vehicle Care/Appearance Materials Some weather and atmospheric conditions can create a See your GM dealer for more information on purchasing chemical fallout. Airborne pollutants can fall upon and the following products. attack painted surfaces on your vehicle. This damage Vehicle Care/Appearance Materials can take two forms: blotchy, ring-shaped discolorations, and small, irregular dark spots etched into the paint...
Page 491 Vehicle Care/Appearance Materials Vehicle Care/Appearance Materials (cont’d) (cont’d) Description Usage Description Usage Removes dirt and grime Medium foaming Chrome and Wire Wheel from chrome wheels and shampoo. Cleans and Cleaner wire wheel covers. Wash Wax Concentrate lightly waxes. Biodegradable and Removes dust, phosphate free.
Page 492: Vehicle Identiﬁcation
Vehicle Identiﬁcation Service Parts Identiﬁcation Label You’ll ﬁnd this label located in the glove box. It’s very Vehicle Identiﬁcation Number (VIN) helpful if you ever need to order parts. On this label is: • Your VIN • The model designation •...
Page 493: Electrical System
Electrical System Power Windows and Other Power Options Add-On Electrical Equipment Circuit breakers protect the power windows and other power accessories. When the current load is too heavy, Notice: Don’t add anything electrical to your the circuit breaker opens and closes, protecting the vehicle unless you check with your dealer ﬁrst.
Page 494: Instrument Panel Fuse Block
Instrument Panel Fuse Block The fuse block access door is on the driver’s side edge of the instrument panel. Pull off the cover to access the fuse block. To remove fuses, hold the end of the fuse between your thumb and index ﬁnger and pull straight out. Fuses Usage You may have spare fuses located behind the fuse...
Page 495 Fuses Usage Fuses Usage Four-Wheel Drive System, Left Turn Signals and LT TRN Auxiliary Battery Sidemarkers HTR A/C Climate Control System Vehicle Stoplamps, Brake VEH STOP Module, Electronic Throttle Power Door Lock Relay LOCK Control Module (Lock Function) RT TRLR ST/TRN Right Turn Signal/Stop Trailer Inside Rearview Mirror, HVAC 1...
Page 496: Center Instrument Panel Fuse Block
Center Instrument Panel Fuse Block Device Usage The center instrument panel utility block is located Ride Control Harness SL RIDE underneath the instrument panel, to the left of the Connection steering column. HDLR 2 Headliner Wiring Connector BODY Body Wiring Connector DEFOG Rear Defogger Relay HDLNR 1...
Page 497 Underhood Fuse Block The underhood fuse block in the engine compartment on the driver’s side of the vehicle near the battery. Lift the cover for access to the fuse/relay block. To remove fuses, hold the end of the fuse between your thumb and index ﬁnger and pull straight out.
Page 498 5-118...
Page 499 *1 — Gasoline Engine and Fuel Injection Rail #2. Fuses Usage *2 — Gasoline Engine and Fuel Injection Rail #1. Anti-Lock Brakes *3 — Gasoline Engine; Oxygen Sensors. VSES/ECAS Vehicle Stability *4 — Gasoline Engine; Oxygen Sensors. IGN A Ignition Power *5 —...
Page 500 Fuses Usage Fuses Usage Vent Solenoid RR DEFOG Rear Window Defogger Canister/Quadrasteer Module HDLP-HI Headlamp High Beam Relay Power PRIME Not Used RR HVAC Rear Climate Control Supplemental Inﬂatable Auxiliary Power AUX PWR Restraint System Outlet — Console Front Parking Lamps, IGN 1 Ignition Relay FRT PARK...
Page 501 Fuses Usage Fuses Usage HDLP-LOW Headlamp Low Beam Relay FOG LP Fog Lamps A/C COMP Air Conditioning Compressor HORN Horn Fuse Air Conditioning Compressor HORN Horn Relay A/C COMP Relay Windshield and Rear Window W/S WASH RR WPR Rear Wiper/Washer Washer Pump Relay RADIO Audio System...
Page 502: Capacities And Speciﬁcations
Capacities and Speciﬁcations Please refer to Recommended Fluids and Lubricants on page 6-12 for more information. All capacities are approximate. Capacities and Speciﬁcations Engine VIN Code Spark Plug Gap VORTEC™ 4800 V8 0.040 inches (1.01 mm) VORTEC™ 5300 V8 0.040 inches (1.01 mm) VORTEC™...
Page 503 After reﬁll, the level must be rechecked. See Cooling System on page 5-32. Cooling System Capacity Capacities Application English Metric Cooling System VORTEC™ 4800 V8 Automatic with front A/C 15.0 quarts 14.0 L VORTEC™ 4800 V8 Automatic with front and rear A/C 17.0 quarts 16.0 L VORTEC™...
