Réglementations - Brother 1435 - HL B/W Laser Printer Manual De Configuration Rapide

Réglementations
Federal Communications Commission (FCC) Declaration of
Conformity (Pour les Etats-Unis)
Responsible Party: Brother International Corporation
100 Somerset Corporate Boulevard
P.O. Box 6911
Bridgewater, NJ 08807-0911
USA
Telephone: (908) 704-1700
declares, that the products
Product name: Laser Printer HL-1430, HL-1435
Model number: HL-14
complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Important
A shielded interface cable should be used in order to ensure compliance with
the limits for a Class B digital device.
Changes or modifications not expressly approved by Brother Industries, Ltd.
could void the user's authority to operate the equipment.
Déclaration de conformité aux prescriptions de Industry
Canada (pour le Canada)
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
Perturbations radioélectriques (modèle 220-240 volts
uniquement)
Cette imprimante satisfait à la norme EN55022 (Publication CISPR 22)/
Classe B.
Pour mettre ce produit en service, il convient d'utiliser un câble d'interface à
double blindage et à paire torsadée portant la marque "IEEE 1284 compliant"
[conforme à IEEE 1284]. Ce câble ne doit pas faire plus de 2,0 mètres de
long.
2
Déclaration de conformité pour la CE
Fabricant
Brother Industries Ltd.,
15-1, Naeshiro-cho, Mizuho-ku,
Nagoya 467-8561, Japon
Usine
Brother Corporation (Asie) Ltd.,
Brother Buji Nan Ling Factory,
Golden Garden Ind., Nan Ling Village,
Buji Rong Gang Shenzhen, Chine
déclarent par la présente que :
Description du produit : Imprimante laser
Nom du produit : HL-1430, HL-1435
Modèle : HL-14
est conforme aux dispositions des Directives appliquées, à savoir :
Directive en matière de basses tensions 73/23/EEC (telle que modifiée par
93/68/EEC) et Directive en matière de compatibilité électromagnétique 89/
336/EEC (telle que modifiée par 91/263/EEC, 92/31/EEC et 93/68/EEC).
Normes respectées :
Harmonisées :
Sécurité : EN60950 : 1992
A1 : 1993, A2 : 1993, A3 : 1995,
A4 : 1997, toutes : 1997
CEM : EN55022 : 1998 Classe B
EN61000-3-2 : 1995 / A1 : 1998 + A2 : 1998
EN61000-3-3 : 1995
EN55024 : 1998
Année durant laquelle le label CE a été apposé : 2003
Délivré par : Brother Industries, Ltd.
Date : 25 décembre 2002
Lieu : Nagoya, Japon
Signature :
Takashi Maeda
Responsable
Groupe Audit Qualité
Service de gestion de la qualité
Société Information & Document
Déclaration de conformité au programme international E
®
S
TAR
L'objectif du programme international
le développement et la vulgarisation de matériels de bureau à faible
consommation d'énergie.
En sa qualité d'associé au programme international
Brother Industries, Ltd. confirme que ce produit répond aux directives
prescrites par ledit programme en matière d'efficacité énergétique.
Laser Safety (Modèle 100-120 volts uniquement)
This printer is certified as a Class 1 laser product under the U.S. Department
of Health and Human Services (DHHS) Radiation Performance Standard
according to the Radiation Control for Health and Safety Act of 1968. This
means that the printer does not produce hazardous laser radiation.
Since radiation emitted inside the printer is completely confined within
protective housings and external covers, the laser beam cannot escape from
the machine during any phase of user operation.
NERGY
E S ®
NERGY TAR est de promouvoir
®
E S
NERGY TAR ,