Page 1
FlexiSpot The Ergonomics Leader Healthy Body and Mind f-h Flexi Spot The Ergonomics Leader Healthy Body and Mind Website: www.flexispot.com Item E7QB Tel: 1-855-585-5618 User Manual flexispot.com/support Address: 6475 Las Positas Rd. Livermore, 94551...
Page 2
The Ergonomics Leader NTENTS Diagram of Components Accessory List Installation Troubleshooting and Attention Warranty...
Diagram of Components Parts Included The Ergonomics Leader Parts Parts Supporting beamx2 Keypadxl Control boxxl Side bracket Lifting columnx4 Power plugxl Cable management net xl Feetx2 Accessory Package Please contact customer service if there are any accessories or tools missing. String net hook T-Screwdriver Zip tie...
31.5" 35.4" 800mm - 900mm Installation Process Pre-installation Guide Tips: Use the two small blue boxes in the package to cushion the beam easier installation. Assemble a foam Get a friend for help Prepare a drill flexispot.com/support to prevent scratch...
Page 5
Installation Process Installation Process The Ergonomics Leader Step step Fx16 Better drill Adjust the length of the supporting beam Affix the tabletop a) Turn over the frame. Loosen the four screws of the frame and stretch the frame. Fix the screws in the sequence b) When there are holes on the table top, the beams are stretched to align with the holes;...
Page 6
Installation Process Installation Process The Ergonomics Leader Step 4 Step Dx16 Ex16 Install the leg columns Attach feet Fasten screws seen.
Page 7
Installation Process Installation Process The Ergonomics Leader step step Better drill Better drill Fix the keypad Attach control Tips: You can install the keypad on either dege depending on your hand preference. Left-handed install here Right-handed install here Better drill Better drill...
Page 8
Installation Process Installation Process The Ergonomics Leader Step Step Better drill Connect the wires Install the string net hook Tips: When the table board has holes, the position of the hook is charity according to the holes; Connection of the same color.
Page 9
Installation Process Installation Process The Ergonomics Leader Step Step Attach cable management Finished: Turn over the desk, make sure the keypad is facing upwards along the process.
Use-I Use-2 The Ergonomics Leader LED display Up and down 3 height preset Memory Adjust the sensitivity of the anti-collision function To adjust the sensitivity of the anti-collision function, keep pressing "A" and "v" simultaneously for 5s to alternate among level I, 2, 3 or off. indicator levels as follows:...
Troubleshooting-I Attention The Ergonomics Leader This list is used for checking and solving common faults and errors. Please contact the manufacturer if problem •Power supply: ACI OOV - 240V, frequency 50/60HZ; encounter is not on the list below. •Working environment: 320 - 1040 F;...
Page 12
AND FLEXISPOT SHALL NOT BE LIABLE FOR ANY INCIDENTAL, INDIRECT, FlexiSpot will replace at no charge to the consumer the defective parts only or, at FlexiSpot's option, replace any product or SPECIAL, OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO LOSS...
Need help?
Do you have a question about the E7QB and is the answer not in the manual?
Questions and answers