Page 504 After reﬁll, the level must be rechecked. Add enough engine oil so that the ﬂuid is within the proper operating range. See Engine Oil on page 5-16. Capacities Capacities Application English Metric Engine Oil with Filter VORTEC™ 4800 V8 VIN V 6.0 quarts†...
Page 505 Section 6 Maintenance Schedule Maintenance Schedule ........6-2 Owner Checks and Services ......6-9 Introduction ...........6-2 At Each Fuel Fill ..........6-9 Maintenance Requirements ......6-2 At Least Once a Month ........6-9 Your Vehicle and the Environment ....6-2 At Least Once a Year ........6-10 Using Your Maintenance Schedule ....6-3 Recommended Fluids and Lubricants ....6-12 Scheduled Maintenance ........6-4...
Page 506: Maintenance Schedule
Maintenance Schedule Maintenance Requirements Notice: Maintenance intervals, checks, inspections, Introduction replacement parts and recommended ﬂuids and lubricants as prescribed in this manual are necessary Important: Keep engine oil at the proper level and to keep your vehicle in good working condition. Any change as recommended.
Page 507: Using Your Maintenance Schedule
Using Your Maintenance Schedule The services in Scheduled Maintenance on page 6-4 should be performed when indicated. See Additional Required Services on page 6-6 and Maintenance We at General Motors want to help you keep your vehicle Footnotes on page 6-7 for further information. in good working condition.
Page 508: Scheduled Maintenance
If you want to get service information, see Service If the engine oil life system is ever reset accidentally, Publications Ordering Information on page 7-12. you must service your vehicle within 3,000 miles (5 000 km) since your last service. Remember to reset Owner Checks and Services on page 6-9 tells you what the oil life system whenever the oil is changed.
Page 509 Scheduled Maintenance Service Maintenance I Maintenance II Change engine oil and ﬁlter. Reset oil life system. See Engine Oil on page 5-16. An Emission Control Service. Lubricate chassis components. See footnote #. Visually check for any leaks or damage. See footnote (j). Inspect engine air cleaner ﬁlter or change indicator (if equipped).
Page 510: Additional Required Services
Additional Required Services The following services should be performed at the ﬁrst maintenance service (I or II) after the indicated miles (kilometers) shown for each item. Additional Required Services 25,000 50,000 75,000 100,000 125,000 150,000 Service (41 500) (83 000) (125 000) (166 000) (207 500)
Page 511: Maintenance Footnotes
Additional Required Services (cont’d) 25,000 50,000 75,000 100,000 125,000 150,000 Service (41 500) (83 000) (125 000) (166 000) (207 500) (240 000) Replace spark plugs and inspect spark plug wires. An Emission Control Service. Engine cooling system service (or every 5 years, whichever occurs ﬁrst).
Page 512 (c) Visually inspect hoses and have them replaced if they (g) Add ﬂuid as needed. A ﬂuid loss could indicate a are cracked, swollen or deteriorated. Inspect all pipes, problem; repair as needed. Check vent hose at transfer ﬁttings and clamps; replace with genuine GM parts as case for kinks and proper installation.
Page 513: Owner Checks And Services
Owner Checks and Services Engine Coolant Level Check Check the engine coolant level and add These owner checks and services should be performed ® DEX-COOL coolant mixture if necessary. See Engine at the intervals speciﬁed to help ensure the safety, Coolant on page 5-26 for further details.
Page 514: At Least Once A Year
At Least Once a Year Automatic Transmission Shift Lock Control System Check Starter Switch Check CAUTION: CAUTION: When you are doing this inspection, the When you are doing this inspection, the vehicle could move suddenly. If the vehicle vehicle could move suddenly. If the vehicle moves, you or others could be injured.
Page 515 Ignition Transmission Lock Check Park on a fairly steep hill, with the vehicle facing downhill. Keeping your foot on the regular brake, set the While parked, and with the parking brake set, try to turn parking brake. the ignition key to LOCK in each shift lever position. •...
Page 516: Recommended Fluids And Lubricants
Recommended Fluids and Usage Fluid/Lubricant Lubricants Windshield ® Washer Solvent GM Optikleen Washer Solvent. Fluids and lubricants identiﬁed below by name, part GM Power Steering Fluid (GM Part number or speciﬁcation may be obtained from your Power Steering No. U.S. 89021184, in Canada dealer.
Page 517 Usage Fluid/Lubricant Usage Fluid/Lubricant SAE 75W-90 Synthetic Axle Front Axle Front Axle Lubricant (GM Part No. U.S. Propshaft (All-Wheel 12378261, in Canada 10953455) Spline or Spline Lubricant, Special Lubricant Drive) meeting GM Speciﬁcation 9986115. One-Piece (GM Part No. U.S. 12345879, in Propshaft Canada 10953511) or lubricant SAE 75W-90 Synthetic Axle...
Page 518: Normal Maintenance Replacement Parts
Normal Maintenance Replacement Parts Replacement parts identiﬁed below by name, part number, or speciﬁcation can be obtained from you dealer . Normal Maintenance Replacement Parts VIN Code 25010633** 25010633** 25010633** 25010633** 89028862** Oil Filter /PF44* /PF44* /PF44* /PF44* /PF454* Engine Air 25313348** 25313348** 25313348**...
Page 519 Normal Maintenance Replacement Parts (cont’d) VIN Code Wiper Blade Type ITTA ITTA ITTA ITTA ITTA (Rear) Wipe Blade 14 inches 14 inches 14 inches 14 inches 14 inches Length (Rear) (35.0 cm) (35.0 cm) (35.0 cm) (35.0 cm) (35.0 cm) ®...
Page 520: Maintenance Record
Maintenance Record After the scheduled services are performed, record the date, odometer reading, who performed the service and the type of services performed in the boxes provided. See Maintenance Requirements on page 6-2 in this section. Any additional information from Owner Checks and Services on page 6-9 can be added on the following record pages. Also, you should retain all maintenance receipts.
Page 521 Maintenance Record (cont’d) Odometer Maintenance I or Date Serviced By Services Performed Reading Maintenance II 6-17...
Page 522 Maintenance Record (cont’d) Odometer Maintenance I or Date Serviced By Services Performed Reading Maintenance II 6-18...
Page 523 Section 7 Customer Assistance and Information Customer Assistance and Information ....7-2 Reporting Safety Defects ........7-11 Customer Satisfaction Procedure ......7-2 Reporting Safety Defects to the United States Online Owner Center ........7-3 Government ..........7-11 Customer Assistance for Text Telephone (TTY) Reporting Safety Defects to the Canadian Users ............7-4 Government ..........7-12 Customer Assistance Offices ......7-4...
Page 524: Customer Assistance And Information
Your satisfaction and goodwill are important to windshield.) your dealer and to GMC. Normally, any concerns with the sales transaction or the operation of your vehicle will • Dealership name and location be resolved by your dealer’s sales or service...
Page 525: Online Owner Center
The BBB Auto Line Program is an out of court program Online Owner Center administered by the Council of Better Business Bureaus to settle automotive disputes regarding vehicle repairs or The Owner Center is a resource for your GM ownership the interpretation of the New Vehicle Limited Warranty.
Page 526: Customer Assistance For Text Telephone (Tty) Users
To assist customers who are deaf, hard of hearing, or Detroit, MI 48232-5172 speech-impaired and who use the Text Telephones 1-800-GMC-8782 (462-8782) (TTYs), GMC has TTY equipment available at its 1-800-GMC-8583 (462-8583) (For Text Telephone Customer Assistance Center. Any TTY user can devices (TTYs))
Page 527: Gm Mobility Program For Persons With Disabilities
All Overseas Locations GM Mobility Program for Persons with Disabilities Please contact the local General Motors Business Unit. Mexico, Central America and This program, available to Caribbean Islands/Countries (Except qualiﬁed applicants, can reimburse you up to $1,000 Puerto Rico and U.S. Virgin Islands) toward eligible aftermarket General Motors de Mexico, S.
Page 528: Roadside Assistance Program
Flat Tire Change: Installation of a spare tire will be Assistance prompt) covered at no charge. (The customer is responsible As the proud owner of a new GMC vehicle, you are for the repair or replacement of the tire if not automatically enrolled in the GMC Roadside Assistance covered by a warrantable failure.)
Page 529: Courtesy Transportation
• Location of the vehicle • Model, year, color, and license plate number GMC has always exempliﬁed quality and value in its offering of motor vehicles. To enhance your ownership • Mileage, Vehicle Identiﬁcation Number, and delivery experience, we and our participating dealers are...
Page 530: Plan Ahead When Possible
When your vehicle requires warranty service, you Warranty service can generally be completed while you should contact your dealer and request an appointment. wait. However, if you are unable to wait, GMC helps By scheduling a service appointment and advising minimize your inconvenience by providing several your service consultant of your transportation needs, transportation options.
Page 531: Additional Program Information
Courtesy Rental Vehicle Courtesy Transportation is available only at participating dealers and all program options, such as shuttle Your dealer may arrange to provide you with a courtesy service, may not be available at every dealer. Please rental vehicle or reimburse you for a rental vehicle contact your dealer for speciﬁc information about you obrtained if your vehicle is kept for a warranty repair.
Page 532: Vehicle Data Collection And Event Data Records
Vehicle Data Collection and Event In a crash or near crash event, computer systems, such as the Airbag Sensing and Diagnostic Module (SDM) in Data Records your vehicle may record information about the condition of the vehicle and how it was operated, such as engine Your vehicle, like other modern motor vehicles, has a speed, brake applications, throttle position, vehicle number of sophisticated computer systems that monitor...
Page 533: Reporting Safety Defects
In addition, once GM collects or receives data, GM may Reporting Safety Defects • use the data for GM research needs, • Reporting Safety Defects to the make it available for research where appropriate conﬁdentiality is to be maintained and need is United States Government shown, or •...
Page 534: Reporting Safety Defects To The Canadian Government
In addition to notifying NHTSA (or Transport Canada) in a situation like this, we certainly hope you’ll notify us. RETAIL SELL PRICE: $50.00 Please call us at 1-800-GMC-8782 (1-800-462-8782), or write: Pontiac-GMC Customer Assistance Center P.O. Box 33172...
Page 535: Service Bulletins
Service Bulletins Current and Past Model Order Forms Service Bulletins give technical service information Service Publications are available for current and needed to knowledgeably service General Motors cars past model GM vehicles. To request an order form, and trucks. Each bulletin contains instructions to please specify year and model name of the vehicle.
Page 536 NOTES 7-14...
Page 537 ® All-Wheel Drive with Stabilitrak ......2-33 AM ............. 3-137 Accessory Power Outlets ......... 3-21 AM-FM Radio ..........3-78 Adding Washer Fluid ........5-40 Antenna, Fixed Mast ........3-139 Additional Program Information ......7-9 Antenna, XM™ Satellite Radio Antenna Additives, Fuel ..........5-6 System .............
Page 538 Audio System(s) (cont.) Battery Run-Down Protection ......3-20 Radio with CD ..........3-81 Battery Warning Light ........3-45 Radio with Six-Disc CD ......3-108 Before Leaving on a Long Trip ......4-43 Rear Seat Audio (RSA) ....... 3-134 Before You Drive ........... 3-122 Setting the Time for Radios with Radio Data Before You Go Off-Roading ......
Page 539 Bulb Replacement (cont.) Center Passenger Position, Safety Belts ..... 1-37 Replacement Bulbs ........5-61 Chains, Tires ..........5-82 Roof Marker Lamps ........5-58 CHANGE ENGINE OIL ........3-71 Side Identiﬁcation Marker Lamps ....5-57 Check Taillamps ............ 5-60 Engine Light ..........3-51 Buying New Tires ...........
Page 540 Child Restraints (cont.) Climate Control System (cont.) Securing a Child Restraint in the Right Front Rear Air Conditioning and Heating System, Seat Position ........... 1-68 Electronic ..........3-38 Top Strap ........... 1-55 Rear Air Conditioning System ......3-34 Top Strap Anchor Location ......1-57 Compass Calibration .......
Page 541 Customer Assistance Information (cont.) Driving Reporting Safety Defects to the United States At Night ............. 4-36 Government ..........7-11 City ............4-41 Roadside Assistance Program ......7-6 Defensive ............. 4-2 Service Publications Ordering Information ..7-12 Drunken ............4-2 Freeway ............. 4-42 Hill and Mountain Roads ......
Page 542 Entry Lighting ..........3-19 Environmental Concerns ........4-25 Easy Exit Seat ..........2-65 ® Erasing HomeLink Buttons ......2-58 Electrical System Event Data Records (EDR) ......7-10 Add-On Equipment ........5-113 Exit Lighting ........... 3-19 Fuses and Circuit Breakers ......5-113 Express-Down Windows ........
Page 543 Folding the Seatback ........1-16 Folding the Seatbacks ....... 1-9, 1-11, 1-21 Gage Following Distance .......... 4-72 Engine Coolant Temperature ......3-49 Four-Wheel Drive ........2-28, 5-53 Fuel ............3-57 Four-Wheel-Drive Light ........3-56 Oil Pressure ..........3-55 Front Axle ............5-54 Speedometer ..........
Page 544 Headlamps ............ 5-55 Bulb Replacement ........5-55 If No Steam Is Coming From Your Engine ..5-31 Front Turn Signal, Sidemarker and Daytime If Steam Is Coming From Your Engine ....5-30 Running Lamps ........5-56 If the Light is Flashing ........3-53 Halogen Bulbs ..........
Page 545 Light (cont.) Passenger Air Bag Status Indicator ....3-43 Lamps Safety Belt Reminder ........3-42 Exterior ............3-15 Tire Pressure ..........3-51 Interior ............3-19 Tow/Haul Mode ........... 3-56 Lamps On Reminder ........3-17 Traction Off ..........3-48 Lap Belt ............1-38 Lighted Visor Vanity Mirror .......
Page 546 Mexico, Central America and Caribbean Islands/ Countries (Except Puerto Rico and U.S. Virgin Maintenance Schedule Islands) ............7-5 Additional Required Services ......6-6 Mirrors At Each Fuel Fill ........... 6-9 Automatic Dimming Rearview with Compass At Least Once a Month ........6-9 and Temperature Display ......
Page 547 Overheated Engine Protection Operating Mode (V8 Engines Only) ........5-29 Odometer ............3-42 Owner Checks and Services ......6-9 Off-Road Driving ..........4-22 Owners, Canadian ..........ii Off-Road Recovery .......... 4-19 Owner’s Information ........7-13 Engine ............5-16 Pressure Gage ..........3-55 OIL LIFE RESET ..........
Page 548 Power Radios (cont.) Accessory Outlets ........3-21 Radio with Six-Disc CD ......3-108 Door Locks ..........2-9 Rear Seat Audio ........3-134 Electrical System ........5-113 Setting the Time for Radios with Radio Data Lumbar Controls ........... 1-5 Systems (RDS) ........3-78 Seat ............
Page 549 Rearview Mirror, Automatic Dimming with Restraint System Check ® OnStar , Compass and Temperature Display ..2-44 Checking Your Restraint Systems ....1-87 Rearview Mirrors ..........2-43 Replacing Restraint System Parts After Reclining Seatbacks .......... 1-6 a Crash ..........1-88 Reclining the Seatbacks ........
Page 550 Safety Belts (cont.) Securing a Child Restraint (cont.) Right Front Passenger Position ...... 1-37 Right Front Seat Position ......1-68 Safety Belt Extender ........1-44 Security While You Travel ........7-6 Safety Belt Use During Pregnancy ....1-36 Select Button ..........3-69 Safety Belts Are for Everyone .......
Page 551 Side Impact Air Bags ........1-78 Storage Areas (cont.) Skidding ............4-21 Rear Storage Area ........2-62 Some Other Rainy Weather Tips ....... 4-40 Storing a Flat or Spare Tire, Jack and Tools ..5-95 Spare Tire ............ 5-102 Stuck in Sand, Mud, Ice or Snow ...... 4-50 Special Fabric Cleaning Problems ....
Page 552 Tire Size ............5-67 Traction Tire Terminology and Deﬁnitions ......5-69 Assist System (TAS) ........4-9 Tires ............. 5-63 Off Light ............. 3-48 ® Buying New Tires ........5-78 Stabilitrak System ........4-11 Chains ............5-82 TRACTION ACTIVE ........3-76 Changing a Flat Tire ........
Page 553 Underhood Fuse Block ........5-117 Warning Lights, Gages and Indicators ....3-40 Understanding Radio Reception ....... 3-137 Warnings Uniform Tire Quality Grading ......5-79 DIC Warnings and Messages ......3-70 United States ........... 7-4 Hazard Warning Flashers ....... 3-6 Used Replacement Wheels ......5-82 Other Warning Devices ........
Page 554 When to Inspect ..........5-21 When You Are Ready to Leave After Parking XM™ Satellite Radio Antenna System ....3-139 on a Hill ............. 4-74 XM™ Satellite Radio Service (48 Contiguous Where to Put the Restraint ....... 1-54 US States) ..........3-93 Why Safety Belts Work ........

This manual is also suitable for:

Yukon xl 2004 yukon xl 2004 yukon

GMC YUKON XL 2004 Owner's Manual

Section 2 Features and Controls

Features and Controls

Mirrors

Onstar System

Homelink Transmitter

Storage Areas

Sunroof

Vehicle Personalization

Section 3 Instrument Panel

Instrument Panel Overview

Climate Controls

Warning Lights, Gages and Indicators

Driver Information Center (DIC)

Audio System(S)

Section 4 Driving Your Vehicle

Your Driving, the Road, and Your Vehicle

Towing

Quick Links

Chapters

Related Manuals for GMC YUKON XL 2004

Summary of Contents for GMC YUKON XL 2004